• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Multi Air

Radcar

New
Joined
Jun 2, 2020
Messages
73
Car
Giulia veloce
Gentlemen, has anyone already changed the Multi Air on their car? If so, I would happily buy an old, damaged one
 
on warranty they replaced it for 1 or 2 people, but then the dealership takes a part because they have to settle with FCA
 
I understand
I’m considering attempting to repair this subsystem, I have some data on the construction of this device
 
I understand
I’m considering attempting to repair this subsystem, I have some data on the construction of this device

Does that mean that your module has failed? If so, at what mileage?
 
I think the guy is actually looking for a failed one to try reviving it, at least that’s how I understood it

Exactly, I’m looking for a damaged one to try to repair it if possible, possibly also from a 1.4 I would buy
 
In a 1.4 you can’t remove the electrovalves without causing permanent damage, and it’s probably similar in a 2.0. If the rest is gummed up by dirty oil and long service intervals, repair is purely theoretical.
 
Not long ago a video appeared on YouTube by Professor Chris about MA, and there the construction was discussed. A theoretically non-disassemblable part. But I heard there is a company that regenerates MA ;) So probably nothing is impossible.
 
Not long ago a video appeared on YouTube by Professor Chris about MA, and there the construction was discussed. A theoretically non-disassemblable part. But I heard there is a company that regenerates MA ;) So probably nothing is impossible.

There is a company, but the effectiveness of that regeneration is another matter... Some drive for a year on a regenerated actuator, others fail after 3 months, so it’s probably not worth it.
 
I think the cost of 5-6k for a car worth about 100k is not a tragedy, but on the other hand, if someone has MiTo Giulietta whose value after a failure is sometimes even less than 20k, I’m not surprised people try to revive this device :) I’d love to know if Radcar can do something with it. Another question that also appeared here on the forum about the MA filter - is there access to it in the 2.0? The answer probably didn’t come. In 1.4 the filter cost is a joke compared to the MA as a whole.
 
I think the cost of 5-6k for a car worth about 100k is not a tragedy, but on the other hand, if someone has MiTo Giulietta whose value after a failure is sometimes even less than 20k, I’m not surprised people try to revive this device :) I’d love to know if Radcar can do something with it. Another question that also appeared here on the forum about the MA filter - is there access to it in the 2.0? The answer probably didn’t come. In 1.4 the filter cost is a joke compared to the MA as a whole.

it failed a few times, there is no access to it.
 
Hello, I once had a Giulietta 1.4 MA, bought with about 60,000 km. It previously ran on Selenia, one replacement every 30,000 km, after starting in low temperatures there was misfiring, jerking, overall disaster. I took out the MA, disassembled it, washed it, cleaned it and the problem disappeared. I poured Motul, every 15,000 km, and for the next 60,000 km no problems. Only that was Giulietta I don’t know if it’s the same in Giulietta, for now I have 70,000 km and no MA problem.
 
The MA in Giulietta is the topic. It’s already been 10 days since the question who had this problem and the answer was yes - I heard. Please finally write who had an MA malfunction in a Giulietta.
 
gindek - pity you don’t know the details. After replacement, MA was tested and no fault found (info from service). And in addition to oil, a big influence is proper operation not to “smoke” when cold.
 
And in addition to oil, a big influence is proper operation not to “smoke” when cold.

I watched carefully the material with the guy from Veloce u Zachar and evidently the guy enjoyed fast "Warsaw" driving in his Julka, played with revs under the red field, changed oil per warranty recommendations (Selenia Digitek every 15k), and it’s almost certain he didn’t always pay attention to oil temperature while doing "pedal to the metal". Besides that, it was Veloce, which has larger air flows through the head due to higher power, so the MA actuator must work harder/more.
What I’m getting at is that MA in the Giulietta doesn’t have to fail as in the 1.4 engines, where obviously people didn’t change oil often.
For a week I’ve been driving a Giulietta with over 152,000 km, bought from a company where it served as a workhorse for one of the vice presidents. The car did 150k km in 40 months mainly on highways. Serviced under warranty at ASO Dukiewicz (oil changes every 15k - Selenia). I don’t know (I’m writing an email to the above ASO asking for information) whether the MA actuator was replaced and whether anything else was done besides the ongoing basic service (oil, filters, brakes). I’ll share when I have info.

Below is a photo from yesterday’s refuelling for credibility. The car starts nicely and runs smoothly when cold, doesn’t stall, doesn’t misfire, and doesn’t cough when pressing the accelerator. I’ll try to inspect the engine through the oil filler cap for cleanliness, change the first oil and have some knowledge of the engine’s condition, but for now it looks promising.

12.jpg




L.
 
gindek - pity you don’t know the details. After replacement, MA was tested and no fault found (info from service). And in addition to oil, a big influence is proper operation not to “smoke” when cold.

Driving up to 3000 rpm before the engine reaches temperature, do you consider that appropriate driving?
 
Driving up to 3000 rpm before the engine reaches temperature, do you consider that appropriate driving?

That’s how it was in JTD/JTDm, so it should be similar here. In general, the petrol engine oil should heat up faster, so you don’t have to wait as long as in a modern CR fuel injection engine where heat loss is minimal and when driving very gently in cold weather the engine is chronically underheated.

I see it like this: until there are at least 3 oil temperature bars on the gauge, I don’t enable Dynamic mode. In (N)ormal or (A)dvancedEfficiency the gearbox shifts quickly anyway, not allowing the engine high revs.

L.
 
Amortyzatory
Back
Top