• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

error during PROXI alignment

D

daniels_74

Guest
Hello to all Alfamaniacs!
I have recently become the owner of an Alfa Romeo 159 1.9JTD. This is my first Alfa. When buying it I didn’t pay attention to the flickering odometer. On this forum I read that PROXI Alignment should be performed. I’m somewhat experienced with car electronics, so I bought the original FiatEcuScan program. Unfortunately the alignment does not end successfully. Analyzing the log files I noticed this entry:
PROXI Alignment Procedure
Writing CAN configuration data ...
Writing to module: Body Computer Node (NBC)SUCCESS!
Writing to module: Dashboard Node (NQS)SUCCESS!
0
0
Writing to module: Info-Telematic/Convergence Node (NIT/NCV)FAILED!
Writing to module: Driver Door Node (NPG)SUCCESS!
Writing to module: Climate Control Node (NCL)SUCCESS!
Writing to module: Passenger Door Node (NPP)SUCCESS!
Writing to module: Steering Lock Node (NBS)SUCCESS!
FAILED TO EXECUTE

I’m wondering what Info-Telematic/Convergence Node means. Probably it’s the communications node. I suspect the previous owner swapped the radio from Navi to a standard one. I’d be grateful for any information.
Regards
 
Is the odometer still flashing? Which version of FES do you have? First scan the CAN — a flashing odometer always leaves a trace in the log. Paste the logs to the forum. Info-Telematics is the Navi unit.
 
Last edited:
Hi, thanks for the reply. The odometer is still flashing, I have FES version 2.7.2, I also changed the language of FES but it didn’t help. You wrote that Info-Telematic is part of Navi, and this car doesn’t have Navi. It has a normal radio. Below I’m pasting the complete log:
Reading CAN configuration data ...
CAN CONFIGURATION DATA:
04 32 97 FB 04 32 97 FB 00 00 00 00 00 00 00 00 00 00 00 00
04 32 97 FB 00 22 05 89 04 32 97 FB 00 22 05 89 00 22 05 09
32 31 31 34 30 30 30 34 33 34 36 4F 55 54 50 55 54 2D 4A 49 54 20 06 04 26 FB 97 32 04 89 05 22 00 C3 60 00 07 B7 00 34 10 00 00 94 06 01 00 01 06 08 00 00 22 50 57 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 45 40 B2 88 00
CURRENTLY CONFIGURED CAN MODULES:
Body Computer Node (NBC)
Engine Control Node (NCM)
Dashboard Node (NQS)
Steering Wheel Controls Node (NVO)
Receiver Radio/Radio Navigator Node (NRR/RMN)
Brake System Node (NFR)
Info-Telematic/Convergence Node (NIT/NCV)
Driver Door Node (NPG)
Boot Node (NVB)
Climate Control Node (NCL)
Steering Angle Sensor Node (NAS)
Side Acceler./Yaw Node (NYL)
Passenger Door Node (NPP)
Passive Entry Node (NPE)
Steering Lock Node (NBS)
Airbag Node (NAB)
CURRENTLY AVAILABLE CAN MODULES:
Body Computer Node (NBC)
Engine Control Node (NCM)
Dashboard Node (NQS)
Steering Wheel Controls Node (NVO)
Receiver Radio/Radio Navigator Node (NRR/RMN)
Brake System Node (NFR)
Info-Telematic/Convergence Node (NIT/NCV)
Driver Door Node (NPG)
Boot Node (NVB)
Climate Control Node (NCL)
Steering Angle Sensor Node (NAS)
Side Acceler./Yaw Node (NYL)
Passenger Door Node (NPP)
Passive Entry Node (NPE)
Steering Lock Node (NBS)
Airbag Node (NAB)
CAN MODULES THAT REQUIRE EOL PROGRAMMING:
Body Computer Node (NBC)
Dashboard Node (NQS)
Info-Telematic/Convergence Node (NIT/NCV)
Driver Door Node (NPG)
Climate Control Node (NCL)
Passenger Door Node (NPP)
Steering Lock Node (NBS)
2011-03-28 16:58:03
CONNECTED TO:
ALFA 159 1.9 MJET 8V
CAN Setup / PROXI Alignment Procedure
--------------------------------------------------------------

CURRENTLY CONFIGURED CAN MODULES::
Body Computer Node (NBC):
Engine Control Node (NCM):
Dashboard Node (NQS):
Steering Wheel Controls Node (NVO):
Receiver Radio/Radio Navigator Node (NRR/RMN):
Brake System Node (NFR):
Info-Telematic/Convergence Node (NIT/NCV):
Driver Door Node (NPG):
Boot Node (NVB):
Climate Control Node (NCL):
Steering Angle Sensor Node (NAS):
Side Acceler./Yaw Node (NYL):
Passenger Door Node (NPP):
Passive Entry Node (NPE):
Steering Lock Node (NBS):
Airbag Node (NAB):
:
CURRENTLY AVAILABLE CAN MODULES::
Body Computer Node (NBC):
Engine Control Node (NCM):
Dashboard Node (NQS):
Steering Wheel Controls Node (NVO):
Receiver Radio/Radio Navigator Node (NRR/RMN):
Brake System Node (NFR):
Info-Telematic/Convergence Node (NIT/NCV):
Driver Door Node (NPG):
Boot Node (NVB):
Climate Control Node (NCL):
Steering Angle Sensor Node (NAS):
Side Acceler./Yaw Node (NYL):
Passenger Door Node (NPP):
Passive Entry Node (NPE):
Steering Lock Node (NBS):
Airbag Node (NAB):
:
CAN MODULES THAT REQUIRE EOL PROGRAMMING::
Body Computer Node (NBC):
Dashboard Node (NQS):
Info-Telematic/Convergence Node (NIT/NCV):
Driver Door Node (NPG):
Climate Control Node (NCL):
Passenger Door Node (NPP):
Steering Lock Node (NBS):

EXECUTING ADJUSTMENT...
PROXI Alignment Procedure
Writing CAN configuration data ...
Writing to module: Body Computer Node (NBC)SUCCESS!
Writing to module: Dashboard Node (NQS)SUCCESS!
0
0
Writing to module: Info-Telematic/Convergence Node (NIT/NCV)FAILED!
Writing to module: Driver Door Node (NPG)SUCCESS!
Writing to module: Climate Control Node (NCL)SUCCESS!
Writing to module: Passenger Door Node (NPP)SUCCESS!
Writing to module: Steering Lock Node (NBS)SUCCESS!
FAILED TO EXECUTE


greetings
 
A bit off-topic, but in reference to another post on this forum I have the following questions:

- does the remote close the windows automatically,
- and is the signal for unbuckled seat belts deactivated?

Thanks in advance for the answers :)
 
A bit off-topic, but in reference to another post on this forum I have the following questions:

- does the remote close the windows automatically,
- and is the signal for unbuckled seat belts deactivated?

Thanks in advance for the answers :)

Hello, when the seat belts aren’t buckled I hear a rattle :) and regarding the windows I haven’t checked yet
pzdr
 
Hello, thanks for the reply. The odometer is still flashing, I have FES version 2.7.2, I also changed the FES language but it didn’t help. You wrote that Info-Telematic is part of Navi and this car doesn’t have Navi. It has a normal radio.
Let’s start with the connection to ECU-CAN INFO:

In FES from the SYSTEM menu select BODY, from the ECU menu select CAN INFO and press F10

Check CAN errors because so far you attached logs from CAN SETUP. If you have an error you won’t be able to do proxy without first clearing the error ;-)

what about fuses, are all of them intact?
 
Hello, I’m attaching CAN INFO
2011-03-29 20:31:45
CONNECTED TO:
ALFA 159 1.9 MJET 8V
CAN Info
--------------------------------------------------------------

List of configured control units:
Body Computer (NBC): Present
Engine Control (NCM): Present
Electric Steering (NGE): Absent
Instrument Cluster (NQS): Present
Steering Wheel Controllers (NVO): Present
Radio Receiver / Navigation with maps (NRR / RMN): Present
Braking System (NFR): Present
Info-Telematics / Convergence Node (NIT / NCV): Present
Driver Door Node (NPG): Present
Trunk/Wearable storage (NVB): Present
Air Conditioning (NCL): Present
Automatic Transmission (NCA-NCR): Absent
Turn Signal Steering Angle Sensor (NAS) C-CAN: Present
Parking brake control node (NPB): Absent
Roof node (NIM): Absent
Sway/Forward Collision (NYL): Present
Adaptive Cruise Control Node (NAC): Absent
Passenger Door Node (NPP): Present
Driver Position Node (NAG): Absent
Brake Control Node (NBA): Absent
Passive Entry: Present
Steering Lock Node (NBS): Present
Gear Shift Selector Node (NSC): Absent
Passenger Position Node (NAP): Absent
Parking Sensor Node (NSP): Absent
Engine Signals Node (NSM): Absent
Air Bag Node (NAB): Present
Air Suspension Node (NMA): Absent
Roll Control Node (NPS): Absent
Auto-Adaptative Headlights Node (NFA): Absent
Torus Control Node (HALF): Absent
:
list of ECUs that were responsible:
Body Computer (NBC): Active
Engine Control (NCM): Active
Electric Steering (NGE): Not active
Instrument Cluster (NQS): Active
Steering Wheel Controllers (NVO): Active
Radio Receiver / Navigation with maps (NRR / RMN): Active
Braking System (NFR): Active
Info-Telematics / Convergence Node (NIT / NCV): Active
Driver Door Node (NPG): Active
Trunk/Wearable storage (NVB): Active
Air Conditioning (NCL): Active
Automatic Transmission Node (NCA-NCR): Not active
Turn Signal Steering Angle Sensor (NAS) C-CAN: Active
Parking Brake Control Node (NPB): Not active
Roof Node (NIM): Not active
Sway/Forward Collision (NYL): Active
Adaptive Cruise Control Node (NAC): Not active
Passenger Door Node (NPP): Active
Driver Position Node (NAG): Not active
Brake Control Node (NBA): Not active
Passive Entry: Active
Steering Lock Node (NBS): Active
Gear Shift Selector Node (NSC): Not active
Passenger Position Node (NAP): Not active
Parking Sensor Node (NSP): Not active
Engine Signals Node (NSM): Not active
Air Bag Node (NAB): Active
Air Suspension Node (NMA): Not active
Roll Control Node (NRC): Not active
Self-adaptive Headlamps Node (NFA): Not active
Haptical Lane Feedback Node (HALF): Not active

Regards
 
needed "CAN errors" and the version of the interface.
- and it lacks the FES one (below is only an example because it’s from ELM ver 1.3

"also I tryied to test my interface inside FES and these are the results :

COMMAND: ATZ
RESPONSE: ATZ ELM327 v1.3a
COMMAND: ATE0
RESPONSE: ATE0 OK
COMMAND: ATL0 RESPONSE: OK
COMMAND: ATH0 RESPONSE: OK
COMMAND: ATSPC RESPONSE: OK
COMMAND: ATS0 RESPONSE: OK
COMMAND: ATCAF0 RESPONSE: OK
COMMAND: ATCFC0 RESPONSE: OK
COMMAND: ATCRA 7B0 RESPONSE: OK
COMMAND: ATSH 7B0 RESPONSE: OK
COMMAND: ATAT1 RESPONSE: OK
COMMAND: ATST41 RESPONSE: OK
COMMAND: ATBI RESPONSE: CAN ERROR
COMMAND: ATZ RESPONSE: ELM327 v1.3a
"
 
Last edited:
I also have an error during the alignment procedure:

EXECUTING ADJUSTMENT...
PROXI Alignment Procedure
Writing CAN configuration data ...
Writing to module: Body Computer Node (NBC)SUCCESS!
Writing to module: Engine Control Node (NCM)SUCCESS!
Writing to module: Electric Steering Node (NGE)SUCCESS!
Writing to module: Dashboard Node (NQS)FAILED!
Writing to module: Steering Wheel Controls Node (NVO)SUCCESS!
Writing to module: Receiver Radio/Radio Navigator Node (NRR/RMN)SUCCESS!
Writing to module: Brake System Node (NFR)SUCCESS!
0
Writing to module: Info-Telematic/Convergence Node (NIT/NCV)FAILED!
Writing to module: Driver Door Node (NPG)SUCCESS!
Writing to module: Boot Node (NVB)SUCCESS!
Writing to module: Climate Control Node (NCL)SUCCESS!
Writing to module: Automatic Transmission Node (NCA-NCR)SUCCESS!
Writing to module: Steering Angle Sensor Node (NAS)SUCCESS!
Writing to module: Parking Brake Control Node (NPB)SUCCESS!
Writing to module: Ceiling Node (NIM)SUCCESS!
Writing to module: Side Acceler./Yaw Node (NYL)SUCCESS!
Writing to module: Adaptive Cruise Control Node (NAC)SUCCESS!
Writing to module: Passenger Door Node (NPP)SUCCESS!
Writing to module: Driver Seat Node (NAG)SUCCESS!
Writing to module: Assisted Braking Node (NBA)SUCCESS!
Writing to module: Passive Entry Node (NPE)SUCCESS!
Writing to module: Steering Lock Node (NBS)FAILED!
Writing to module: Gearbox Selector Node (NSC)SUCCESS!
Writing to module: Passenger Seat Node (NAP)SUCCESS!
Writing to module: Parking Sensor Node (NSP)SUCCESS!
Writing to module: Engine Signals Node (NSM)SUCCESS!
Writing to module: Airbag Node (NAB)SUCCESS!
Writing to module: Air Suspension Node (NMA)SUCCESS!
Writing to module: Roll Control Node (NRC)SUCCESS!
Writing to module: Self-adaptive Headlamps Node (NFA)SUCCESS!
Writing to module: Haptical Lane Feedback Node (HALF)SUCCESS!
FAILED TO EXECUTE


The counter stopped blinking, blue&me still invisible. CAN bus shows no errors, ECU had a misfire spark plug error - I cleared it. Proxy alignment still does not work - the same error.
FES version 2.6, switched to English
 
Current version of FES is 3.3, so I would recommend trying a newer one. In changes since version 2.6 there were multiple mentions that the PROXI alignment procedure has been corrected.
 
I’m refreshing the topic with a question whether PROXI alignment can improve/fix/correct faulty average fuel consumption readings. The computer underreads by about 1.5 liters compared to reality. I’ll add that I recently replaced the flow meter and the pressure sensor which could have influenced this, but neither did and the computer still misreads. Generally nothing is blinking and everything works and indicates correctly (except average fuel consumption).
 
Of course I’m considering that and even talked about it with Marek Staszewski (Masters tuning) who said that theoretically the computer should show correct values. Recently I began diagnosing myself by relying on your opinions and eliminating faults. For example I visited an authorized service with a problem of turbo gauge reading sticking out and was told that after a chip it could be like this. Of course that's not true and after reading a few posts I replaced the boost pressure sensor and everything is OK and not to mention my problems with a terrible starting and dual-mass flywheel ( http://www.forum.alfaholicy.org/159...zruch_szokujace_doswiadczenie.html#post593872 ) . So now I’m trying to determine what could cause the computer readings for average consumption to be off. I hope with your help I’ll resolve this issue :)
 
Strange phenomenon, because the computer calculates consumption based on injector opening time and practically only on that. If someone corrected the map and lengthened injector opening times - the computer should recalculate the doses correctly. Check the injectors’ operation - whether any of them has a strongly negative trim - that would mean it might be injecting too much fuel and physically the car would consume more fuel than the computer uses for calculations.
 
You cannot tune your fuel consumption with the proxy procedure.
This procedure serves completely different purpose.
 
Strange phenomenon, because the computer calculates consumption based on injector opening time and practically only on that. If someone corrected the map and lengthened injector opening times - the computer should recalculate the doses correctly. Check the injectors’ operation - whether any of them has a strongly negative trim - that would mean it might be injecting too much fuel and physically the car would consume more fuel than the computer uses for calculations.

Thanks Tomek for the reply. Of course I will check the injector trims. Two days ago I corrected the IMA code on the 4th injector because it was incorrect and I thought it could be the cause but the computer still indicates wrongly.

---------- Post added at 12:19 ---------- Previous post was at 12:17 ----------

You cannot tune your fuel consumption with the proxy procedure.
This procedure serves completely different purpose.
I suspected that and without a hint I didn’t want to run this procedure unnecessarily. Thanks for the reply.
 
Gentlemen I’m bringing up the topic again.
I have the identical issue as the colleague in the first post :/
Can info
2017-01-20 14:31:22
CONNECTED TO:
Alfa Romeo 159 1.9 JTDm 8V
CAN Info
--------------------------------------------------------------

List of configured ECUs:
Body Computer (NBC): Present
Engine Control Unit (NCM): Present
Electric Power Steering (NGE): Absent
Instrument Cluster (NQS): Present
Steering Wheel Switch Node (NVO): Present
Radio / Navigation with Maps Node (NRR/RMN): Present
Braking System Node (NFR): Present
Info-Telematics / MS Convergence Node (NIT/NCV): Present
Driver Door Node (NPG): Present
Trunk Node (NVB): Present
Air Conditioning Node (NCL): Present
Automatic Transmission Node (NCA-NCR): Absent
Steering Angle Sensor Node (NAS) C-CAN: Present
Parking Brake Control Node (NPB): Absent
Roof Console Node (NIM): Absent
Lateral Tilt / Side Acceleration Node (NYL): Present
Adaptive Cruise Control Node (NAC): Absent
Passenger Door Node (NPP): Present
Driver Seat Node (NAG): Absent
Assistive Braking Node (NBA): Absent
Passive Entry: Present
Steering Lock Node (NBS): Present
Gear Shift Node (NSC): Absent
Passenger Seat Node (NAP): Absent
Parking Sensor Node (NSP): Absent
Engine Signals Node (NSM): Absent
Airbag Node (NAB): Present
Air Suspension Node (NMA): Absent
Roll/Incline Control Node (NPS): Absent
Adaptive Headlights Node (NFA): Absent
Driveline Control/HALF Node (HALF): Absent
:
ECUs that responded:
Body Computer (NBC): Active
Engine Control Unit (NCM): Active
Electric Power Steering (NGE): Not Active
Instrument Cluster (NQS): Active
Steering Wheel Switch Node (NVO): Active
Radio / Navigation with Maps Node (NRR/RMN): Active
Braking System Node (NFR): Active
Info-Telematics / MS Convergence Node (NIT/NCV): Active
Driver Door Node (NPG): Active
Trunk Node (NVB): Active
Air Conditioning Node (NCL): Active
Automatic Transmission Node (NCA-NCR): Not Active
Steering Angle Sensor Node (NAS) C-CAN: Active
Parking Brake Control Node (NPB): Not Active
Roof Console Node (NIM): Not Active
Lateral Tilt / Side Acceleration Node (NYL): Active
Adaptive Cruise Control Node (NAC): Not Active
Passenger Door Node (NPP): Active
Driver Seat Node (NAG): Not Active
Assistive Braking Node (NBA): Not Active
Passive Entry: Active
Steering Lock Node (NBS): Active
Gear Shift Node (NSC): Not Active
Passenger Seat Node (NAP): Not Active
Parking Sensor Node (NSP): Not Active
Engine Signals Node (NSM): Not Active
Airbag Node (NAB): Active
Air Suspension Node (NMA): Not Active
Roll/Incline Control Node (NPS): Not Active
Adaptive Headlights Node (NFA): Not Active
Drivetrain Control Node (HALF): Not Active

Logs from PROXI procedure.
Reading CAN configuration data ...
CAN CONFIGURATION DATA:
04 32 97 FB 04 32 97 FB 00 30 00 41 00 00 00 00 00 00 00 00
04 32 97 FB 00 22 05 89 04 32 97 FB 00 22 05 89 00 22 05 09
32 31 31 34 30 30 30 36 35 30 32 4F 55 54 50 55 54 2D 4A 49 54 20 06 07 28 FB 97 32 04 89 05 22 00 C3 60 00 07 B7 00 34 10 00 00 94 06 01 00 01 06 08 00 00 22 50 57 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 42 40 B2 88 00
Body Computer (NBC)
Engine Control Unit (NCM)
Instrument Cluster (NQS)
Steering Wheel Switch Node (NVO)
Radio / Navigation with Maps Node (NRR/RMN)
Braking System Node (NFR)
Info-Telematics / MS Convergence Node (NIT/NCV)
Driver Door Node (NPG)
Trunk Node (NVB)
Air Conditioning Node (NCL)
Steering Angle Sensor Node (NAS) C-CAN
Lateral Tilt / Side Acceleration Node (NYL)
Passenger Door Node (NPP)
Wezel Teg Reader (NPS)
Steering Lock Node (NBS)
Airbags Node (NAB)
2017-01-20 14:34:13
CONNECTED TO:
Alfa Romeo 159 1.9 JTDm 8V
CAN Setup / PROXI Alignment Procedure
--------------------------------------------------------------

Body Computer (NBC): End Of Line Ok
Engine Control Unit (NCM): Ok
Instrument Cluster (NQS): End Of Line Ok
Steering Wheel Switch Node (NVO): Ok
Radio / Navigation with Maps Node (NRR/RMN): Ok
Braking System Node (NFR): Ok
Info-Telematics / MS Convergence Node (NIT/NCV): End Of Line Failed
Driver Door Node (NPG): End Of Line Ok
Trunk Node (NVB): Ok
Air Conditioning Node (NCL): End Of Line Ok
Steering Angle Sensor Node (NAS) C-CAN: Ok
Lateral Tilt / Side Acceleration Node (NYL): Ok
Passenger Door Node (NPP): End Of Line Ok
Wezel Teg Reader (NPS): Ok
Steering Lock Node (NBS): End Of Line Ok
Airbags Node (NAB): Ok

ACTIVATING ADJUSTMENTS...
PROXI ALIGNMENT PROCEDURE
Writing CAN configuration data ...
Writing to module: Body Computer (NBC) SUCCESS!
Writing to module: Instrument Cluster (NQS) SUCCESS!
0
0
Writing to module: Info-Telematics / MS Convergence (NIT/NCV) FAILED! - Time out
Writing to module: Driver Door Node (NPG) SUCCESS!
Writing to module: Air Conditioning Node (NCL) SUCCESS!
Writing to module: Passenger Door Node (NPP) SUCCESS!
Writing to module: Steering Lock Node (NBS) SUCCESS!
Writing to module: Airbags Node (NAB) SUCCESS!

EXECUTION FAILED
Info-Telematics / MS Convergence (NIT/NCV) FAILED! - Time out

Gentlemen, do you have any idea what to do??
thanks in advance for the help :)
 
Amortyzatory
Back
Top