• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Adding a front camera

DonAlf

New
Joined
Feb 8, 2025
Messages
5
Car
Giulia 2.0 280
Because of numerous chips I plan to replace the windshield. Right now I have a windshield without a cutout for the front camera for automatic high beams, reading signs, etc., so I would replace it with the proper glass and add a camera. Has anyone tackled this topic and can say whether all the necessary harnesses exist, whether a used camera can be added, and whether there is no problem activating the camera in MES, because the extra options themselves are not a problem.
 
It can be done. The harnesses, as far as I recall, are not complete (someone added — they took the camera from me and I talked to him about it), plus as far as I remember there was a problem that the glass didn’t have such a heater (maybe it was aftermarket glass and they intended to transfer it?). In addition you’d have to change the stalk — I have new ones in the shop at shop.stuff4car.com as well Giulia as well as Stelvio. By the way I think I still have a pre-facelift camera from my car (I replaced it with a facelift to make it functionally a full facelift with all assistants). If you buy these two things from me I’ll look up the schematic and what needs to be changed in the prox. By the way you’ll be able to activate auto high beam
 
Automatic high beams, in short, when something comes from the opposite direction they turn off for a moment and then turn on again. And why would you need to replace the stalk?
 
For LDW (lane departure warning) the button and for auto high beam original without KDW does not work
 
Amortyzatory
Back
Top