• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Gulia - stabilizer

majak

New
Joined
Dec 30, 2018
Messages
70
Location
Wieluń
Car
Alfa GT 1.9 JTD 16v, Lancia Delta 1.4 T-jet 150 KM
Has anyone of you replaced the rubber bushings of the front stabilizer link on a Gulia? Any recommendations? I was considering polyurethane, because the rubber ones from the OEM are unfortunately not available
 
I bought some PU for the front in advance stelvio (I can sell them), but in the end I didn’t replace them, because I only had a blown link. The rubber (except the bushing) are internally bound with a metal sleeve, and to remove them you have to fight a bit (didn't analyze the topic in detail, as it turned out I didn't need to replace them). And why do you want to replace them?
 
On body roll there is a clunk. I started with replacing the links, because one had a cracked shield and now it clunks much less (before replacement it clattered even on slight road tilts), but on bigger tilts it still isn’t perfect. From what I can see, besides the sleeve there should only be a rubber bushing. Unfortunately I can’t get the rubber alone from the OEM. And what size are these rubbers? I thought there was one size, but I see that, for example, this manufacturer offers different stabilizer diameters to choose from https://sidovski.com/product-pol-22...ra-przedniego-SPORT-Stelvio-16-Giulia-15.htmlScreenshot_20240408-210640~2.jpgIMG_20240326_191441_520.jpg
 
In the construction of this rubber there is also another structural element that makes it impossible to simply remove the rubber from the stabilizer rod after unscrewing the sleeve. That’s why these rubbers aren’t available separately from OEM, only as part of a rod assembly. If someone has replaced them, perhaps they can give more tips. I’ll check the diameter this evening.
 
Hey my friend Giulia already surpassed the magical 70 thousand km mark and on tilts you can hear a light knock; at the dealership they quoted 300 for the ball joints and 500 for the replacement; does anyone know how it looks at independent workshops?
 
Hey my friend Giulia already surpassed the magical 70 thousand km mark and on tilts you can hear a light knock; at the dealership they quoted 300 for the ball joints and 500 for the replacement; does anyone know how it looks at independent workshops?
Regarding the ball joints, I installed Meyle HD and visually, compared to the original (for the standard version, because they are different), they look sturdier. Cost of the joints about 100-120 PLN per piece. I did the replacement myself and considering that in such "fresh" cars there aren’t usually any complications with it, in my opinion 500 PLN is exaggerated. q4 For a DIY replacement of the ball joints you need:
2 jacks,
Nimbus 40
socket 16
After lifting the car, the second jack is needed to lift the lower control arm (best under the shock absorber mounting), to a position that will allow easy removal of the joint.
I recommend starting to unscrew with the lower bolt of the joint, then the upper one, tilt the joint slightly and it comes out.
Sit on a somewhat low stool, because the crouched position with your head in the wheel arch is uncomfortable and you have to turn those bolts for a long time.
Original joints look delicate.
For example Polish Ramtech joints are much sturdier, available for about 65 PLN each on all (not advertising, just informing).
 
For DIY replacement of the joints you need:
2 jacks,
Nimbus 40
socket 16
After lifting the car, the second jack is needed to lift the lower control arm (best under the shock absorber mounting) to a position that will allow easy removal of the joint.
Starting by unscrewing the lower bolt of the joint, then the upper one, slightly tilt the joint and it comes out.
Sit on a medium-low stool, because a crouched position with your head in the wheel arch is uncomfortable and you have to turn these bolts for a while.
Original joints feel delicate.
For example, Polish Ramtech joints are much sturdier, available for about 65 PLN each on All (I’m not advertising, just informing).
 

Related threads

Amortyzatory
Back
Top