• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

[Giulia] Chiptuning

What do you mean?
Squadra tuning on their sites boast that they can flash ECU and TCU via the OBD connector. In Poland probably no one does it that way, and it enables faster tuning because you don’t have to remove the computer from under the hood and splice wires and you don’t waste a whole day on it.

Another thing, not many people seem to be able to tune this ECU.
 
Squadra tuning on their sites boast that they can flash ECU and TCU via the OBD connector. In Poland probably no one does it that way, and it enables faster tuning because you don’t have to remove the computer from under the hood and splice wires and you don’t waste a whole day on it.

Another thing, not many people seem to be able to tune this ECU.
And rightly so they boast, because it works perfectly. Tested.
 
And rightly so they boast, because it works perfectly. Tested.
Give more details. What does the procedure look like, how is the tuning itself and user experience. Was it done remotely? There was somewhere described that you need a good internet connection, good battery power maintenance, and a long straight with a closed road if you want to tune for your ECU.
 
Write a bit more. What does the procedure look like, how is the tuning itself and driving impressions. Was it flashed remotely? There was some description that you need a good internet connection, a stable power supply from the battery, and a long straight road with closed traffic if you want to tune for yourself the ECU.
Hi,

If we are talking about flashing the ECU (PCM) and the TCU (TCM) with software by Squadra through the OBDII port using the PWG4 OBD tool, it is relatively straightforward.
PWG4 is bought directly from Squadra when entering into the agreement and purchasing the tuning.

An alternative to PWG4 is buying or renting a remote flasher, but I don’t know the exact procedure, because I didn’t do it myself, so the following opinion concerns flashing directly with PWG4.

Besides PWG4, you need to have:
- an installed SGW bypass
- a phone to control PWG4 via an app
- a Wi-Fi connection (e.g., via phone hotspot).

It is strongly recommended to keep the car battery charger connected at all stages to avoid voltage drops and ECU damage.

PCM writing takes about 30 minutes. TCM takes about 10 minutes.

PWG4 must be ordered directly from Squadra and will stay with you in case you want to flash original files, rewrite the flash, etc.
Remember that PWG4 will be “locked” to your car and you cannot use it to flash other cars (in fact it can be unlocked, but as far as I remember, it must be done by Alientech or Squadra, and the fee is xxx €)...

Instructions for flashing with PWG4 can be found on the Squadra site.
- mandatory Wi-Fi connection (e.g., via phone) while PWG4 is connected to the OBDII port (virtual identification, read, write, etc.)
- after creating the virtual ID, send an email to Squadra, and they will send the data to the cloud-tuned software (usually within a day and they will inform you of completion). - return to the car (reconnect SGW and the battery charger)
- follow PWG4 app instructions on the phone (turn off air conditioning and other auxiliary devices in the car)
- the car will report many errors during the process, but after flashing they will be cleared.
- At the end of the PWG4 write process, it asks for three engine speed limit exceedances up to 6500 rpm. During my flashing this step wasn’t done properly, but to fix it you can do it after tuning.

After flashing PCM the warning lights “Start & Stop Unavailable” and “Check Engine” may still be on. To fix this, heat the car up, put the gear in P, and three times exceed the engine speed to 6000 rpm (a light overspeed to 6000 rpm for 3 to 6 seconds).

Flashing is performed remotely, using files from the cloud. Just wait for Squadra to send the files to the cloud after creating the virtual ID (described above). Of course Squadra (Stephen) is very responsive and will quickly provide support if you have questions or doubts.

My notes regarding PCM and TCU tuning can be read on the Squadra site (Tom; https://squadra-tuning.com/chiptuning/alfa-romeo/giulia-alfa-romeo/2-0-turbo-veloce-280-pk/).

P.S. This message is automatically translated from English to Polish using an online translator. Sorry for the errors.
 
in our cars there is normally a rev limiter at idle up to 4k, if the tuning version didn’t change it (it can be done but I’m not sure they changed it that much or didn’t touch it at all) you can’t do that at idle. e.g., the tuner when he made a correction for me before getting home, we were on the road - it’s about calibrating the “phonic wheel” sensor.

I know that in the descriptions from Alen/Squadra in the past people also couldn’t pass something and it was true that the description spoke of such a run while in reality it should have been different - I mean the difference between P and N, but I don’t remember. These are small scraps of information I received from clients who bought a bypass from me and couldn’t go through programming and of course probably this bypass of mine (from me directly or as part of a kit offered by some tuner supplier) causes a problem because Alien/Squadra/Eurocompulsion tell them the procedure is correct and they have no idea.
 
They write on the site that they moved the rev limit to 6500.
rev limit during driving/segment, or idle limit? because these are two different things. with the limiter and damped response at idle the manufacturer did it that way on purpose because tests, e.g., on the road or SKP in some countries measure emissions at idle when the gas is pressed - they should probably do it at 60% of the segments, but it’s not so easy either and the engines probably barely met the norm with the inflated, so they damped it and limited it software-wise because people could have trouble passing inspection.
 
in our cars there is normally a rev limiter at idle up to 4k, if the tuning version didn’t change it (it can be done but I’m not sure they changed it that much or didn’t touch it at all) you can’t do that at idle. e.g., the tuner when he made a correction for me before getting home, we were on the road - it’s about calibrating the “phonic wheel” sensor.

I know that in the descriptions from Alen/Squadra in the past people also couldn’t pass something and it was true that the description spoke of such a run while in reality it should have been different - I mean the difference between P and N, but I don’t remember. These are small scraps of information I received from clients who bought a bypass from me and couldn’t go through programming and of course probably this bypass of mine (from me directly or as part of a kit offered by some tuner supplier) causes a problem because Alien/Squadra/Eurocompulsion tell them the procedure is correct and they have no idea.
Hi,

After tuning PCM with PWG4 it’s required to increase revs to 6000+ rpm (I don’t have direct experience with other methods).
This part of the PWG4 procedure doesn’t handle it well, however it can be performed separately without a connected PWG4.
From what I understand, this is related to re-tuning the phonetic wheel and/or PCM, and to perform re-tuning, three times engine speed exceedance is required. It is important that the engine is warmed up, because otherwise the procedure may fail and will need to be repeated (this concerns the rev speed crossing part).

I had a similar experience during tuning, and Stephan from Squadra indicated the required steps to remove the error.

Apparently (I didn’t confirm it myself, but I read it online), when the phonetic wheel adaptation is required, the revs are not limited.

P.S. This message is automatically translated from English to Polish using an online translator. Sorry for the errors.
 
It’s starting to become clear to me how this works. So the key to performing the modification is to purchase PowerGate https://www.alientech-tools.com/powergate/ Having this device you can read the ECU and TCU configurations and put them in the cloud. In the same way you can download modified software and flash it to your car.

Squadra only provides modified software that contains what we request - increased power, removed rev limiter, disabled start-stop.

Is it possible, using PowerGate, to flash some ready-made software or software from another car?
 
I'm starting to understand how this works. The key to performing the modification is to purchase PowerGate https://www.alientech-tools.com/powergate/. With this device you can read the ECU and TCU configuration and upload it to the cloud. You can also download the modified software and upload it to your car.

Squadra only provides modified software that includes what we want - increased power, removed rev limiter, disabled start-stop.

Is it possible to upload a ready-made program or software from another car using PowerGate?
Hi,
You have to buy PWG4 from Squadra if you want to tune remotely via OBD using Squadra.
PWG4 is the “remote interface” that allows access to the tuner’s cloud computing with the ability to read/write software to the PCM and TCM. In this case it will be pre-configured to work only with Squadra.
If you buy PWG4 from Squadra, Squadra controls the cloud, and you can tune only the files that Squadra sends to the cloud. You cannot upload your own files. The main control over the cloud belongs to the tuner from whom you bought the PWG4.
You can email Squadra with any questions, and Stephen will answer them. He is very responsive.

Similarly, if you want software from other tuners (e.g. Club Alfa / PW Performance or others), you must buy PWG4 from them, because PWG4 purchased through Squadra will not work, as it will not have access to another tuner’s cloud.

There are probably ways to “wipe” PWG4 so you can use it with other cars and tuners, but that may require intervention by Alientech and it’s best to consult with them directly.

As mentioned earlier, there is also an option to purchase/rent an OBDII remote flasher (https://alfatuning.app/device), however I haven’t used it myself, so I can’t give a concrete opinion. You can also write them an email with specific questions.

I hope this helps a bit 😊.

P.S. This message is automatically translated from English to Polish using an online translator. Sorry for any mistakes.
 
You have to buy PWG4 from Squadra if you want to tune remotely via OBD using Squadra.
Thanks for the thorough answers. In Poland I don’t think many people modify Giulia this way. Most shops plug directly into the ECU and TCU, and don’t do it via OBD. I’ve seen many positive opinions about modifications done by Squadra - I’m curious how the car’s measurements look on a dyno and whether Squadra offers something unique in its modified software that others don’t offer.

Certainly a plus is that you can flash the car with the old original software by yourself, or ask for a new one to flash yourself.
 
Thanks for the thorough answers. In Poland I don’t think many people modify Giulie this way. Most workshops plug directly into the ECU and TCU, and don’t do it via OBD. I’ve seen many positive opinions about modifications performed by Squadra - I’m curious how the car’s measurements look on the dynamometer and whether Squadra offers something unique in its modified software that others don’t offer.

A definite plus is that you can flash the car with the old original software yourself, or request a new one to flash yourself.
You should keep in mind that stage 3 means a custom compressor, larger compression wheel + turbine. The turbo’s characteristics are described by mathematical models in the ECU, and from that the flows are calculated. A custom turbo also carries a significant risk; it may happen that due to over-sizing, the curve shifts to the right, and the car won’t be suitable for daily use. The ideal situation is when the tuner has previously worked with the turbopressor from a given supplier; otherwise there will be a long correction session.
 
The ideal situation is when the tuner has previously worked with the turbine from a given supplier; otherwise there will be a long correction session.
Thanks for the reply. I’m still curious about tuning this ECU. Does every tuner modify something, or do they just flash a ready-made map and in case of problems assign fixes to someone else who knows what they’re doing? If for every programming you remove the ECU, then there will be an enormous amount of work with tweaks, so I think everyone in Poland is driving with ready-made maps, even if they’re not the most optimal. Is that true, or a myth?
 
Thanks for the reply. I’m still curious about tuning this ECU. Does every tuner modify something, or do they just flash a ready-made map and in case of problems assign fixes to someone else who knows what they’re doing? If for every programming you remove the ECU, then there will be a lot of tweaking work, so I think everyone in Poland drives with ready-made maps, even if they aren’t the most optimal. Is that true or a myth?
As you noted yourself, not many people understand how Multiair works. Remote tuning is standard in this industry.
 
As you noted yourself, not many people understand how Multiair works. Remote tuning is standard in this industry.
On the other hand, without a dynamometer, as with Squadra’s software, it’s also hard to assess after flashing whether everything is OK. It would be nice to have an option for quick uploading of improved software via OBD and an on-site dyno.
 
On the other hand, without a dyno, as with Squadra’s software, it’s also hard to assess after flashing whether everything is OK. It would be handy to have an option for quick uploading of improved software via OBD and a dyno on site.
You have two options.
1. You commission the E2E process to a tuning company that has a dyno. This company handles logistics (remote-tuning). Flashing, dyno, logging, remote tweaks, communication with the tuner, etc...
2. You handle the logistics yourself. It’s possible, but you need to know a bit about diagnostics :)

In addition you must add the logistics related to buying and installing turbo/downpipe, and other gadgets.
An ideal situation is a garage that does the E2E topic, hardware + software.
 
Last edited:
On the other hand, without a dyno, as with Squadra’s software, it’s also hard to assess after flashing whether everything is OK. It would be nice to have an option for quick uploading of improved software via OBD and a dyno on site.
Squadra does road tests and claims they are much more representative and reliable than a dyno.
 
Squadra does road tests and claims they are much more representative and reliable than a dyno.
What interests me more than increasing power is getting rid of the eco-friendly limiters, so that the car wants to go as soon as you press the accelerator, and not after the CO2 emission is calculated. You can’t test that on a dyno, but it could show some gaps or errors in the configuration under heavy load.
 
Amortyzatory
Back
Top