• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Operational tips

I did it after 7 thousand km. Everything was under warranty at the dealership (ASO) because the oil was diluted with fuel. If you want to do a preventive change after the break-in, change it after 10 thousand km
 
That means about 0.7 L of oil had entered and you could smell gasoline in it, and the cause was a stuck fuel injector unit (fuel metering was incorrect) - after loading new software and resetting everything is ok.
 
I also think 10 thousand is a bit too much...
When taking the car from the showroom, I was advised to do the first oil change after 10 thousand km, and the following according to the manual. I think that's reasonable.
 
How is it with this oil? I was told they would change it after 30 thousand at the first service. I have over 13 thousand now, I don't know what to do. Someone wrote that the ASO changed it under warranty, is that possible?
 
I don’t know yet how it is in the AR, but for example in Mitsubishi oil changes on your own expense :)
 
Oil is always changed at my own expense - the A.S.O. sponsored the change because, due to their fault, the oil degraded earlier. The first oil change for a car from the showroom is better done at 10,000 km, after the so-called break-in. I do not recommend following the 30,000 km interval for oil changes in normal usage - 15,000 km will be the optimum due to the longevity of the turbo bearings.
 
Oil is always changed at my own expense - the A.S.O. sponsored the change because, due to their fault, the oil degraded earlier. The first oil change for a car from the showroom is better done at 10,000 km, after the so-called break-in. I do not recommend sticking to a 30,000 km interval for oil changes in normal usage - 15,000 km will be the optimum due to the longevity of the turbine bearings.

Exactly, not even asking about the cost, just after how many km; they at the A.S.O. still claim after 30k. I'm approaching 15k, should I change it??????
 
Of course! I changed mine after 8k - they also recommended this at the A.S.O.; maybe because in winter I was breaking it in... but still worth it! I won't even wait until 30k; the second change will be soon, so maybe after 15-20k I’ll change now! Cheers
 
Today I mounted the roof rails. Even though they are dedicated accessories, so in theory they should fit perfectly, I wracked my brains and sweated a bit - although the illustrated instruction is included... The result is very nice, the rails are mounted really securely, far better than in AR156
 
I also have the dedicated roof rack installed. The pictorial instruction is lousy; it doesn’t show the numbers of the individual parts (each page on the left, right, front and back is unique). Only after the bill of materials can you make sense of it. The rear crossbar goes in harder - it has less clearance along the length. I confirm, the luggage rack sits firmly. The mounting feet are on screws into the roof holes.
 
To install the rear crossbar you have to loosen the tightening "string" - then it fits perfectly, but this wasn’t stated in the instructions...
 
O... I didn’t think of using the string. How do you tighten it once the luggage rack is installed?
The rack without the boxed box on really "sings". I suspect these strings are to blame.
 
O... I didn’t think of using the string. How do you tighten it after mounting the rack?
The luggage rack with no box mounted really "sings". I suspect these strings are to blame.
This is probably not the string’s fault, but aerodynamic resistance. In the previous model I had something similar above 80 km/h, it whistled various melodies after mounting the rails regardless of whether there was luggage or not.
 
I was also whistling around 100 km/h, experimented and it doesn’t whistle anymore... It stops whistling depending on the tension of that very string. Its tension is adjusted with the screw holding the metal socket of the lock
 
Amortyzatory
Back
Top