• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Headlight sprayers

the instruction supposedly states 4.6 L capacity for the windshield washer reservoir. The rubber seal is equal to 5 L. When I have a level with the seal you can't see anything leaking, the washers are working. However when pouring into the neck (funnel) the liquid will spill out here as marked in red on the pump for the xenon lamps

whereas if the liquid goes down the tube and is level with the seal you can't see a leak..
 

Attachments

  • edf.jpg
    edf.jpg
    38.1 KB · Views: 30
If you pour into the place marked in red and it’s fine, and when pouring a larger amount it spits out, I suggest pouring the fluid only into the place marked in red - problem solved
 
The signal comes from the ECU. I rewired it using a two-time relay where you can adjust the delay after how many seconds from spraying the front windscreen it sprays the lights, and the second time is set for how long they will spray. It’s a modification but now it sprinkles like in my old AR 147 where longer sprayes of the windscreen activated the lamp washer. https://allegro.pl/oferta/przekaznik-dwu-czasowy-zwloczno-skracajacy-5ts5-6436895482

I'll refresh the topic - I have such a relay but T02 in julia according to the description is a slim relay and not square like the one in this auction - did you do any bypass of the socket, or did you move the pins to the empty place for a bigger relay ?? or maybe T02 is not the right relay ??
 
Last edited:
I'll refresh the topic - I have such a relay but T02 in julia according to the description is a slim relay and not square like the one in this auction - did you do any bypass of the socket, or did you move the pins to the empty space for a bigger relay ?? or maybe T02 is not the right relay ??

the T02 relay stays in its place, only best to cut off the pins at the relay from the contacts so that only the coil is connected, you can also pull it out completely but then the washer relay will show an error in the body because the body won’t see the coil resistance. The additional two-time relay needs to be placed somewhere nearby and its contacts connected in parallel to the contacts of the T02 relay.
 
Amortyzatory
Back
Top