• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Disabling start/stop

I installed our colleague epsonix’s contraption about half a year ago and finally got around to a review :) Worth it...

You’re so much less stressed when the engine doesn’t stall. I once had an Opel (yes, I’m ashamed) and it had this little issue where it would sometimes stall at idle. Couldn’t be fixed. It scarred me, so start/stop drove me up the wall :)

Now I sleep better at night :)
(it extends the battery’s life and mine)
 
Thanks for the kind words, and I’m glad I’m looking after your good sleep too
 
I’ve had it from epsonix for over a year and… I forgot the car even has S&S — AWESOME!!!!!
 
I looked into this quickly after picking up the car :D

Do you remove it before dealer services, or just leave it in permanently and forget about it?
I take it that in MY2021 you still can’t disable it permanently? Good thing the button to turn it off isn’t in the trunk or under the hood…
A friend has a Civic and says it’s right next to the shifter…
 
As far as I know, once someone puts it in they leave it. You can always temporarily deactivate it, and taking it out is a minute’s work anyway, so it’s up to you.
 
@epsonix
Are there videos in Polish on your shop’s website too? Because the video about the anti-theft product is only in English.
 
Not for that one, actually—apparently there wasn’t time to record two separate videos. Maybe turn on auto captions/translation. You can basically see what you need even without sound, and the rest is described in the features.
 
Yesterday I picked up the Giulia and the start/stop won’t engage, no matter if I press the button; the car’s warmed up and nothing. Am I lucky? Or is the battery already getting weak? It’s 4 years old. I need to swing by and have them test it.
 
Depends how you drive. If it’s local trips, the reported SoC is probably below 65% and S/S won’t engage.
 
So far I’ve only done a 250 km run after picking up the car, but I also sat in a traffic jam in Katowice for 15 minutes, moving up one car at a time, and still nothing. I’m fine with that.
 
It’ll charge up (often it also needs some time for the IBS to be happy), and S/S will catch you by surprise. That’s how it always is—if it works, it’s at a nonsensical moment: for example, when you’re rolling up to an intersection with a STOP sign, you stop for a second and set off right away because it’s clear or you just need to yield to one car, because the SoC happens to be above 65%; but it won’t kick in when you sit at a red light for a long time because the SoC doesn’t suit it, or there’s a big demand from the A/C controller to switch on the compressor, etc.
 
Hard to tell. From an electronics point of view, such a deactivator is dead simple. I once made one for fun and left it in when it worked. If anything, the only trickier part is reading the button to program whether it should operate or not (service mode) and storing that—not that it’s anything crazy, but it is a bit more work. Simply turning S/S off on power-up is trivial. The quality of the connectors may differ, because Chinese connectors are generally junk, whereas Epsonix uses top‑notch quality for everything. I’ve seen the Chinese ones on Ali for 10 dollars, and of course there’s the question of the warranty, which is practically non‑existent there.
 
I managed to grab one on a promo on Ali for 27 zł, so I took the risk. It arrived—very good build, plug quality flawless. Installation was a breeze. It works and I’ve already forgotten what Start&Stop is.
 
Programmable—in the sense that you can disable its action—or does it make SS-off permanent once you plug it in?
 
And with the Chinese one, if you first switch on just the ignition and only start the engine 5 seconds later, doesn’t it turn SS back on? A customer asked me how mine works, because his Chinese one behaves badly in that situation. He bought mine because it handles this and confirmed he’s happy.

The difference is probably like between a good branded wrench made in the EU and a Chinese Toya one from a big-box store for 10x less. Both supposedly do the same thing, but somehow one of them does it better and likely won’t ever let you down (e.g. my Proxxon tool set that I’ve been using as my main one for 15 years at home and in the car—it’ll outlive me; whereas some cheaper tools have failed at the first troublesome bolt/nut—e.g. a 17 mm socket from a cheap set spread/cracked while undoing a wheel bolt!!!). Same with tyres—multiple-fold differences, China vs premium. Well, everyone chooses what they think is enough for them, or accepts the risk.

As for the price differences, the Chinese probably cranked out a ton of them and are now offloading them ever cheaper—years ago they were offering them on Ali for 380 zł when I was selling mine for 275; last year for 80, then 60, and now shockingly 27... 12 individual wires loomed by a subcontractor (Helukabel German cable, Molex contacts, loomed by a company that produces harnesses for export) already cost me so much that if I added any margin, I’d have to charge 27 zł just for that; and then there’s the enclosure, milling, components, PCB, socket, plug, tape, label, assembly, testing (does the Chinese seller test every unit?), instructions, all the prep. Plus employees, office, ordering, sales, boxes, instructions, bags, etc. Costs add up; in the end you have to earn something, and even simple electronics (but well made in the EU), in low-volume production (currently 400 pcs/year), costs what it costs. I’ll add: top-grade, all branded materials and/or professional EU subcontractors. Nothing from China; only top global component suppliers, vetted, professional. It comes out to what it comes out to.

There won’t be any new non-advanced products like a bypass or S&S—because that’s where the Chinese jump on a finished idea; they can even copy fragments of my manuals or website descriptions into their product listings (some OCR’d from the manual and turned an o into a 0, haha, but word for word), and one Amazon listing for a Chinese SGW harness extension even uses photos of my own car and my product (which looks completely different) that I made a few years ago. They’re shameless jerks, and Amazon couldn’t care less about a report. That’s why from me it’ll only be more custom electronics—the kind you won’t buy from the Chinese—because you have to do longer R&D, have the car on hand for development, growth, support, improvements, etc.
 
Just two words from me—I bought two sets of SGW Bypass extension leads, one from our colleague epsonix and one from Viaken (kind of by the way, because I was also buying an ELM, I just tossed it into the cart “might come in handy”).
Viaken cables 4x cheaper. Unfortunately, the quality turned out to be dreadful.
After installing the Viaken set, one connector wouldn’t hold, so after a short drive I had a Christmas tree on the dash—it turned out one wire had slipped out. When I tried to fix it, the latch snapped off. I was fuming.
Plain cable, cheap plastic connectors and housings. The colleague’s has a nice braid, solid terminals, support.
+ better to buy a local product.
Some things aren’t worth skimping on, especially since we’re not talking a 3000 difference but 150 zł.
 
Thanks for the feedback. It’s nice to read confirmations of what’s always been my goal. I’ll immodestly admit I’ve been getting similar ones from all over the world for years now, and that motivates me and confirms I’m on the right track.

Let me add: the fact that a Chinaman sells (or dumps because he overproduced) S&S for a few dozen złoty while I have it at 325 zł doesn’t bother me at all and I’m not going to do anything about it. Same with bypasses or extensions. I’m not aiming to dominate the market for simple products—I made them to learn how to run a small manufacturing company end to end (because earlier, as a designer in a corporation, I did a slice—design and running it as lead/senior), shipping, an online store, exports outside the EU, gaining experience with even down-to-earth problems (there are always plenty), coordinating deliveries and subcontractors, planning, customer support, etc. Besides, there weren’t such products on the market, so it worked out nicely. And the goal is to make more advanced products—the kind where full R&D (not a demo) takes months—and then spread the cost/profit across 200–500 pcs/year over a few years. That’s what interests me: a bit bigger custom, highly specialized for the cars I like and drive, and something that also solves problems in my own car. So a bit of a hobby too (like 10%), because going from a hobby project to a production one takes a lot of effort, cost and time).
 
Amortyzatory
Back
Top