• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Chiptuning

well not exactly, the info I got from FCA in BB is that currently manufactured 200hp already differ by hardware. check and let me know.
Do you know anything besides one lambda less?

Sent from my EVA-L09 using Tapatalka
 
as I wrote in the original posts a good few weeks ago, besides lambda I don't know anything - the guy from FCA said at the time he didn't have time to look at anything else, and since then I haven't spoken to him. so we wait for Belfer to dig into the ePer and check what has changed
 
sqadra tuning offers software for version 2.0 200hp to 280, similarly autolusso in the UK (additionally they offer their own exhaust system, which gives a total of 320 hp).
Power creator offers ECU tuning for the 200hp version to 240 and the 280 version to 320. Personally I would choose autolusso (they have their own Giulietta for which they do the tuning) or wait for better results from Squadra. Veloce from 280 to 320. I would personally choose autolusso (they have their own Giulia to show) or wait for better results from Squadra.
 
Celtic tuning from the UK offers a remap of the Giulia Q to 570HP. They have their own Giulia Q on which they test. On the dyno they achieved 503HP, after the remap 570. They also offer a software change that in dynamic mode makes the exhaust as loud as in race.
 
As for petrol engines - the internet says that until February 2017 the 2.0 200 and 280 HP engines were identical. Now the difference is only 1 lambda less (i.e. the whole ancillary kit), but from an electronics perspective that's already a lot. The prospect is tempting - but the question is how the drivetrain will handle 40% more power (in Veloce is q4). A friend with a similarly tuned Passat V6 has already had the clutch replaced three times. Is the automatic the same? He also has his own software.
And in real conditions - there are people who claim (including me) that Giulietta TB120 drives better in normal use than MA170: somehow this engine stays more responsive and flexible up to about 120-130 km/h. Then the extra ponies start to show themselves.
 
In 280HP Veloce in the UK there is no Q4 only RWD (which not everyone there likes, whereas here the opposite), probably the same as in our 200HP RWD - on the main site there is a link to ePera, dig up the part numbers to confirm.
 
In the USA you can buy a Giulietta Ti with rear-wheel drive only, in the UK only that version, the drivetrain transfer works perfectly :)
 
the ZF automatic in both versions is the same, supposedly a safe torque buffer of 500-550 Newton-meters.
A difference of one lambda is not bad. The most important thing is that the pistons, rings and cylinder head are the same, you can go nuts :D
As mentioned earlier, RWD easily handles 280 HP.
The safest thing would be to wait with tuning for a year or two and study all major forums.

I will wait for modifications and fixes that alfa will be introduced during the summer break and I will come back to the topic of buying in 2018 (after a test drive with a Stinger).
 
So forged :) Does anyone know if replacing the pistons is problematic? Probably you need to remove and disassemble the engine.
 
So forged :) Does anyone know if replacing the pistons is problematic? Probably you need to remove and disassemble the engine.

You have to disassemble it and basically almost entirely. From below the oil pan down, crankshaft journals, from above you have to remove the cylinder head to pull out the pistons themselves.
 
pistons are not the problem - it’s more that they wear out other engine parts, and by themselves they are the most durable.
 
I suspect that if you don’t drive all the time or on the track, the lack of more durable pistons shouldn’t be a big issue. Especially if that 280 was only in the D
 
Last edited by a moderator:
I suspect that if you don’t floor it all the time or on the track, a less durable piston shouldn’t be a big problem. Especially if that 280 would be only in D.
Damn, but then the 280 versions wouldn’t get different pistons either.

I’m wondering what this difference is about, because I understand that forged is, for now, a guess.

Sent from my EVA-L09 using Tapatalka
 
The ZF automatic in both versions is the same, supposedly safe margin is 500-550 Nm.

The gearbox is the 8HP50, so margin is 500 Nm. In the Q it’s the 8HP75, so torque up to 750. It would be interesting whether it could be swapped in a normal way...
 
In chip tuning, it’s about boosting power to give a bit of joy, not about sports parameters. Replacing pistons, connecting rods and probably redesigning the exhaust system wouldn’t be much cheaper. If you want more under the pedal, 50k and you have factory 280 HP.

I’d love to hear from someone on the forum what their experience is with petrol or diesel chip tuning. Do we have a ban on faces?

Sent from iPhone via Tapatalk
 
Amortyzatory
Back
Top