• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Chiptuning.

177k. Meaning noticeable wear symptoms I’ve observed from 170k, harder to move without jerks, sometimes the car subtly swayed when decelerating, the chip only showed how big the wear is :) It’s drivable, gears go in normally, but dynamic is a bit useless.
 
From my knowledge and experience a load dyno is more accurate, but on the inertial one the torque tends to be overestimated. But the main thing is there is an increase :rolleyes:
 
From what year did the 159 tbi get a different gearbox than the M32?
 
From what year did the 159 tbi get a different gearbox than the M32?
I know nothing about other gearboxes. I have a 159 produced in April 2010 and it has the M32 (at least it looks like it from the outside housing - I saw recently with Cinka an M32 from a diesel - it looked the same). Only it differs a bit from the one I had in the 1.9JTDM from 2005 - for example it takes less oil (according to the manual 2.0 instead of 2.3L). The gearbox also behaves quite differently. Therefore I wonder if in the TBI there was already some modified/improved version of the M32, because it really gives a much better impression than the one from 2005.

I have a friend with a 159 TBI produced at the end of June 2011, I checked his VIN in ePer, and the gearbox is the same - part number 55221474.
 
Someone on alfaowners wrote that the late production of the 159 tbi used a different gearbox. But the late production is indeed 2010-2011. You hardly hear that these gearboxes in the tbi fail.
 
Someone on alfaowners wrote that the production end of the 159 JTS went with a different gearbox. But the production end is indeed 2010-2011. It’s rarely heard that those gearboxes fail in the JTS.
The TBI generally isn’t that much; besides, it’s the youngest 9-gear. Time will tell whether it’s better or if they improved something in the M32. In my case, as for bearings, it’s quiet, the gearbox runs pretty nicely, for now I added 200 ml of Archoil 9100 on top of what was drained during the oil change + soon I’ll add another 200-300 ml of oil (bought, but waiting for a VIN), so it’s like many experts recommend, i.e., to mix 0.5 liters more than the manual says for the M32.
 
Does your Julia (Jul) also have this gearbox 32?
 
Does your Julia (Jul) also have this gearbox 32?

If you’re asking me, then in the Giulietta the gearbox is completely different, but I have no idea which one - in any case it looks different.
 
I think Julkas had the C365 or some Fiat-type ones on the C...
I looked again at the gearbox in the Giulietta. It says FPT, so the gearbox is Fiat PowerTrain. Out of curiosity I googled for a moment and it turns out that in all Giuliottas they used the same model C635. Designed for up to 350 Nm, so in most Julias (except QV) there’s a good margin for modding the gearbox.
 
Last edited:
But more durable

Sent from my Nexus 5 using Tapatalk
 
In the Julia is the same gearbox as in the Bravo? At my dad’s Fiat it was replaced twice under warranty, such failures.
 
Yes, the C 635 gearbox is mounted in
Bravo, Doblo, 159 2.0 136 HP, Giulietta.
I have this gearbox exactly in the Doblo and Julia and in my opinion as for its work it’s worse than the M32.
My main complaints are clunks when changing gears and problems with first and second gear, especially when cold.
 
Amortyzatory
Back
Top