• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Giulia Interface (full coding + errors)

kajak

New
Joined
Apr 28, 2020
Messages
15
Car
Giulia TI 2.0 280KM RWD
Hi,

I’ve seen that a similar topic already exists regarding interfaces, but there isn’t a clear information on which one to choose, or at least I haven’t found it.

Therefore - I would need the name of the diagnostic interface + the program with which I can play around with coding my Giulias. What do you recommend based on experience? What has the fewest problems?

Thanks in advance for the answers! :)
 
There is such a topic.
A dedicated Elm327 cable for Alfa (they differ in the middle, even though they look the same) is this guy on Allegro: pmfactory.
I have one from him, zero problems.

Besides the cable, you need two adapters: white and blue.

As for software: Multiecuscan.
I’ll scold you if you think you can code with pirated software.
Fortunately it isn’t a big cost
 
Exactly that little cable + SGW as the guy above writes.
SGW you can buy, you can make (cost around 3 PLN).
 
Hi!

Thanks for the answers, I think SGW has been installed since early 2018, so in my '17 Giulietta it won’t be installed.

Cable on the way!

One more question about adapters - what exactly are they for? I haven’t encountered such things in other brands.
 
One more question about adapters - what exactly are they for? I haven’t encountered such things in other brands.


You won’t connect ELM with all modules; If you choose e.g. the MES box suggests which adapter to connect. You also need a gray adapter and a blue one as others say.

SGW you can buy, you can make (cost around 3 PLN).

not sure if the guy really knows what he’s talking about. If the car has SGW installed (from 2018) you can read errors with MES, but you won’t clear them. A bypass from Epsonix guy, which enables this, certainly cannot cost 3 PLN
 
Not with all modules you’ll connect to ELM; If you choose e.g. the “gearbox” MES tells you which adapter to plug in. You also need a gray and blue adapter as other guys write.


I don’t know if the guy really knows what he’s talking about. If the car has SGW installed (from 2018) you can read errors with MES, but you won’t clear them. A bypass from Epsonix guy, which enables this, certainly cannot cost 3 zł

To be precise, we really don’t buy SGW, only a bypass.
Such a bypass can be made for free, using gold pins for example from a motherboard, or we can buy on Allegro (pin header dual) for 3 PLN.
We solder the pins, connecting them appropriately (the schematic can be found in Google under SGW bypass)
We solder, plug into the car’s connector and done.
Costs:
If you have a soldering station and pins, cost 0 PLN
If you don’t have the skills, you download the schematic, go to a friend with a soldering iron, two beers and you have a bypass.
There is no electronics, zero circuits. A 10-minute job
 
Besides the cable, you need two adapters: white and blue.
Probably gray and blue. in addition, if the car has SGW (production early 2018 or newer), you also need a SGW bypass, to buy e.g. at my online shop shop.stuff4car.com

- - - Updated - - -

SGW you can buy, you can make (cost around 3 PLN).
if you have on hand pins, soldering irons and time, you can make a bypass, but if you want a practically indestructible bypass made with top connectors for repeated use, tested (800 tests per unit), such a one that many drive with regularly (even me), then you have to pay for this small-batch product appropriately (there’s also some small support you can get from me as part of the purchase), I’m attaching a photo
20191025_170409.jpg
 
Amortyzatory
Back
Top