• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Engine controller, check engine - in a loop

Joined
Jan 29, 2022
Messages
12
Car
Stelvio 2018 280KM
Hi,
In December the check engine came on, the car lost power, it displayed the "Check Engine" message and information about the non-working "Start/Stop", it also disables the ability to change driving mode P/R/N. I went to the authorized service in Poznań, they determined they need to update the engine control unit - supposedly it’s responsible for the error. I’m not mentioning the price - it depended on data transfer, in the end they toyed with the issue for 5 days, basically every time they encoded it, the ECU would decode itself and so on, but eventually it worked. 3 hours of work, almost 1k on the invoice. They returned the car saying the error was repaired, and the "Start/Stop" system works without issues.

The fault appeared again after a few days, but I was on a trip, besides that I’m fed up with the dealership and proving that they should handle it as a complaint about the previous service. I don't trust their skills. The fault disappeared by itself after a few days, power returned, the "Start/Stop" that didn’t work before still doesn’t work. Yesterday it happened again.

After this long intro, a question for you. Have you encountered a similar problem? Is it definitely the ECU and is there a stable version that doesn’t crash every week? Is there any fix for it? Stelvio, 2018 year, 280HP petrol, mileage about 94k.
Thanks!
 
The symptoms you describe can be the result of many faults. Starting with a discharged battery, through a combustion gas pressure sensor in the GPF filter, and many others. It would help to have the exact fault that occurred. The dealership’s explanation is complete rubbish. That the ECU firmware is unstable and magically reverts to an older version??? Jesus. If I paid 1000 PLN and some moron tried to tell me something like that I don’t know what I’d do. Push them hard, https://www.alfaromeo.pl/kontakt
tell them how silly they are and demand removal of the defect under that service, since it’s the same issue still present.
 
The battery was checked already 3 times - that was my first lead, especially when the "Start/Stop" stops working - it usually disables when the charge falls below some acceptable threshold, I think around 70-80%.
They didn’t report the fault either. I also told them that the car emits quite a lot of exhaust (in my opinion above the norm and not only when cold). They kept it for a few days so the master of the workshop could drive it in the morning to see if anything concerning. Reaction as usual worthy of a dealership: "It’s not exhaust, it’s water vapour", then when picking up one of the service staff went out with me to return the car and himself commented "indeed" (I bet they didn’t check it 100%). I have no strength for these people, they keep the car for days and do nothing, but I need the car daily. That’s why I’m asking here.

The symptoms you describe can be the result of many faults. Starting with a discharged battery, through a combustion gas pressure sensor in the GPF filter, and many others. It would help to have the fault that occurred. Only then could we say something. The dealership’s explanation is complete nonsense. That the ECU firmware is unstable and magically reverts to an older version??? Jesus. If I paid 1000 PLN and some fool tried to tell me something like that I don’t know what I’d do. Push them hard, tell them how they talk nonsense and demand removing the defect under that service, since it’s the same issue further.

- - - Updated - - -

Voyager Group. St. Michael’s.

Which ASO in Poznań if I may ask?
 
I had something similar as you described in post 1 - replacement of the exhaust gas temperature sensor under warranty and the issue disappeared. Earlier three times the same faults, visit to the ASO - the fault was due to a clogged GPF so they just burned it in service mode. When I went for the 4th time with this issue and after the burn in service mode the car didn’t leave the service (on its own), they started looking and fixed it.

- - - Updated - - -

I had something similar as you described in post 1 - replacement of the exhaust gas temperature sensor under warranty and the issue disappeared. Earlier three times the same faults, visit to the ASO - the fault was due to a clogged GPF so they just burned it in service mode. When I went for the 4th time with this issue and after the burn in service mode the car didn’t leave the service (on its own), they started looking and fixed it.

The only difference is that in my case it didn’t lose power but went into "N" mode and only ran there.
 
Thanks, Kurynio also suggested it as a lead, it seems to be the first thing to check. Thanks for the help!

I had something similar as you described in post 1 - replacement of the exhaust gas temperature sensor under warranty and the issue disappeared. Earlier three times the same faults, visit to the ASO - the fault was due to a clogged GPF so they just burned it in service mode. When I went for the 4th time with this issue and after the burn in service mode the car didn’t leave the service (on its own), they started looking and fixed it.

- - - Updated - - -

The only difference is that in my case it didn’t lose power but went into "N" mode and only ran there.
 
The only difference is that in my case it didn’t lose power but went into "N" mode and only ran there.
Generally with this type of fault the power drop is only until the next restart. The indicator lights up, but there’s no power drop anymore
 
Hey, I’m trying to figure this out, but according to the service there is no part called exhaust gas temperature sensor - according to catalog numbers 1-2-4-5 they don’t appear in this car.

giulia czujnik.JPG

There is something like a GPF pressure sensor (marked in the picture).
Do you recall if it was definitely the combustion temperature sensor?


I had something similar as you described in post 1 - replacement of the exhaust gas temperature sensor under warranty and the issue disappeared. Earlier three times the same faults, visit to the ASO - the fault was due to a clogged GPF so they just burned it in service mode. When I went for the 4th time with this issue and after the burn in service mode the car didn’t leave the service (on its own), they started looking and fixed it.

- - - Updated - - -

The only difference is that with me it didn’t lose power and shifted into "N" and only drove in that mode.
 
On the service report it says "replacement of GPF sensor / internal damage" so maybe that’s what you’re listing ;)
 
Hey, I’m trying to understand this topic, but according to the service there isn’t a part called fuel burn temperature sensor - according to catalog no. 1-2-4-5 they don’t appear in this car.

View attachment 282752

There is something like a GPF pressure sensor (marked in the picture).
Do you suspect for sure it was the fuel burn temperature sensor?

And that’s what I’m talking about, the GPF pressure sensor.
The EGT sensor is in another place.
 
OK, I’ll share how the situation was solved, because the error was eliminated 100%. As you wrote, the problem was a faulty GPF sensor. The mechanic ordered a proven, working used one. Replacing it itself takes 10 minutes - the sensor is under the hood, almost on the surface, nothing needs to be removed, raised etc. Since replacing the sensor, the checkengine has not lit up once, the car behaves normally and works as it should. There is one caveat… after replacing the sensor by an non-authorized mechanic the D/N/A (ability to switch maps e.g. to Sport or Eco from the joystick) was disabled. A normal mechanic does not have software to update the car’s computer to change the sensor (regular diagnostic systems don’t have extended modules for every model and won’t pass their protections).部分 was replaced and even though it works, it clashes with DNA. There are two paths: replacement of the sensor by an authorized service or diagnostics, clearing errors + possible computer updates privately at some Alfaholic or a friendy Alfa mechanic with original software - where better and cheaper you know. Summing up: the issue is trivial and if the car is under warranty it should be repaired immediately. If not, it’s also simple, but you have to tinker - option with a used sensor, replacement by a mechanic and updating the computer is 200 + 100 + 200.
 
Hello
I’m refreshing and joining the topic. Symptoms like a colleague: no start/stop system, check engine light and DNA does not work (it’s in N). At first I linked it to recently independently replacing the battery, but now I think it may be a clogged GPF. For the last three weeks I’ve been driving the car only on the "road" 1.5 km because we have a small dog that needs feeding every 5 hours. I have to step away from work for a moment, but I don’t have time for walking, so the car does 1.5 km, a short break, and again 1.5 km. I know - it’s murder for the engine, but I’m very busy and have to function like this.

So the question: did I most likely clog the filter?
 
Read and clear the faults on all CAN buses.
I had an issue with a non-working DNA selector, check engine and s/s off when I shoved frames with the wrong speed into one of the CANs and one ECU went stupid. I don’t remember which one but it’s not important here. The important thing is the effect as you describe and Clear faults fixed the issue. Or try disconnecting the battery for a moment again, maybe it will reset something.
Obviously something else could be going on for you, but regarding the GPF - probably no one will tell you anything sensible without reading the errors.
 
Last edited:
Read and clear the faults on all CAN buses.
I had an issue with a non-working DNA selector, check engine and s/s off when I shoved frames with the wrong speed into one of the CANs and one ECU went stupid. I don’t remember which one but it’s not important here. The important thing is the effect as you describe and Clear faults fixed the issue. Or try disconnecting the battery for a moment again, maybe it will reset something.
Obviously something else could be going on for you, but regarding the GPF - probably no one will tell you anything sensible without reading the errors.

I disconnected the battery for a moment right after the incident and since then it’s OK. In two hours I’ll drive on a small test run on manual gear shifts to keep revs at 2500–3000.
Unfortunately the rest of what you’re saying is black magic to me for now and I don’t have time to learn it, though I have the will and plans. If needed, a service appointment is on Wednesday, there one "stelwiusz" works and there’s a chance for a thorough answer from him.
Thanks for the advice, I’ll come back to this when I catch up on work a bit.
 
Ok, let me know because it’s interesting. Good luck!

So it won’t be that easy after all.
On Friday I drove with manual gear shifts for about 30 km to burn out the soot from the GPF. Unfortunately today the same again - engine light and, unfortunately, loss of power at a roundabout (very uncomfortable) and then about 500 m further the engine turned off at a traffic light. I called my neighbor and we connected his OBD. An error P008A appeared. In short, too low pressure in the fuel pump. On Wednesday I have a service appointment, but damn I’m afraid to drive. The car slows down at random moments (usually at intersections and roundabouts) and often stalls. Strangely, when I was driving on Friday with manual gear shifts and higher revs, there was no problem. Could this cause higher pressure in the fuel system? Can someone confirm? Because believe me - in heavy traffic stalling every kilometer is a bad pastime.
 
If it's under warranty, let them come and take it themselves. I had that once with another car. Why get yourself stressed.
 
Amortyzatory
Back
Top