• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

EVAP error

rozewo

New
Joined
Aug 17, 2014
Messages
141
Car
Giulia
For every longer stop, an EVAP error pops up, which turns on the check engine. Sometimes it also appeared while drivingalfa.jpgdy. Has anyone solved it yet?
 
98% to replace the vapor canister filter. Haven't you tinkered with that air intake tube from the air filter to the engine?
 
The intake was disassembled but it is reassembled and original. So I will look for the filter, or maybe just replace the insert?
 
Nothing you can do - usually the valves that regulate pressure in this filter start leaking. expect about 1 thousand PLN. There may also be two EVAP solenoids under the hood damaged, but that's rare, or the air intake connected to the air filter goes. I suspect soon they'll program this out but that doesn't solve the problem.

- - - Updated - - -

The intake was disassembled but it is reassembled and original. So I will look for the filter, or maybe just replace the insert?

under this pipe there are wires, check their seal and if they are damaged at the entry to this pipe
 
IMG_3060.jpgIMG_3062.jpg

I’ve heard a lot about reflashing, but I couldn’t find any description of how to do it or whether anyone has actually done it.

The EVAP is either leaking, or has taken in water, or is clogged; after removing it, in my case it was heavier than new by about 800 g, and trying to replace just that white valve (esim) won’t help, you’d just waste money. I recommend replacing the whole canister and forgetting the problem.


On a different note... this forum section, in my opinion, is poorly designed... a lot of questions really repeat and I don’t blame people for not wanting to browse over a thousand pages of topics to find the right one. I know the search is fine for some, but it does happen, so maybe there should be a main section, e.g. about US vehicles, and in it items like US to EU conversion (e.g. lights, auto-leveling, door locks, windshield spray jets), EVAP often comes up, sunroofs, audio (navigation), brakes, fueling problems, wheels (rims, tires).... these are my thoughts - maybe someone will suggest to the admin some constructive change.

ps. then maybe some people wouldn’t get so pissed off and write “this has been discussed before”, “look it up yourself” :)
 
Three days ago Kamil from ShopEfi, with online support from Artem, while passing through, modified my engine ECU to the EU version without that filter and without the faulty under-hood vacuum lines; previously the EVAP P0400 + vacuums P1CEA caught me constantly, today I did 100 km in total across 4 installments and nothing, zero.
Fact is I didn’t have fueling problems, I can fill to the brim and the nozzle doesn’t pop back; when it starts to block and pop back, then I’ll probably consider some workaround.
 
Three days ago Kamil from ShopEfi, with online support from Artem, while passing through, modified my engine ECU to the EU version without that filter and without the faulty under-hood vacuum lines; previously the EVAP P0400 + vacuums P1CEA caught me constantly, today I did 100 km in total across 4 installments and nothing, zero.
Fact is I didn’t have fueling problems, I can fill to the brim and the nozzle doesn’t pop back; when it starts to block and pop back, then I’ll probably consider some workaround.

Some contact details too, I’d reflashing that as well
 
It caught me too, even though the error points to the valve. About a month ago it happened for the first time, today again. Each time the valve at 0% and filling of the canister similar; today not much bigger. Is it about the filter or the valve?
1.jpg
2.jpg


Sent from my SM-A546B using Tapatalk
 
From experience the valves don’t fail, it’s the charcoal filters that leak check valves and suck in fuel. For me it was the same a few years ago - except that I handled the filter through my own mistake - I filled in the morning (March) to full, adding when it bounced back. Almost to the brim. The whole day the car sat in the sun, vapors built up and then there was pssst. and a fuel smell. After 2 minutes the check light - the filter sucked in fuel, suffered irreversible damage. I helped him with a fuel additive (Archol) - it also increased fuel vapor pressure. An hour in the garage and 800 PLN and the filter replaced - since then I don’t add anything to fuel, and I fill up to first bounce. From almost 100k km, no issues.
 
Filling the canister is low. The check engine lit up the second time when the tank was below half. Has anyone observed these parameters on their car - canister and valve? I always fill to the first bounce and after twisting the nozzle I never had a problem filling the tank.

Posted from my SM-A546B using Tapatalka
 
Useful tip about filling to the first bounce, sometimes out of habit I add a bit more - it could overflow.

In my Alfas I never had EVAP problems, but many of my customers did: mainly cars hit from the front, often poorly assembled.

I also reflashed a few - none of them had complaints after.
 
Amortyzatory
Back
Top