• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Disabling start/stop

I’ve been wondering since the beginning:
- after taking the car from the showroom, I got a message "start/stop inactive",
- after erasing the faults (5x turning the engine on/off), it appeared every time I pressed the start/stop deactivation button,
- I drove to the service (ADF Wrocław), they confirmed that it is inactive, said it’s not a fault and asked if they should activate it?
Of course I said yes no. I prefer it off.

Never again did the error appear, start/stop never turned on, pressing the deactivation button no longer caused the error.

I’m happy and puzzled - can you permanently deactivate/start-stop and do ASO know how to do it?
Or did they lie to me and there’s something wrong with this system, but since I don’t need it, it just doesn’t work ¯\_(ツ)_/¯
neither in VET nor in MES I saw such an option. the only change that ASO has RoVIC before the car’s release is turning off the logistical mode and that should be done. if it were as simple as they wrote I wouldn’t have made the deactivator module. on no forum did anyone mention such an option and even Lio doesn’t know anything about it and himself distributes my deactivators

- - - Updated - - -

I’ll humbly ask to add me to the list of those interested in the S&S module as well
I added everyone

- - - Updated - - -

And it seems like the battery :(
Although strange that even when charged it doesn’t work..

after charging for about 2 days SS didn’t work but then it started again. maybe some faults sitting in memory and block?
 
neither in VET nor in MES I saw such an option. the only change that ASO has RoVIC before the car’s release is turning off the logistical mode and that should be done. if it were as simple as they wrote I wouldn’t have made the deactivator module. on no forum did anyone mention such an option and even Lio doesn’t know anything about it and himself distributes my deactivators

- - - Updated - - -


I added everyone

- - - Updated - - -



after charging for about 2 days SS didn’t work but then it started again. maybe some faults sitting in memory and block?
But it works so poorly that it’s better when it doesn’t work.. it starts too quickly when you stand at lights, overall a mediocre purpose for this system’s operation this way.. In Opel it worked much better for me..

Sent from my SM-N950F using Tapatalka
 
But it works so poorly that it’s better when it doesn’t work.. it starts too quickly when you stand at lights, overall a mediocre purpose for this system’s operation this way.. In Opel it worked much better for me..

Sent from my SM-N950F using Tapatalka
maybe they focused on fuel consumption/emission CO2 tests with the SS operation and that’s why it’s so lousy; in my view the system shouldn’t be automatic at all and should have a button easily accessible on the steering wheel to turn the engine off/on
 
Mine already has the S&S module
installation took me about a minute (longer unpacking), because it came programmed to turn off S&S I simply wired it in in a minute iiiii... that’s where the installation ended :D

good-looking and gives a "pro" feel, small device fits where it should, great
always a few curses less after realizing that S&S activated at the first intersection

and maybe it sounds like crypto-advertising, but honestly I don’t care, I’m very satisfied ;))))
so Lechu thanks!

in the queue SGW Bypass...

in
 
I’m very glad the device suits you and you’re satisfied. Yes, I also don’t swear anymore because it doesn’t cut the engine exactly when I need to pull out of a subordinate road, the air conditioning cools when it should and not lie (as it does with the engine off), the battery charged better. Tomorrow I’ll work out the production documentation for the company that will install for me on automatics 120 units of boards, next week production, then testing (next week I’m making an automatic tester for this, previously I tested in my car these 5 prototypes), enclosing in the housing, labels and into bubbles/boxes. Next week I hope the site will be finished (the IT guy has a bit of a delay with other projects and mine is moving), and also some formalities with the bank about the rapid payments system, I hope the shop will open right on time as devices start hitting the warehouse shelves.

I’ll let you know when it’s ready to order.
 
After all, the last two or three pages are orders and basically VIP-level :)
 
Sure, VIP-level, I treat the forum as home, so every Alfaholic gets a 10% discount :)
 
Is it possible in Alfa to operate S&S with the brake pedal?
I can’t check because the car is at the service, but in the Mercedes I got as a replacement it works like this.
Light brake press – S&S off
Stronger brake press – S&S on
Hard brake press – the Hołd function engages (car stops after lifting foot from brake pedal)

In my opinion, a brilliant solution.

Sent from my TA-1021 using Tapatalka
 
no, the car must move slightly. you’re writing great, but in my opinion not entirely (though still better than what’s in Giulias/Stelvio) e.g. sometimes you need to brake harder at the last moment (in a traffic jam), then you don’t remember to immediately ease off once the car stops, and S&S catches you.
 
If possible, I’d also like to sign up for the SS module.

Regards
no problem, I’ll let you know when the online shop opens and give you a discount code for the shop
 
last Wednesday I delivered all components/documentation to the company that does the installation on automatons, but they told me the installation would be this week. I called today, they haven’t started yet, but assured it would be done this week. we’ll see how they proceed, once I get it I’ll send a few days and I can ship.
I’m about to have a meeting with the IT person who handles the site/online shop, I’ll check where we stand with this (Testing/functions from the list agreed) and whether anything big needs to be fixed or just filling contents/photos etc. I hope the shop will go live with fast transfers soon, then add credit cards, Twisto and PayPal purchases on credit.
So soon, I hope it will be early next week.
 
a small update. I picked up today from the company doing the installation 120 S&S switches:
20190905_125925.jpg
one random one for now I checked, now I’m going on weekend, but from Monday there will be programming, testing, enclosing in housings, stickers, packing into bubbles and with instruction/
installation scoop placed into boxes.

online shop shop.stuff4car.com in the phase of final changes/tests, I think it will go live on Sunday/Monday - for now you won’t access it yet.

For now there is a blog site stuff4car.com and I’m starting to post various information/articles there, some of which might interest you - you’re welcome to join.
 
I read the post about moving the seat away - great Epsonix, you describe it very nicely and clearly. I’ll be checking in!
 
thanks though I’m planning to have my wife read/edit it as I’m a bit of a Polish novice :)

I posted an article about the switch on the blog, if someone wants to watch the video presenting the device it’s in the article (video shot without any preparation/script but I think it will do).

Disabling Start&Stop in Alfa Romeo Giulia/Stelvio
 
no problem, you’re added. I’ll also send a PM notification when the shop opens - really close now - today the IT guy was supposed to handle testing the shipping system and the integrator, but something came up and tomorrow he’ll take care of it. S&S nearly ready too - stickers, testing, into the boxes and ready to ship.
 
Amortyzatory
Back
Top