Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.
Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.
Nie czekaj, bo jak zwykle schodzą szybko.
With ECUs it's hard, even though they are made in Poland; you can clone a second one in the ASO without a problem, but it has a mileage logged in it and won't match the mileage from other controllers, and if you want to add it without the ASO you also have to open both to transfer the immobox![]()
And thus it will raise the logged mileage, so one dog or you install a second ECU or do it via OBDAnd I think the dragon will manage the mileage.
What doesn’t change? In the ECU you have the odometer, in the ABS too, in the AIRBAG etc. If you change the ECU the odometer will run, but in the one you pulled out it won't, so it will be different from the odometer and from the other modulesI swapped ECUs in a VAG and the mileage didn't change, I don't know about Alfa...
Hmm, how do these numbers compare to those provided by Alfa.my and the chart looks like in the attachmentView attachment 248976
Alfa it was braked without dyno mode on rollers with synchronization, the torque came out a bit higher because the electromechanical brake was set that wayHmm, how do these numbers compare to those provided by Alfa.
In the catalog, 400 is at 2250 rpm.
Is there some scaling entered into the measurement?
Sent from my EVA-L09 using Tapatalka
And thus the counter will be programmed higher, so one guy or you install a second ECU or do it via OBD
Sent from my SM-G950F using Tapatalka
Does anyone know which forum member has a box in a 2.0t 200hp?
