• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Steering rack: question.

marekkoczta

Active
Joined
Nov 11, 2018
Messages
1,919
Location
BIALYSTOK
Car
alfa romeo
Looking for a steering column stelvio maybe from a Giulia also fits. Does anyone have one damaged because I’m most concerned with the electronics, black box on the side where the connectors go.
 
Looking for a steering column stelvio maybe from a Giulia also fits. Does anyone have one damaged because I’m most concerned with the electronics, the black box on the side where the plugs go.
The gear racks are the same from what I know. Could it be the steering sensor?

Sent from my Redmi Note 7 using Tapatalka
 
Exactly the rack and number like... My one after a crash the engine or rather the electronics on the engine damaged. Bought another whole one and damn... No power steering and communication limited or almost none. Did you replace it yourself?
 
Exactly the rack and number like... My one after a crash the engine or rather the electronics on the engine damaged. Bought another whole one and damn... No power steering and communication limited or almost none. Did you replace it yourself?
Isn’t it by any chance VIN coding.
And on CAN it sees it.
 
Win with can must work. On CAN it recognizes a different steering rack, a different VIN, but there is nothing you can do to clear errors, run tests, and the steering wheel assist module is not in the body computer, removed.
 
Win with can must work. On CAN it recognizes a different steering rack, a different VIN, but there is nothing you can do to clear errors, run tests, and the steering wheel assist module is not in the body computer, removed.
If you have a different VIN assigned to the steering rack, there’s no chance it will work.
 
If you have VIN coding then how could it work. A lot also depends on the year; possible that in older BC software it worked
 
Right now I have several MY20 models in for repair. And one has the power steering replaced with a used one. but I haven’t started it yet. looks like it’ll be fun.

because before the facelift there was no problem with swapping. didn’t even need to reset the prox.
 
Right now I have several MY20 models in for repair. And one has the power steering changed to a used one. but I haven’t started it yet. looks like it’ll be fun.

because before the facelift there was no problem with swapping. didn’t even need to do prox.

When will you test it because I don’t know whether to buy another steering column or simply bought scrap.
give your phone number or call 604650250
 
Further fight with the steering column maybe some smart person will weigh in with something
 

Attachments

  • IMG_20211227_091042 magiel.jpg
    IMG_20211227_091042 magiel.jpg
    29.8 KB · Views: 34
Does it work?
Was the steering angle sensor calibration done??
Is it visible on the CAN network ??
Did you do a road test???

In my opinion, Tech support awaits you, meaning 250 PLN loss at the dealership.
 
Amortyzatory
Back
Top