• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Conversion to QV

Montezuma

New
Joined
Oct 10, 2022
Messages
5
Location
Wrocław
Car
Giulia, będzie Giulia QV
Hello

My first post here, so to start I’d like to say hello.

I own a Giulietta Business, which I bought opportunistically from a person moving abroad, so it would be a shame not to take it. But because I’m not completely satisfied with its looks, I plan to upgrade it to Giulietta QV. I’ve got most things sorted (spoiler, diffuser, rims, calipers), the hardest part will be the hood, but I’ll leave that for last.
Now the question is how to make those side air intakes? My buddy said he could cut it out for me with a metal jigsaw, but I’m a bit worried whether he’ll do it properly and then it won’t rust, for example. Are there workshops that can do something like this? Can you find a template to follow for cutting?
That’s all for now, once I sort this out I’ll probably ask about the hood.

Thanks.
 
Go for it, buy new dedicated fenders.
And if the buddy suggested engine upgrade to the one from the QV, would he cut it with a jigsaw and weld the missing piece of the engine block too?
 
Last edited:
Sorry but you started with 'on the surface Ferrero and inside zero' minus the context, I’ll bite.
 
From the Business version to QV, the interior remains largely the same, including gauges (larger central display) and the bigger radio.
What you want to do, i.e. the QV look, will be fine without those ventilations in the fenders. Especially since the cloverleaf badges on the fenders are in dedicated embossings.
 
This is just one option and I’m not convinced about it as I wrote. So I’m asking if anyone has done it and can give advice?
I care about the intakes specifically because they look very raspy and sporty.
 
My brother-in-law said he could cut it out with a metal jigsaw, but I’m a bit afraid whether he’ll do it professionally and then it won’t rust, for example. Are there workshops that could do something like this for me? Can I find a template somewhere to cut by?
Thanks.

Not with a jigsaw because you’ll damage the edges; let your brother-in-law use an angle grinder but with adjustable RPM and cut at low speeds so as not to overheat the material.
Template – nothing simpler – buy an A3 sheet (or a large wall calendar, might have a naked girl on it – but draw on the white side, not on the boobs) and go to a showroom where the QV version stands, lay the sheet and outline the shape with a pencil, then transfer the outlined shape onto the modified fender and mark the cut line (you don’t need to dismantle the fender before cutting but don’t cut too deep).
After cutting the holes in the fenders, you’ll need to shape the profile from the door-edge side a bit, but your brother-in-law can handle that. Also I don’t see the point in overpaying for an original ;)

And pull yourself together, it’s embarrassing to ask such basic things on a forum ;)
 
These fenders are expensive, besides I don’t have money for painting. I blew my budget on the spoiler and diffuser.
I’ll go back to the brother-in-law; maybe the grinder is a better idea after all. The brother-in-law can do it, since he works in metal.
Regarding the template, I’ll buy this grille and return it, because it has free returns.
allegro.pl/oferta/kratka-blotnika-lewa-alfa-romeo-giulia-qv-10569548498
 
Is there a moderator here, or will we keep feeding the troll? Bait 2/10 for obvious reasons
 
Amortyzatory
Back
Top