• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

AlfaOBD android

Kaacper

New
Joined
Jul 2, 2019
Messages
27
Car
MiTo 135KM 13r
Hi, could someone help me with using this app?
I think I have a problem right from the start because it seems to me that the app doesn’t connect to the OBD at all. It works without problems on every other diagnostic app, it reads engine parameters, but alfaOBD doesn’t want to connect. Theoretically, in the first field it shows connected after selecting Bluetooth, but when I choose the model and body computer I can’t do anything, all fields are gray. And after a while it prompts me to check if pin 1 and I think 9 are connected, and there’s a connection error.
Specifically I’m changing the oil and I’d like to perform this oil change procedure; if someone could describe how to access it, I’d be very happy ;)
I’ve tried both the demo and full versions, on two OBD modules.
Alternatively, is there any way to do this with diagnostic programs that “ordinary” mechanics have.
P.S. Apparently with this program you can turn off the beeping of unfastened seat belts, does anyone know how to do that?
Thanks for the help ;)
 
Select the dashboard
/ You need the yellow adapter /
Procedures and you have it.
 
So with an ordinary elm 327 Bluetooth without an adapter I won’t manage this? Where can I buy such an adapter?
Will anything happen if I change the oil without doing this and do the procedure on the computer a few days later?
 
Nothing will happen. The BC information is only for your reference to remind you that you need to change the oil – it has no effect on the car’s operation.
 
Nothing will happen. The BC information is only for your reference to remind you that you need to change the oil – it has no effect on the car’s operation.

but I’m talking about the MA calibration, not about clearing the inspection.
 
For the engine, if you have a suitable elm you shouldn’t have any problem connecting. You use adapters to connect to specific modules. You could have, for example, a yellow or a green one.
From what you’re saying you probably have an elm that won’t connect to the ECU via alfaobd. The fact that other tools communicate about nothing doesn’t prove anything.
 
Maybe I’m selecting something wrong, which option should I choose from the first screen, and in which tab is the oil change procedure later?
It looks like this:
 

Attachments

  • 1.jpg
    1.jpg
    22.9 KB · Views: 146
  • 2.jpg
    2.jpg
    18.7 KB · Views: 105
  • 3.jpg
    3.jpg
    18.3 KB · Views: 100
  • 4.jpg
    4.jpg
    27.9 KB · Views: 116
  • 5.jpg
    5.jpg
    17.9 KB · Views: 88
Maybe I’m selecting something wrong, which option should I choose from the first screen, and in which tab is the oil change procedure later?
It looks like this:

Try to connect to the Engine. In the further screenshots you show that you want to connect to other modules.
 
what does the same thing mean? you already have a connection problem, is that what you mean? are you using the correct adapter if AlfaOBD asks for one (for example the yellow one)? my ELM BT (that standard big one from PMFactory with an orange-blue sticker), sometimes disconnects from AlfaOBD during operation, but in general it works both in the 159/Giulietta and in Giulia, I’ve done proxy and other tasks with it more than once, though I prefer a laptop and MES on a daily basis.

I don’t have knowledge about Mito, perhaps someone who knows will advise the guy if and when the uniair calibration is done, I read something here on the forum that in newer designs (MA) you’re not even allowed to do that
 
what does the same thing mean? you already have a connection problem, is that what you mean? are you using the correct adapter if AlfaOBD asks for one (for example the yellow one)? my ELM BT (that standard big one from PMFactory with an orange-blue sticker), sometimes disconnects from AlfaOBD during operation, but in general it works both in the 159/Giulietta and in Giulia, I’ve done proxy and other tasks with it more than once, though I prefer a laptop and MES on a daily basis.

I don’t have knowledge about Mito, perhaps someone who knows will advise the guy if and when the uniair calibration is done, I read something here on the forum that in newer designs (MA) you’re not even allowed to do that

In the first window it says connected, I select the engine, and the yellow adapter, I enter but all controls are gray and you can’t perform any diagnostic action. After a moment errors about the connection appear, etc.
 
Mine is the yellow adapter that works great with the wired interface[dla MESa] it also doesn’t work[podobnie jak u Ciebie] with the wireless ELM for Alfa OBD.
 
In the first window it says connected, I select the engine, and the yellow adapter, I enter but all controls are gray and you can’t perform any diagnostic action. After a moment, connection errors, etc. appear.
maybe some settings in AlfaOBD. I remember I had some so-called ELMA, under MES it worked as an elm, but under AlfaOBD not, only as an OBDLink and then with higher speed 115200.

- - - Updated - - -

I understand that no adapters etc are needed for this?

depends on the computer, in AlfaOBD or in MES there is no support for multiplexing and cheap interfaces don’t have it either - only connection to pins 6/14 of OBD, that’s why you need adapters of the kind that the module’s program specifies
 
I bought the recommended OBD and the same thing, I must be doing something wrong, can someone explain in a simple way how it should be done step by step? Here is my recording:
https://drive.google.com/open?id=11rR34l63N8lydoA3arBAFJ0IXrjdoJYm
edit. In the recording I didn’t click the Bluetooth icon on the first screen, but clicking it and getting info that it’s connected is exactly the same.
 
Last edited:
I bought the recommended OBD and the same thing, I must be doing something wrong, can someone explain it step by step? here is my recording:
https://drive.google.com/open?id=11rR34l63N8lydoA3arBAFJ0IXrjdoJYm
edit. In the recording I didn’t click the Bluetooth icon on the first screen, but clicking it and getting info that it’s connected is exactly the same.

In the recording you can’t see that you established a connection. From what can be seen, there was an attempt 1, and you swiped the screen to the right and tried to gain access. Wait on that first screen to see if you get a connection. Additionally, will your interface connect to the engine without the yellow adapter?
 
which interface over Bluetooth, should I Android buy those icar2 or icar3 work?

Sent from my FIG-LX1 using Tapatalka
 
kaarolek1
I have an ELM from PMFactory bought years ago (that big orange-blue sticker), I even removed the resistor because I didn’t know you can remove it, so I didn’t order the appropriate one. It works on various cars with AlfaOBD or from a laptop with MES in Giulia, 159, GIuii, Stilo, 500, Bravo. I also once used some iCar (about 3) someone had on hand and I did something in prox i Giulietta quickly.

Kaacper
you recorded a video but unfortunately it’s useless, you immediately click on the side screen, you have nothing connected, what can we tell you?

You didn’t address the issue of the yellow adapter (type 3) - did you place it between the interface and the OBD? already twice you were told in the thread - in such cheap interfaces without multiplexing (AlfaOBD anyway doesn’t support) you must use an adapter.

have you tried changing settings of the interface? have you tried to connect from another device?
 
Last edited:
Amortyzatory
Back
Top