• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Joined
Jan 29, 2022
Messages
12
Car
Stelvio 2018 280KM
After the pads were replaced, the mechanic’s computer is spewing errors like crazy. Here’s a link to a video (you need to click on the thumbnail below) -> https://www.icloud.com/photos/#/icloudlinks/0aaFaoTmWdfrsOwHwuBtRfoNA/

Have you encountered something similar? Is it a matter of resetting these errors at the dealership?

I connected the car to Multiecuscan, but they can’t be cleared (the manufacturer explains that the errors can be cleared only after eliminating the fault – while there was no fault here).
I don’t really know what to do about it, the mechanic says he only replaced the pads.
 
With all due respect, when I read some threads I’m horrified. How can you start working on brakes without knowing the construction of the system? After all, not a small car or a big Fiat – technology has advanced a bit. You simply look for someone with WItech and they’ll come to you on-site, or a tow truck and an authorized service center – MES won’t clear these errors.
You pushed the pistons back, you didn’t disconnect the battery, you didn’t pressurize the system by turning the ignition on – you turned the ignition on and only then pumped the pedal, and because of that the system thinks there’s a leak in the braking system.
 
For you that’s obvious, just as it is for me, that if I go to a mechanic, he knows what to do and won’t return the car with a Christmas tree on the dashboard.
 
I wouldn’t have given him the car back, and I certainly wouldn’t risk driving with those errors – that’s suicide. He caused a mess, let him clean it up.
 
Last edited:
With MES of a version above, it should work to alfa OBD needs some calibration first and then clear the errors. I don’t remember exactly, I had it when replacing brake fluid but I handled it myself by trial and error. And with the pads, as the guys wrote above – it’s the mechanic’s incompetence.
 
Amortyzatory
Back
Top