• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

[Giulietta] Chiptuning.

Unfortunately to get the chart in Savari you have to pay an extra 100 euros, so I didn’t take advantage of that
What a rip-off, though clever

Sent from my EVA-L09 using Tapatalka
 
Not for the sheet alone, but for a proof of the completed work - you could say, and that’s the difference.
 
Not for the sheet alone, but for a proof of the completed work - you could say, and that’s the difference.

even more so. If you pay for engine tuning and for a specific result (usually companies advertise gains at a given stage), then if the job was done properly the proof, i.e., the chart, should be free. If someone doesn’t want to provide a chart or charges an prohibitive price for it, it’s as if they’re ashamed or not satisfied with the result of their work. That’s why I prefer our Polish proven tuning brands where not only are the prices lower but often the results are better, dyno before, after, and a chart without extra charges.
 
Not for the sheet alone, but for a proof of the completed work - you could say, and that’s the difference.

plain cleverness, I’d say. if you went there just to have a power test, you’d also have to pay another 100 euros for the chart. a disaster...
 
If I lived in Poland I’d probably go to Cinka, since my two previous Fiats were worked on by him and it was fine, but I live in Belgium and distance to Gliwice is a bit far; I had a program done at Savalu, one of the most recommended firms for Alfas and Fiats, and I’m happy, and the fact I don’t have a chart is hard to say, if I’m in Poland I’ll drive to a dyno and get a chart.
 
Did anyone test it on the 1.4 MA?
RaceChip

https://www.racechip.com/shop/alfa-...b-16v-multiair-1368ccm-170hp-125kw-250nm.html


Three levels
..203 HP300 Nm
+€129

210 HP313 Nm
+€249

218 HP325 Nm
+€479

In total 1 would be enough for me, protection against engine overload, one-year warranty on the engine up to €5,000 (condition below 100,000 km).
Childishly easy installation - it plugs under the boost sensor and atmospheric pressure sensor from what I saw.
Price very affordable - after the dynamometer graphs you can see that it scales upward percentage-wise, in a well-running engine nothing wrong with it.
30-day return, free shipping, overall more convenient than a tune, because when selling the car you can unplug the box or even on a daily basis you can keep the stock map.
 
Interesting! Only there is no engine warranty in PL.
Well, not in Poland, but anyway it’s not something that affects the look of this box, because I have over 100k km anyway.
I doubt it would be something shady, because otherwise no one would give a warranty; additionally there is electronic protection against engine overload, it monitors some parameters and after exceeding them it disables the box and the car returns to stock. It would be nice to go to a dyno and run tests of the stock and after plugging the box - how it looks in real life, but as I wrote, it percentually lifts the stock up, so the final power depends on the starting stock.
 
The proposal looks quite interesting. For 6-7 grand you get 20% more. I’m considering the Magneti Marelli Box. It’s a company that makes the ECU for this engine so it should work somehow.
This is interesting because after buying the box you download the program, plug in the box and download the map for a specific engine. There is also the option of additional power and torque adjustment on the computer, adjusting settings yourself, and there is a remote with two programs as well as a box switch and return to the factory map. If anyone has experience with this please share some info.
 
The proposal looks quite interesting. For 6-7 grand you get 20% more. I’m considering the Magneti Marelli Box. It’s a company that makes the ECU for this engine so it should work somehow.
This is interesting because after buying the box you download the program, plug in the box and download the map for a specific engine. There is also the option of additional power and torque adjustment on the computer, adjusting settings yourself and a remote with two programs as well as a switch back to the factory map. If anyone has experience with this please share some info.

If you’re buying, I have a harness and a remote for sale. for 100 PLN (ME300T, ME100T)
 
I had it in Mito 1.4 135 HP became 163 HP with the remote; I had three modes. You can set it yourself (best on a dyno) you change parameters with the remote, I recommend a module to increase throttle response that works together with the box and remote.
 
I had it in Mito 1.4 135 HP became 163 HP with the remote; I had three modes. You can set it yourself (best on a dyno) you change parameters with the remote, I recommend a module to increase throttle response that works together with the box and remote.

Do you have any chart? (graph)
 
Amortyzatory
Back
Top