• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

[Giulietta] Chiptuning.

This is the standard result for this engine after a remap. From about 170 to about 190.. 190-something (if someone has a nicely skewed dyno upward, it can reach 200).

Without intake and exhaust this is basically what one should expect.
 
This is the standard result for this engine after a remap. From about 170 to about 190.. 190-something (if someone has a nicely skewed dyno upward, it can reach 200).

Without intake and exhaust this is basically what one should expect.

thanks for the opinions. I roughly know that increases hover around these ranges. Since I’m a layman I’d like an opinion whether the curve on the chart looks okay according to you or whether I should adjust something?
 
thanks for the opinions. I roughly know that increases hover around these ranges. Since I’m a layman I’d like an opinion whether the curve on the chart looks okay according to you or whether I should adjust something?

That depends on personal preference. Are you part of the 'drive by torque from 1000 rpm' sect, or do you want to feel the shove from 4500 to 6000 rpm and explore the power peak at the end of the scale. Everyone has their preferences. For you it looks rather neutral, not particularly something, like a boosted stock.
 
whom do you recommend

and can someone recommend a workshop (Malopolska, Swietokrzyskie) that has already worked with the Giulietta 1.4 170, mainly I care about torque so it drives nicely from the bottom (used to strong diesel :))
 
Stay with what you have.. dual-mass flywheel and axles will thank you for it.
 
Stick with what you have... the dual-mass flywheel and axles will thank you for it.

So how is it with this 1.4? There are many opinions that 190-200 horsepower can be achieved without much fear. Or not? (I know the question may be stupid and naive, but I’m slowly considering increasing power and I’m looking for information anywhere I can)
 
So how is it with this 1.4? There are many opinions that 190-200 horsepower can be achieved without much fear. Or not? (I know the question may be stupid and naive, but I’m slowly considering increasing power and I’m looking for information anywhere I can)
My comment was about increasing torque to resemble a Diesel
 
Ah, right, you’re right - I didn’t quite understand at first, but now everything is clear, thanks.

And I have it. The car runs from 2,000 rpm. I was surprised myself, like a diesel. And the thread author says he’s from Gliwice. Welcome to a test drive.
 
And is it possible that MA 150 and 170 aren’t the same?

Sent from my URSUS C-360 3P

look it up in the ePer and confirm, but according to information from a guy who has the MA 150HP Sprint from 2015, not long after his car was produced they were already installing smaller turbos.
 
I have a 2018, the ePer doesn’t include my year. I’ll write down the part number, it will become clear.

Sent from my URSUS C-360 3P
 
I have a Sprint from Września 2015 and it seems I have a turbo of 170 HP according to the ePer no. 55248413. If that’s so, I understand that the difference between 150 HP and 170 HP is only the engine computer software. Then you can raise the power as for a 170 HP engine, i.e. somewhere up to 190 HP just by software.
 
On every turbo there is a nameplate with a number. Write it down and Uncle Google will tell the truth. Of the turbos I looked at, all of them had smaller turbos.
 
This shows in EPER by selecting model and engine. I’m aware that changes could have occurred, that there might be a different turbo for me. Today I’ll open the hood and check.

2019-05-27 08_41_31-FIAT KEYePER __ The FIAT Spare Parts Catalog.png
 
look it up in the ePer and confirm, but according to information from a guy who has MA 150HP Sprint from 2015, not long after his car was produced they were already installing smaller turbos.
Are you talking about me? ;) I have 1446 for sure, tested. Earlier they installed IHI. Sprint 2k15. I didn’t chip it, but I talked to Cinek as well as Conmira and even so they aren’t able to squeeze as much from 150 as from 170.. I don’t know why, they also can’t.
 
Last edited:
MA 150 here is the turbo. Somewhere I found MGT1446Z, but I won’t bet my hand on it.

55278506
812812-6
350.jpg


Sent from my URSUS C-360 3P
 
Last edited:
MA 150 here is the turbo. Somewhere I found MGT1446Z, but I won’t bet my hand on it.

55278506
812812-6
350.jpg


Sent from my URSUS C-360 3P

140 and 150 MA have smaller turbos and a different camshaft.
 
If what I googled is true, then the turbo is the same as in the 170. On a foreign forum, AlfaOwners perhaps, they say the only difference is in the software. Different camshaft? Exhaust?

Sent from my URSUS C-360 3P
 
Amortyzatory
Back
Top