I’ve made, tested and refined my own version of S&S disable. I did it a bit differently than the guy on eBay: 4 wires, with an extra one to monitor the LED (e.g. in my Giulia if I switch the car off briefly it remembers; the other guy’s solution would then turn S&S back on — I check first and if it’s not needed I don’t simulate pressing the button). You can deactivate it, etc. After reprogramming it ends in the programmed state. I also made it as an adapter that plugs in between the light panel and the car loom. Here’s a presentation of an early beta from the first tests:
https://photos.app.goo.gl/JgrybWLBoJ64jHNw6
I’m wondering now how many would be interested and what price would be acceptable. Bear in mind this is a niche market, and it definitely can’t cost below 120 if it’s to be a finished, professionally made product, not some throwaway. I’m not interested in selling a handful — if I’m to do this as a real business, that means a dedicated, neat enclosure, dedicated PCB, outsourcing soldering/testing to a technician (I don’t have time to do it myself) and selling via an online shop. Ideally I’d like to make it as a ready adapter that plugs in between the looms, like in my prototype now, except I didn’t have the right plug so only the terminals are inserted and zip-tied so they don’t slide out — the final product would need proper connectors (which I might have made, at least based on some standard connector components I use now — but that means cost and design work for both plugs). I don’t know if people would be into that, and how much it would push up the price. I could also do a simple version with 4 wires spliced into the loom by soldering or quick-splices (or 3 wires — in software I can disable LED monitoring; that’s also programmable).
Please comment here on the forum. I won’t do one-offs — as I said, I don’t have the time. Installation is simple, but I probably won’t be doing installs either — if the business takes off, I’ll arrange with a few workshops in Poland to handle it.