• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Flow meter

Roman35

BANNED
Joined
Sep 28, 2014
Messages
652
Car
Giulietta 150 KM 2016
Does the flow meter contain any element that is temperature-sensitive or dependent?
 
A thermistor is the heart of the flow meter, but in the 1.4 MA 170HP engine it isn't....
 
No, check in the Eper, and if you don't believe it, open the hood and see if you have it on the intake pipe (from the air filter to the turbocharger).
 
What does the 'air flow' parameter in MES mean? Or where does its measurement come from?
 
You have a MAP sensor integrated with the temperature sensor on the intake manifold / cylinder 1 counting from the timing belt/
 
that sensor is called a T-MAP sensor (combined temperature and manifold pressure). The part in the plastic strainer is the temperature probe, when it's covered in oil it cannot respond to quick changes in air temp.
just 3 electrical terminals?
 

Attachments

  • $_57.jpg
    $_57.jpg
    65 KB · Views: 57
The boost sensor is on the pipe in the inlet
 
Last edited:
Now the question is whether their operation technically depends somehow on temperature.
The rule I noticed is as follows (external temperatures):
-2°C-3°C - the engine stutters
4°C-9°C - it does not stutter
10°C-14°C - it stutters
15°C-35°C - it does not stutter
from 36°C - it stutters
 
these links from Maciek-156 do not work, so what should the pressure sensor be, simple, or bent?
 

Attachments

  • 20151202_122818.jpg
    20151202_122818.jpg
    135.6 KB · Views: 74
  • 20151202_122851.jpg
    20151202_122851.jpg
    137.6 KB · Views: 68
  • czujnik podcisnienia1.png
    czujnik podcisnienia1.png
    56.3 KB · Views: 46
  • czujnik doładowania.png
    czujnik doładowania.png
    115.9 KB · Views: 46
Simple is Bosch boost pressure sensor, bent is Facet intake manifold vacuum sensor
Now the question is whether their operation technically depends somehow on temperature.
The rule I noticed is as follows (external temperatures):
.....
Their operation does not depend on temperature but on the current atmospheric pressure, it affects the readings of the intake manifold vacuum sensor
 
air flow - what should be the correct result for 1.4 MA 170HP? because it shows some strange values in MultiEcuScan.
 
In the 1.4 MA engine there is no flow meter (MAP sensor), i.e. a classic sensor measuring the mass of air drawn in as in diesels, or as in the TS


Then provide these oddities


I no longer have access, but it showed around ~6...

EDIT: maybe someone has photos with correct data and can attach?
 
Last edited:
Amortyzatory
Back
Top