• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Chiptuning

Strange VTG discussion with Wa, they already did 2 units. I’ve driven it and map tuning gives a solid kick. Talk to Grześek, the owner of the company. The guy is a magician.
 
And something more...? Diesel or petrol done (chip up to 200 or 280 HP)? What gains? ..."already 2 units"... hmm probably barely two units. VTG is known for handling the Vag group...
 
Any news about real (safe) tuning limits for 2.0 280HP? Specifically which component limits it?

Essentially only the gearbox designed for ~350 Nm and then it may fail faster (i.e. at any moment from now up to 25 years). From practical dangerous things - with high tuning the gears wear much faster, and the brakes work the same as at 200HP
 
Essentially only the gearbox designed for ~350 Nm and then it may fail faster (i.e. at any moment from now up to 25 years). From practical dangerous things - with high tuning the gears wear much faster, and the brakes work the same as at 200HP

Here is an automatic transmission, designed for 500 NM
 
Pistons are forged, so there shouldn't be a problem here. US Eurocomoulision (?) is testing some mods now, reportedly 330+. They also offer a nice exhaust and intake.
 
...on the table... exactly. Soldering, opening, then leaks, moisture... and electronics drift. I’d rather drive stock and forget about power gains than decide on such risky tinkering. I don’t think users who drive year-old or newer Giulias would opt for openings of the computer like that...

Better to befriend someone in the dealer network and flash a 280HP software in place of 200HP

2.0TB can be done via OBD, Marelli MM10JA sits there (e.g., with KESS)
 
Exactly.
And even if you need to open the ECU, when re-sealing it it goes back to how it was originally. Soldering? That’s what positioning clamps and telescopic needles are for.
 
Project to 310HP in Giulietta 2.0 Veloce there’s already some time available among tuners, the harness for this car is expensive but also available without much problem :)

As for Giulietta 2.2 in Małopolska, @sdreo, we already did a joint project on this ECU and it isn’t particularly complicated :)
 
This is the 200 HP version released to 310 HP.

What difference does it make, it’s the same engine as in Veloce (280 HP), only with a different map. Also some cheaper version with mirror-cap lights. Simply marketing-wise, tuning from 200 HP to 310 HP looks better (wow 110 horses more, over 50% gain) than tuning from 280 HP to 310 HP (only 30 horses gain).
 
Simply marketing-wise, tuning from 200 HP to 310 HP looks better (wow 110 horses over 50% gain) than tuning from 280 HP to 310 HP (only 30 horses gain).
We don’t know what 280 HP tuning looks like. It’s only a 2.0 and four cylinders, so 400 HP from it won’t happen. In summary, such a large power increase for those with the 200 HP version is phenomenal given the 50k that must be spent, to have it Veloce. The only downside I see is drive to the axle with that much power. Breaking traction immediately cuts the gas, a version with the front-wheel-drive surely mitigates this effect, though.. In GB and the USA there is a 280 AWD version.
 
We don’t know what 280 HP tuning looks like. It’s only a 2.0 and four cylinders, so 400 HP from it won’t happen. In summary, such a large power increase for those with the 200 HP version is phenomenal given the 50k that must be spent, to have it Veloce. The only downside I see is drive to the axle with that much power. Breaking traction immediately cuts the gas, a version with the front-wheel drive surely mitigates this effect, though.. In GB and the USA there is a 280 AWD version.


why wouldn’t there be 400 HP from a 2.0? ;) everything is doable, it’s a matter of the investment value :)

https://www.youtube.com/watch?v=5DHoQAy1zxw
 
Amortyzatory
Back
Top