• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

BACCable - open-source modifications

jo_gurt

Member
Joined
Jan 15, 2024
Messages
315
Location
Lublin
Car
Giulia 2.0T MY23, Volvo V60 T6 PHEV MY24
Hi
I came across something like this by accident
Has anyone dabbed with it? I’m wondering about safety or consequences if something goes wrong.

As a curiosity, it supposedly disables S/S, can start HAS without buttons, adds burnout/launch control (completely unlocks and disables babysitters).

Has anyone played with it? I’m wondering about safety or consequences, if something goes wrong.

As a curiosity, it supposedly disables S/ S, can start HAS without buttons, adds burnout/launch control (completely unlocks and disables babysitters). Q4 and it disables the babysitters).
 
I’ve been using this for almost a year, I have a piece of involvement in the software development. Lately I’ve drifted a bit from the original by introducing some software modifications "for myself".
It does everything you wrote plus many other things like online parameter monitoring on the display behind the steering wheel, mirror control, side window controls. Also ACC+ without buttons, ESC/TCS disabling. Not so much disconnects Q4 as it disables the front-wheel drive on demand (in total, necessary for burnout/launch control).
You can also make a car tree - a million RGB LEDs in the cabin and color changes depending on gears and RPM.
The last mod is a gas controller - various maps with manual or automatic selection depending on DNA modes (especially interesting use when Race is unlocked).
If you’re interested, ask away, I know the software almost by heart, though I’ve been into gimmicks in the burnout style somewhat.
 
So basically the question: is it stable (but I understand it enough)?
Can it damage hardware? Like breaking the transfer case.
 
Since it’s OpenSource, if you don’t flash the beta version with the latest additions it’s stable, when something new is rolled out there are bugs to fix. In general updates are released fairly often and you do them via USB.
Regarding the transfer case - I doubt it. Probably a matter of overuse. The burnout or launch, which you seem to crave, work so that you disengage the front axle and the module engages the front brakes. You press the gas and burn the rear tires. You first choose in the menu the moment of exceeding the torque value at which the module releases the front brakes and then the vehicle gives the power to the front.
Personally, it doesn’t thrill me all that much. Fun for a short time, not for everyday normal driving. Unless someone has a nocturnal racer’s urge....
 
But it has functions listed in the documentation. Pretty cool. Why so little about it on the forum? After all, it’s a missing element of car equipment.
 
Last edited:
The possibilities are very wide and many more are planned. If someone has any idea about C++ then on this base you can highly personalize the car. And if not, the device itself adds a lot. Only some functions work better in older Alfas, mainly diagnostic ones. In newer ones some CAN frames either work differently or have been removed. I use this daily to monitor battery state, multi-air state, starting ACC and HAS, lowering mirrors in reverse, immobilizer.
If anything, price is about 200 euros without the gas pedal module. Of course a necessary bypass sgw.
 
In total, 200 euros isn’t too much. You should add to the queue things to delve into "as time allows" ;)
 
For the capabilities of this device, good price in my opinion.
And if someone is an electronics person they can build it for 20-25 euros from Chinese modules available on Ali.
 
Regarding the transfer case - I doubt it. Probably a matter of overuse. Burnout or launch which you seem to crave work so that you disable the front drive and the module pulls the front brakes. You press the gas and you burn the rear tires. Earlier you choose in the menu the moment of exceeding the Newton value at which the module releases the front brakes and then the vehicle gives the pipe to the front.
I’m curious about the technical side. I don’t fully know how the coupling of the front and rear axles is realized, but for example viscous couplings or multi-plate ones don’t tolerate locking one axle for longer than a few seconds, because the oil thickens and heats up, and one set of plates offers active resistance.
 
This car spends 95% of the time rear-wheel drive.
You’re probably talking about a constant-on lock, and we’re doing "no lock-on" which occurs only occasionally. In burnout/launch the goal is to have it not present at all.
 
This car spends 95% of the time in rear-wheel drive.
You’re probably talking about the “always engaged” lock, and we’re doing the “no engagement” which still occurs only occasionally. In a burnout/launch, the goal is to have it not engage at all.
95% rear-wheel drive, but the wheels spin and that is the fundamental difference. The clutch is “unengaged,” but the shaft speeds are similar.
 
Sorry I don’t understand, probably I’m not familiar... I don’t get what would burn out due to front not engaging.
 
What I mean is that when the clutch is released and one axle is locked, something like this happens here:
So one component spins violently, and the other stays still, heating the oil. If it’s oil whose viscosity increases with temperature (and such oils are often used in AWD systems’ engaged drives, because it basically works automatically - differential speed -> temperature rise -> viscosity increases -> axles lock). But in Q4 it doesn’t have to be that way - hence my question :)
 
We’re not blocking anything here, we’re only preventing preemptive engagement of the front. So we stay in a situation where the car behaves almost as original almost all the time. So if from the factory nothing gets engaged, why should something happen here. And is this a general factory problem of this construction - ask Alfas because I don’t wrap my head around it :-).
 
So one component spins violently, and the other stays still, heating the oil. If it’s oil whose viscosity increases with temperature (and such are often used in AWD engaged drives, because it basically works automatically - differential speed -> temperature rise -> viscosity increases -> axles lock). But in Q4 it doesn’t have to be that way - hence my question :)
In Q4 the Giulia and Stelvio the front drive is engaged electronically. That is, some sensors and a computer decide when there is a sufficient difference in shaft rotation speed to engage the clutch. The drives meet in the transfer case and in the case of a large difference even when not engaged by electronics, the clutch will still operate the oil and heat it. So it’s not a classic viscous clutch, where the oil was the factor triggering engagement. Nevertheless, probably on a dyno, where only one axle would rotate, or during prolonged locking of one axle while burning rubber, something with this oil and clutch could happen. Hard to say if it’s very dangerous. Probably disconnecting the front to occasionally have a bit of drift won’t cause a failure right away. Leaving it disengaged permanently in normal driving and normal usage should not be dangerous at all, because the car hardly uses the front drivetrain.
 
We’re not blocking anything here, we’re only preventing preemptive engagement of the front. So we stay in a situation where the car behaves almost as original almost all the time. So if from factory nothing is engaged, why should something happen here. And is this a general factory problem of this design - ask Alfas because I don’t understand :-).
Exactly, when one axle spins and the other is locked by the brake (burnout), this is the situation.

In Q4 the Giulia and Stelvio the front drive is engaged electronically. So some sensors and a computer decide when there is a sufficient difference in shaft RPM to engage the clutch. The drives meet in the transfer case and in case of a large difference even when not engaged by the electronics, the clutch will work the oil and heat it. So it isn’t a classic viscous clutch, where the oil was the triggering factor for engaging the clutch. Nevertheless, probably in a dyno, where only one axle would rotate, or during prolonged locking of one axle while burning rubber, something with this oil and clutch could happen. Hard to say if very dangerous. Probably disengaging the front to let it fly a bit sideways from time to time won’t cause an immediate failure. Leaving it permanently disengaged in normal motion and during normal operation should not be dangerous at all, because the car hardly uses the front drivetrain.
That’s what I’m getting at. :)
Also with the “almost no use of the front” thing, it’s also like that, during a faster start almost always. If you can trust the infotainment animation.
 
I’m sticking with "it shouldn’t be dangerous at all" :) .
Especially since I actually hardly use it to burn rubber...
 
In a separate thread I opened about this, there is a link to a page in Polish and there is already a Polish instruction there.
Maybe you’ll see photos there.
 
Amortyzatory
Back
Top