• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Radio

andrzejm36

Active
Joined
Dec 6, 2010
Messages
1,006
Location
Leszno
Car
Gulietta 1,4 T MA 170 KM
I have a question.. do our cars have the so-called ignition logic..
http://elektron.pol.lublin.pl/users/djlj24/studio24/kable/ignilog.htm
..the radio memory in the sense that if I turn off the radio with the knob button / radio nav / and the navigation screen hides and the radio turns off while driving, the car remembers these settings and at the moment of re-activating the ignition it will not automatically raise the navigation screen until I turn it on again with the knob. In other cases, of course, it starts together with the ignition and hides after turning off the car. Sometimes it's necessary, e.g., when programming an alarm :) for multiple turning on of the ignition or even if you don't feel like any sounds :) and the screen comes up. Maybe I am rambling.. but it annoys me a bit and I fear about the gear mechanism in the lifting screen. Or perhaps I didn't read the instructions carefully..??
 
Last edited:
A bit off-topic, but in Audi the radio turns off not after turning off the ignition, but only after removing the key from the ignition. In Alfa Romeo, to listen to the radio after turning off the engine I have to turn it back on with the button - too bad that the key in the Giulietta doesn't have that extra position.
 
I'm talking about turning off the radio with the button so that it will not automatically turn on after re-ignition, but only when I turn it on again with the knob.
west_23 .. do you have such a function?
 
Well, there is an option in the menu "last state" or something like that. But I don't use it, because I prefer clear situations, that is when the radio always turns on and off by itself or not.
 
Roman35 .. you probably have a Multitronic (Polifta?) and a different radio. In the old 2011 this / probably :) / there is no. I read in the manual and page 17 that..

The system turns on after turning the key
in the ignition switch to the MAR position and turns off
upon turning the key in the ignition switch to the STOP position.
After pressing the (ON/OFF) button in Fig. 1
it is also possible to turn the system on/off.
If the system is turned on with the engine off, it will
go out automatically after about 20 minutes.

pity.. it would be worth at least modifying that screen so it doesn't come up every time :).. ignition on
 
Last edited:
I'm talking about turning off the radio with the button so that it will not automatically turn on after re-ignition, but only when I turn it back on with the knob.
west_23 .. do you have such a function ?

If I turn off the radio with the engine running, it won't turn on again on the next start until I turn it on manually.
 
so you mean... :). / thanks for the info / It's pointless that it's not in the radio with nav. I think they mean that the monitor displays other features like DNA etc. That's why that stupid little screen keeps lifting up...
 
I'd like that "stupid little screen" but no one knows if the radio with navigation will work if there wasn't it factory. Of course when replacing everything.
 
and why wouldn't it work... only quite a bit of cable work / antenna, harness, etc. / And the map. The map has a generated code linked to the VIN of the car. A newly installed navigation may not work in reading maps in another car. This is unconfirmed info but an SD card with maps inserted into navigation in another car does not work.
http://fcagroup.navigation.com/cms/page.ActivationInstructions/en_GB/FiatEMEA/EUR
I don't know how it is after swapping the whole thing. If I'm wrong, colleagues will surely correct me. There were many topics on the forum.. TomTom, Garmin, etc. are alternative means to relatively outdated and expensive maps
http://www.forum.alfaholicy.org/mit...z_fabrycznej_nawigacji_giulietty_porady_.html
http://fcagroup.navigation.com/prod...g_AlfaRomeo_Giulietta_2011/en_GB/FiatEMEA/EUR
As for adding an original navigation, guys manage it
http://forum.clubalfa.it/threads/ra...tta-guida-dettagliata-per-il-montaggio.70797/
I personally would go in the direction of a B&M unit and USB in the original radio plus maybe TomTom / keeps the storage for trinkets and I have lifelong updates / or some Chinese all-in-one thing like / though expensive /
https://www.alibaba.com/product-detail/car-autoradio-for-2008-2014-ALFA_1925805503.html

ps. and for those who already have it, to add a reverse camera and some DVD or other navigation with an RGB output, that's probably the cheapest I found here
https://www.car-tronic.pl/interfejs-wideo-2-videorvcrgb-input-citroen-peugeot-ng4-flip-up-p8653
 
Last edited:
I didn’t want to start a new topic :rolleyes:

The retractable screen stopped working... it opens, but it displays nothing at all.

Of course in theory. Maybe someone has simply encountered such a problem?!
 
does anyone know what causes the radio with the nav sometimes to take long to turn on the logo Alfa screen and then it starts playing, whereas sometimes it starts immediately. It happens even after a short interval from turning off the ignition and turning it on again
 
Seweryn80 .. try resetting the device with AlfaOBD. I had something like one channel playing quieter.. it helped. Also check if the radio has any errors. There are many memory chips.. sometimes something doesn't load correctly and maybe that's why these problems. Sometimes the device starts up for about 15 seconds for me as well, and other times it plays right after turning the ignition on.. i.e. ..TTTM ;)

a.jpg
 
Last edited:
I don’t want to start a new topic either.
In a Giulietta from 2010 I have a radio with Blue & Me. Recently I have the following problem: the radio does not turn on. It turns on sometimes, but more often not. Is this a known problem? In view of the above, would buying a new radio, if it turned out to be faulty, involve coding? (this has been on the forum but I’m interested in a specific answer for this model).
thanks in advance :D
 
yes.. buying a new radio involves the code for that radio / there are companies that do this or websites.. code generators etc. / Remove your radio and give it to an electrician.. if you can, you can dismantle it yourself and check for moisture.. maybe you have loose connectors or damaged / bent cable /. There is no guessing, just remove the bezel / one Torx screw to unscrew in the glove compartment covered by a rubber plug / and the aluminum bezel is on clips. Unscrew the radio / 4 screws / and see what’s going on.
IMG_20170924_114303.jpg
2b.jpg
 
Thanks for the reply. Since my mom drives the car, I’ll have to get to it in my spare time and try to fix it, I’ll let you know how it goes. Thanks!
 
I’ll also chime in on the topic.

Is there a way in RadioNav to disable auto-extend and closing the LCD panel? Maybe via a computer?
It’s starting to irritate me that the panel rises with every ignition key turn. I can already hear the gears starting to creak ;)

andrzejm36 I saw you did something similar with the mirrors on the remote. Is this doable for a layperson?
 
Amortyzatory
Back
Top