• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Injection timing setting

zloty4

New
Joined
Apr 19, 2019
Messages
17
Car
MiTo 1.3 jtdm 2011
Hello. Do JTDM engines set the injection timing? The revs fluctuate and the mechanic said it needs to be adjusted.

Mito 2011 1.3 JTDM 95HP
 
It isn’t adjusted; the ECU handles it.

Sent from my moto g(7) plus using Tapatalka
 
More likely the EGR is playing tricks on you.
 
Last edited:
I have a Punto Evo 1.3 90hp from 6 years, and I’ll tell you this: sometimes after punching it when the engine is cold the revs fluctuate; not always but it happens. I read a lot about it and generally these engines behave like that.

I pulled out the entire intake manifold and EGR and cleaned everything; the dirtiest part was the manifold where the intercooler pipe attaches. The EGR is also disassemblable and can be cleaned. Additionally you can add Archoil to the fuel to clean the injectors. These procedures helped me a lot, though sometimes there is still some fluctuation, but it’s rare.
 
Thanks for the tips. Today I connected it to MES and made logs. I’m not sure, but everything points to the EGR. Attaching the logs. I’d appreciate analysis of these logs. Mito Does the EGR react to fluctuating revs, or do revs fluctuate because the EGR is misbehaving?Mito_EGR.jpg
I went to clean the EGR. The mechanic said it wasn’t very dirty. Most importantly there is a noticeable improvement. The engine now runs steadily. The revs don’t wander. Now occasionally there is a jump, e.g. from 750 rpm to 1000 rpm, but it’s rare. As for smoke, the mechanic said you have to drive it on the road more and it’ll be fine.
 
Also clean the intake manifold, you can do it yourself. It took me 7 hours. Do you have a DPF? because mine Punto doesn’t have one
 
Also clean the intake manifold, you can do it yourself. It took me 7 hours. Do you have a DPF? because mine Punto doesn’t have one
 
How many kilometers did you have when you cleaned the manifold? Was there a lot of gunk? Because I feel like trying that operation on my Punto.
Also clean the intake manifold, you can do it yourself. It took me 7 hours. Do you have a DPF? because mine Punto doesn’t have one
 
120,000 km, it was a bit smeared with soot but I thought it would be worse after that mileage. It’s worth cleaning it and in the EGR it’s important to clean the inside with this benzine; if the spring is dirty/burnt the valve won’t open and the car won’t start, I had that.

I cleaned the manifold with petrol, a cloth, and the EGR with a pin and a cloth.

120,000 km, It was a little clogged with soot but I thought it would be worse after this mileage. It’s worth cleaning it and in the EGR it’s important to clean the inside with gasoline, this spring, because over time when it’s dirty/burnt this spring it won’t open the valve and the car won’t start, that’s what happened to me.

I cleaned the intake with gasoline, a rag, and the EGR with a marker pen and a rag.
 
Amortyzatory
Back
Top