• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Chiptuning.

Guys, I have too much data to recommend tuning as the only solution to someone who doesn’t want to tinker with tuning.
Tjety dismantled EVERY more recognizable tuner in Poland, I wrote to many, they dismantled so ultimately my ecu too.
Piotriix I know well how the box works, files downloaded from MM’s site are flashed into the box, not into the ECU, they modify (deceive) the signal from the sensor... I drove with the box, read a lot on this topic, didn’t want to ruin the car... but a well-known tuner ruined it :-P.

The truth is, you won’t find anything more than a paint plot, no matter what box manufacturer it is.

I think everyone interested in the topic will read and ask questions before making decisions.

Sent from my SM-G975F using Tapatalka
 
Boxes allow you to set the "strength" with which the signals exiting from them are modified.
Moreover, boxes also have "base" settings, which indeed are subject to adaptation.
This functionality can be controlled by an external app, e.g. on a phone, and it is also "recorded" in the device.
In simple terms, this is a correct description, and colleague 68oct has a lot of truth here.
 
Tjety dismantled EVERY more recognizable tuner in Poland, I wrote to many, they dismantled so ultimately my ecu as well.

Yes, you’re tangled in statements just to suit your agenda :) So the first one that comes to mind is Alientech, reads either VR or Service mode.
kess.png
ktag.png
 
Boxes allow you to set the "strength" with which the signals modified by them are output.
Moreover, boxes also have "base" settings, which indeed are subject to adaptation.
This functionality can be controlled by an external application, e.g. on a phone, and it is also "recorded" in the device. In simple terms, this is a correct description, and colleague 68oct has a lot of truth here.

Whatever you call it, it is signal falsification. As long as the signal is to be falsified it is "recorded in the device" but not in the ECU, only in that box. So like in the cheapest ones, except it’s recorded by a potentiometer :) Here there is a "feature", because you can do this with a phone via BT :) No matter how you do it, no matter what you call it, it’s the same.

To illustrate simply with a diesel and one of the signals, e.g., boost - The maximum boost in the software that the ECU demands is 2400 mbar. The boost limiter factory setting is 2500 mbar. The box deceives by 200 mbar. So the ECU sees 2400-200=2100 mbar. So it adjusts the throttle to press the 2400. It raises by 200, so in reality you have 2600 mbar. 2600 mbar is the limit of GT1749v. But for the ECU it is still 2400. No overboost error P0238 despite the turbo barely working. You won’t even see this on a diagnostic tool, so you can’t log it. Do you understand? You don’t know with what “strength” signals are modified even when you log data. The ECU doesn’t know either.
One more thing - for such a diesel (EDC16C39) for the mod to have hands and feet you need modification of about 40 maps. You have in the box only 3-5 cables.

- - - Updated - - -

@sdero
He still doesn’t get it and thinks that box is flashing something into his car[emoji16]

Marketing did its job ;)
 
Whatever you call it, it is signal falsification. As long as the signal is to be falsified it is "recorded in the device" but not in the ECU, only in that box. So like in the cheapest ones, except it’s recorded by a potentiometer :) Here there is a "feature", because you can do this with a phone via BT :) No matter how you do it, no matter what you call it, it’s the same.

To illustrate simply with a diesel and one of the signals, e.g., boost - The maximum boost in the software that the ECU demands is 2400 mbar. The boost limiter factory setting is 2500 mbar. The box deceives by 200 mbar. So the ECU sees 2400-200=2100 mbar. So it adjusts the throttle to press the 2400. It raises by 200, so in reality you have 2600 mbar. 2600 mbar is the limit of GT1749v. But for the ECU it is still 2400. No overboost error P0238 despite the turbo barely working. You won’t even see this on a diagnostic device, so you can’t log it. Do you understand? You don’t know with what "strength" signals are modified even when you log data. The ECU doesn’t know either.
Another note - for such a diesel (EDC16C39) to have a credible mod you need modification of about 40 maps. You only have in the box 3-5 cables.

- - - Updated - - -



Marketing did its job ;)

I never claimed it was otherwise.
I set the "Focus" to "load settings", i.e., what started this discussion.
Fact is, you can also do it in a box.
Whether the tuner modifies 20 or perhaps 40 maps is probably a matter of ambition and broadly understood tuner individuality.
Both approaches can yield the same final effect, and the dyno results can be the same too.

BTW, I hope you’re not trying to convince me that modifying ECU/ECM memory contents is a better solution than a box ;)
 
Last edited:
Whether the 'tuner' will modify 20 or 40 maps is probably a matter of expressiveness and the tuner’s broad concept of personalization :). In both cases the end result can be the same, and the dyno traces as well.

A question of imagination?! Personalization?! It’s clear you have no idea what we’re talking about. Personalization and imagination you can apply to painting, poetry.

Indeed the traces can be the same, but what happens in the engine is a different story.

BTW, I hope you’re not trying to tell me that modifying the ECU/ECM memory contents is a better solution than a box ;)

I’m not even trying. There’s nothing to prove here; it’s just how it is.

A fruitless discussion.
 
Hi
I’ve just finished tuning/adjusting my Giulietta 1.4 TB 120hp. I did it at MOTOM near Łódź. This is my first car handed for tuning; I wasn’t after dyno charts (I don’t get excited about charts). I came across tuning on the recommendation of the gas installer, who said it’s an ideal engine to gain power at a small cost. I told the person doing the tuning that I mainly want the engine to be safe and that the car should pick up faster at low RPMs. I was supposed to pick up the car the next day, but there were issues with a “hole” when increasing power; the whole turbo was diagnosed, and it turned out the DV valve was faulty (wear, factory weak). The inventive guy turned it around (not sure how) and tuned a new map.
I picked up the car after two days and … MEGA, SUPER different car as if it had a completely different engine. It pulls like a race car, high revs pull like crazy, at 5,6 you can overtakes briskly. Really recommend. I don’t know how many horsepower, don’t know torque, don’t know what the plots look like, I don’t care. The car simply got a stronger engine and surely it’s not placebo.
The tuner did not flash a ready-made map; he made it himself, he professionally deals with sports cars. He said that probably after a while that inverted DV valve will fail, then I should buy a mechanical universal DV valve and it will work great forever. If I knew this earlier I would have bought it before tuning. For tuning you should go on 98 petrol and the tuner advised driving on such fuel, especially when there is gas, which has over 100 octane. As a curiosity he told me that this engine with a few changes like turbo, injectors and something else can reach even 300 HP :) (and probably one donkey in the car :) In short, if you want a new stronger engine in your Giulietta I recommend tuning with a good specialist, it really works. Regards
 
Last edited by a moderator:
Sorry for my negative attitude to this statement, but you’re telling me to get chiptuning done and you’re not interested in the results? Another fairly contradictory thing is the fact of driving on more expensive petrol while looking for economy by installing gas... but I’m picking on it :)
 
Yesterday I made a big post about my experience with tuning. Colleague EduarDOOX8 even replied. And my post disappeared. INTERESTING. Please explain

- - - Updated - - -

referring to EduarDOOX8’s statement - I want to point out that for me the result is on the accelerator pedal and not on the chart, I want to feel the changes not the chart, I’m getting on in years :)
The one who runs on gas knows that petrol is used only to warm up the engine and only a little is burned, at that amount it doesn’t matter financially whether I pour 95 or 98. The tuner said it’s better to fill 98 and I’ll do that, he also mentioned something about the petrol aging when I don’t drive much on it and that’s why 98 will relatively slowly lose octane.
 
He could also have set an earlier throttle response instead of generating additional horsepower which gives a feeling of more power, something like the difference between Drive and Neutral in the DNA system. The post might have disappeared because you’re advertising to someone; if it was deleted you’ll have it in notifications
 
Only the difference between Drive and Neutral is not only in throttle response; there’s a different map and some +30 Nm :)
 
Indeed, that’s interesting; I thought everyone in automotive adds something. Thanks for expanding the knowledge :)
 
I was disappointed reading it... but on the other hand the engine often has more than it claims on paper :D I’ll just add that my friend has a T-jet, only a post disappeared.
 
The difference between the D and N modes isn’t only in response to the throttle, there is a different map and some +30Nm :)
How can we be sure there is a different map? Has anyone seen it, meaning extracted, flashed, etc.? Horsepower and Nm can be added on the same principle as with boxes (e.g., RaceChip) and you don’t need a different map for that. I ask out of curiosity whether there is absolute certainty that there are separate maps for N and D
 
different limiters for sure, a map isn’t necessarily
 
Amortyzatory
Back
Top