• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

[Giulietta] Chiptuning.

Thanks for the reply. I see there is immediately talk about increasing power by 100%. Meanwhile I’d be satisfied with a maximum 170 hp from my 120.
 
Thanks for the reply. I see there is immediately talk about increasing power by 100%. Meanwhile I’d be satisfied with a maximum 170 hp from my 120.
If you’re interested only in that power, install the parts that MA has plus a program. Turbo 1446, optionally injectors, plus modification of your own or buying a cat from MA. IC from MA or QV fit with no major modifications. And you have your 170 HP.
 
Right now I have an IHI VL38 + QV cooler, tuned on RON95 I have 163 HP. Cinek said that on 98 the result would be better, because ignition is pulled back with 95.
 
So you changed only the turbo plus cooler and the ECU program. Does this include Port & Polish? How much did these changes with the program cost? Something like that is what I’m aiming for? How many miles have you run on this setup and what about fuel economy?
 
Waste of money on an IH IHI turbo kit.
The cost difference is too small.
And the gain isn’t much more than the program on your toys
 
Last edited:
AP2 you also forget about the Downpipe, intercooler, and intake. Well you should also replace the exhaust (mid+end)

For a setup up to 200 HP, no one does anything (at least not necessary). From RacInForum info, this engine has maps that are 'poorly' written in standard. I agree above that part.
 
So you changed only the turbo plus cooler and the tune. Does this count as P&P? How much did these changes with the program cost? Something like that is what I want? How many km have you already driven on this setup and what about fuel consumption?

There is P&P, with my work, on all parts new except the IC and pipes to it I kept it within 3000. I've done 1000 km so far, so not much I can say about consumption, it doesn't seem higher. But the dynamics are much better. Up to 2500 rpm there’s no big difference, and after that it’s really good. Piotriix - I don’t entirely agree here. It depends on what someone likes; I myself am a proponent of 'original' so I would be forced to look for a hard-to-access catalyst with MA instead of a downpipe, for over 1000 PLN, and I don’t feel like removing the catalytic converter, plus some hoses don’t fit completely (oil supply?), the turbine is also several hundred PLN more expensive. For 3000 PLN I have ~40 HP more, for about 4500-5000 PLN I would have ~70 HP - I don’t know what determines that there are mods for 190 HP and 210 HP. Everyone has to think it through themselves.
 
Thanks for all the replies and notes. Maybe someone will write about modding to 190 and 210 HP?
 
J/w I wrote. The cat can be modified by your own welding a different flange. Hoses can be extended with your own or bought used. Whether turbo used or IH or Garet is about the same cost. So at most 500 PLN more.
 
Last edited:
I’m now on an IHI VL38 + QV cooler, tuned on RON95 I have 163 HP.
Cinek said that for 98 the result would be better, because ignition retard at 95.

Thanks for the info. I’m just about to go to Cinsoftu for a program after changes to my 1.4 TB.
Turbo VL38 + intercooler FMIC
 
A thread about chiptuning, and as you can see, big projects are also being realized.
I’m interested in what I can achieve in a Julka with a 1.4 TB 120HP engine? Basically I’m focusing only on the chip, without turbo changes etc. Possibly replacing the IC for a bigger one, but that only if the power I achieve isn’t satisfying.
So please share some real examples of what can be safely done for the engine with a 1.4 120HP.
Cheers.
- Rafał
 
Rafał it depends what IHI you’ll have there 36-39
140-160HP
And remember early years often had a bonus in HP
 
Last edited:
Piotriix - IHI not ichi ;)
alces1 - here Piotriix is right, before the facelift they could have around 140HP, and with a small IHI chip basically it does nothing, because the limit is 140-145HP.
Maybe before tuning arrange to check what power you currently have.
 
Thanks for the reply. but what is "IHI"? First time I encounter this abbreviation...
Honestly 150HP would be enough for me, especially since this will be a car for my wife.
Cheers.
- Rafał
 
I have a question: 210k km is on the clock, the car after a chip is around 110k km, and nothing has been looked at in the turbo. In such a case would it be advisable to service the turbo. The mechanic said that if it burst it could cause trouble. What to do, drop the turbo and regen? Or maybe buy and install a Garrett 1446? Could it be instead of the IHI without major modifications on this program that is now IHI?
 
It sounds a bit like you want to replace a part prophylactically, even though there aren’t any problems with it ;d
 

Related threads

Amortyzatory
Back
Top