• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Chiptuning.

Buddy from GG-car Będzin. V-tech dealer
Only they have a dyno so it’s dyno-tested in Kraków at V-tech because ESP cuts.
 
Tell me how much you increase the power in the 2.0 JTDM 170 hp?
Go to a tuner, pay, and leave that worry on his shoulders, because there aren’t any mega miracles there - after a few cars he knows what the potential is, uploads a test soft and after braking he sees what changed and how the engine reacted to those changes and based on that he modifies the soft for the specific unit. In NL from 170 they make 200 Ps and 390-420 Nm from 140 180i 390/420Nm.
 
Hello,

I’m accelerating to the soft in the Giulietta 1.4 TB 120 HP - question:

How much power and Nm have you forced as the owners of this engine?
 
Hello,

I’m accelerating to the soft in the Giulietta 1.4 TB 120 HP - question:

How much power and Nm have you forced as the owners of this engine?
First post of this topic.

Here you also have a thread in which I originally wrote my post, but the moderator started a new topic about Chiptuning and moved it from:
http://www.forum.alfaholicy.org/mito_giulietta/97124-savali_tuning_giulietty_1_4_tb_2010_a.html - the author of this topic also did 1.4 120KM.
 
Last edited:
Colleague I know what I’m writing about.
I have a bolt with a magnet. (please check the number didn’t change and the replacement date did not.)
There was a change of oil pan gaskets. from 3.1 to 3.5 liters.
To the message I’m not mistaken and I know what I’m talking about :).

I wanted to buy a magnetized cap you wrote about, according to eper for 1.4TB/1.4MA the number is 55184773, I ordered at FAP and it arrived - ordinary bolts without magnets as it was from factory. Another cap probably won’t fit at least according to eper. Are you sure the bolt you mention will fit the old MA sump? Eper gives the same number for 1.4 both 2010-2013 and 2013-2016 and it is the same ordinary bolt with a hole inside and no magnet - there are no others for this engine. If there really is some other magnetic one, please give its number from eper because I can’t find anything else.
 
Last edited:
I wanted to buy a magnetized cap you wrote about, according to eper for 1.4TB/1.4MA the number is 55184773, I ordered at FAP and it arrived - ordinary bolts without magnets as it was from factory. Another cap probably won’t fit at least according to eper. Are you sure the bolt you mention will fit the old MA sump? Eper gives the same number for 1.4 both 2010-2013 and 2013-2016 and it is the same ordinary bolt with a hole inside and no magnet - there are no others for this engine. If there really is some other magnetic one, please give its number from eper because I can’t find anything else.


Tomorrow at work I’ll check :)
 
I had a moment last week and did a light soft modification at a friend’s. Not much could be done, and at least I didn’t want to dig deeper. Differences between cold engine and warm reach about 10 km on measurements. In stock it was 170-175, now it’s about 195 with good wind. And 40 Nm more. Always something, just a pity the difference is noticeable only above 3k rpm.

wykres Alfa_2.jpg

And two things came out. First, my Giulietta had a speed limiter set to 200 km/h. I don’t know if that’s standard or if someone slapped the limiter on mine, but at least I found out why it didn’t want to go faster :).
Second, did anyone brake Giulietta on Dynamic? The plots are from Neutral, because when the car enters the brake dynamometer, the rear wheels stay in place and the car throws an ABS/ESP error, switches to emergency mode and disables the D mode. We replaced the sensor in the rear wheel, nothing helped. Does anyone have experience, a plan? I’d like to brake it in D just to satisfy my curiosity whether it still gets that boost or not.
 
First I hear that Julie has a speed limiter - maybe the previous owner modded it hard, because factory wouldn’t have released such. Giulietta 170 HP easily reaches 200 and up to 220 indicated in favorable conditions without much hesitation (not fast, but firm). Then every km/h is painful.

The jump from around 170 HP to around 190 HP is normal and achievable without big surgery. Grats. :)

To brake in D you have to go to a dynamometer where both axles rotate. That is, the rear is accelerated by the front, and the front by the wheels. I think ESP is hard to fool.

Was it on V gear that it was braked?
 
The previous owner certainly didn’t mod anything, it was simply set to 200 and it stubbornly wouldn’t go higher. The nav max showed 204.
Braked in 4th gear, supposedly the best ratio for the test. In 5th it’s longer and the car gets hit harder.
 
or temporarily toggling the settings from D to N and braking
 
And two issues came out. First, my Julka had the speed limiter set to 200 km/h. I don’t know if this is standard, or if someone put a muzzle on mine, but at least I found out why it didn’t want to go any faster :).
In AlfaOBD you can set the maximum speed limit yourself in several variants (there used to be an option to disable the torque limiter to 40%), but this is possible only in Bosch ME7.9.10. In Marelli 8GMF (MA) it isn’t possible, but if there was a factory block you can remove it with the function "deactivation of the limiter" so if someone thinks it’s not enough on the highway, you should get rid of it ;). Maybe for some countries they introduced such limits or for learner drivers? :)
 
Last edited:
This option disables the mode in which the car leaves the factory on a tow truck and goes to the showroom:) so like a starting mode so the staff don’t go wild right away and the car behaves as in emergency mode
 
I had a moment last week, so I did a light software modification at a friend’s place. Not much could be done, and at least I didn’t want to tinker more. Differences between cold and warmed-up engine reach about 10 km in measurements. In stock it was 170-175, now it’s about 195 with favorable winds. And 40 Nm more. Always something, it’s a pity the difference is noticeable only above 3k RPM.

View attachment 200402

And two issues came out. First, my Julka had the speed limiter set to 200 km/h. I don’t know if this is standard, or if someone put a muzzle on mine, but at least I found out why it wouldn’t go further :). Secondly, did anyone brake Julka on Dynamic? The charts are from Neutral, because when the car enters the dynamometer with load, the rear wheels stay stationary and the car throws an ABS/ESP error, switches to emergency mode and disables the D mode. We replaced the rear ABS sensor, nothing helped. Does anyone have any experience or ideas? I’d love to brake it in D to satisfy my curiosity whether it still gets this boost or not.

And how about intake air temperature after the software? I mean, on such hot days as we had recently does the car puff up faster under hard driving? Because I’ll also be doing a program but I’m wondering whether to start with installing a proper FMIC. The stock one visible through the bumper seems small. Does anyone know if the QV had a bigger IC and whether it fits as a plug-and-play for the 1.4 or if you’d rather get a kit from fmic.pl?
 
QV has a bigger one than the 1.4, but I don’t know if the move makes sense. Bigger IC -> bigger intake volume -> slower throttle response with the same turbo. It’s better to focus on temperature measurements than to blindly change the IC.
 
Amortyzatory
Back
Top