• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Problem with a non-functioning horn

pakulak

New
Joined
Feb 24, 2026
Messages
3
Car
ALFA ROMEO GIULIA TI 2.0
Car ALFA ROMEO GIULIA 2.0 TI
Hello, I have a problem, namely the horn doesn't work, it worked before winter. The fuse under the hood is OK, the relay in the fender is too, but the problem is exactly on the way to the relay, because shorting directly makes the horn sound. Relay R1C (pin 30 - 12V, 87) power, (pin 85, 86) control module. With a meter: 86 + ground = 11.11V, 85 + ground = 0, voltage between 85 - 86 11.11V, but after inserting the relay and pressing the horn, the voltage between 85 - 86 is about 0.05V, where to look for the cause.
 
If I remember correctly there are two horns — check both, because just because one works doesn’t mean the other does. topic practiced on a friend's Giulietta.
 
What situation are you describing? If the second horn doesn’t work then the control module won’t close the circuit and both won’t operate, or what? After a direct short in the relay the car honks (it seems from both horns). Even after replacing the relay with a new one, the car doesn’t honk by itself, is it due to the PANIC, or from the steering wheel. I looked inside AUX PDC and there is neither water nor stuck pins. I keep referring to the schematic in the photo. After a direct short between pin 30 - pin 87 the car honks, after a direct short between pin 30 - pin 86 (with the relay inserted) the control module works because pressing the horn makes the car honk. The problem is in the pin 86 itself (its path from connector S024, because here the wire splits to supply pin 86 and 30).
 

Attachments

  • 1733529213839.png
    1733529213839.png
    191.3 KB · Views: 11
The topic can be closed. For correction, at the junction point S204 a cable that went to pin 86 cracked :)
 
Amortyzatory
Back
Top