• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Error C141C-86

Dario73

New
Joined
Feb 1, 2021
Messages
7
Car
Alfa Romeo giulia 2.0 2017
Part
Giulia 2017 2.0 sedan Poland. I have error c141c-86, it cannot be cleared, I know it’s a camera error something with communication. Could it be something serious. Thanks for any hints.
 
Part
Giulia 2017 2.0 sedan Poland. I have error c141c-86, it cannot be cleared, I know it’s a camera error something with communication. Could it be something serious. Thanks for any hints.
Calibration

Sent from my M2102J20SG using Tapatalka
 
Today I got the same error, and along with it C14AA-68 and the auto-long-distance and lane assist systems are disabled on the gauges, can someone tell me how to perform this calibration?

Proxy clean, no other modules have errors.
 
Today I got the same error, and along with it C14AA-68 and the auto-long-distance and lane assist systems are disabled on the gauges, can someone tell me how to perform this calibration?

Proxy clean, no other modules have errors.

Manually I don’t know, dealer will underbid mirrors etc. Interesting fact is you can buy a used camera, install it, do proxy and it works without calibration.
 
Yes, I spoke with Kamil and he suggested a visit to AutoGlass because they have calibration equipment, the only worry is I found another related error, question whether it’s a fault or a consequence of miscalibration:

C141C-86 Private can between HALF and DASM, and besides disconnecting the battery overnight I did nothing else, after reconnecting I set the steering wheel to 0 and did all resets, and cleaned the controllers - and this error appeared after about 20 minutes of driving.
 
Yes, I spoke with Kamil and he suggested a visit to AutoGlass because they have calibration equipment, the only worry is I found another related error, question whether it’s a fault or a consequence of miscalibration:

C141C-86 Private can between HALF and DASM, and besides disconnecting the battery overnight I did nothing else, after reconnecting I set the steering wheel to 0 and did all resets, and cleaned the controllers - and this error appeared after about 20 minutes of driving.

Private CAN is almost always an error so it’s not in red and cannot be turned off. Especially when you have no calibration in the camera; it is linked with the front radar and there is a private CAN between the radar and the camera.
 
Question whether to go and calibrate (600 PLN) or change the camera (from 200 PLN) and do as you say with just proxy
 
Question whether to go and calibrate (600 PLN) or change the camera (from 200 PLN) and do as you say with just proxy

so that it wouldn’t be on me but with me it has always passed. I saw a camera for 150 PLN. calibration at a dealer costs 360 PLN

- - - Updated - - -

so that it wouldn’t be on me but with me it has always passed. I saw a camera for 150 PLN. calibration at a dealer costs 360 PLN

I can advise buying through Allegro and you have 14 days to return if it doesn’t work.
 
I found a company that does camera calibration, I’m about 20 km away (from the place where I have to handle one order) I’ll go there, they want 350 PLN, to avoid the situation that I need a camera with a different number than the cheap ones from Allegro with the ending ......21
This is such a spite of my cars that are about to change owner... something always has to happen, and the car is already on a deposit.
 
I found a company that does camera calibrations, I live about 20 km away (from the place where I have to process one order), so I’ll go there, they want 350 PLN, so that it doesn’t turn out that I specifically need a camera with a different number than the cheap ones from Allegro with the ending ......21

This is some malice of my cars which are about to change ownership... something always has to happen, and the car is already paid for in advance.

you can also do a trick by unplugging the camera connector, make a proxy so that it isn’t there, then reconnect and make the proxy again, add it, it costs nothing
 
Yes, for posterity:

Unplugging the camera - proxy, plug the camera back in - proxy - did not remove the camera calibration error, it might be that if there is a smaller problem this option could work and it’s worth trying because... it costs nothing.

Unfortunately it didn’t help for me, so I went to Słupca (Greater Poland Voivodeship) and there in 15 minutes there was diagnosis, adjustment, calibration and – everything works.

The problem turned out to be that after changing the springs to normal ones the height difference between the left and right sides appeared, which exceeded the camera’s range, and that’s why the error popped up; after entering the current heights and calibrating the camera everything started to work.

Supposedly this happens when the suspension sits unevenly and goes out of tolerance, then you need to measure, calibrate and that’s it.

I recommend Mr. Marcin, and the price is fairly reasonable, 350 PLN and you don’t need to make an appointment in advance, the cameras and radars are done on the go.

www.autoserwisfortis.com
www.facebook.com/RadaryACC

IMG_20230720_124329.jpg
 
Last edited:
Amortyzatory
Back
Top