• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Disabling ASR

Roman35

BANNED
Joined
Sep 28, 2014
Messages
652
Car
Giulietta 150 KM 2016
Is there any way to temporarily disable the ASR system myself?
 
Yes, for the duration of the connection to the Continental control unit all aids are off, only the 'D' mode then won’t come into play
 
- even while driving with a connected computer does it work like that?
Yes, I usually connect my phone via BT or Wi‑Fi (because it’s easier and always at hand) when I want to have a bit of fun [emoji6] but it doesn’t matter - it can be a laptop, the important thing is that the connection is there. Oh, one more thing, even though the VDC is off, the ABS still works
 
Last edited:
I know, that's why only the ABS works and the traction control doesn’t. It wouldn’t work the other way around. For ABS operation, VDC isn’t required
 
Last edited:
Yes, for the duration of the connection to the Continental control unit all aids are off, only the 'D' mode then won’t come into play
In MES I have two control units named Continental. Which one is the correct one for this car?
 
which exactly app on the phone can you use to switch off TC? can you provide a link? because I have a Bluetooth ELM327
it’s weak that in the Julka you can’t properly switch off traction control..

I even considered pulling the fuse to play in the snow but the manual doesn’t indicate which one

and unfortunately only N mode remains at disposal without TC
 
Managed to turn it off, but then you won’t be able to log with the ECU at the same time, and that’s what I was aiming for.
 
which exact app on the phone can you use to turn off the TC? can you provide some link? because I have a Bluetooth ELM327
it's weak that in the Julia you can't properly disable the traction control..
I miss this too but what can you do, maybe someone smart will one day figure out how to crack the BCM in this regard ;). I use paid AlfaOBD and I don’t know of any other Android program that would support the body in the Julia.

- - - Updated - - -

Managed to disable it, only then you won’t be able to make logs from the ECU, and that’s what I wanted.

well yes you can't do it at the same time, perhaps the more brutal option is to disable by fuse or relay (maybe someone can provide some details?) and then clear all errors
 
both a lot and not much, such an amount may pay off quickly - even after one visit to the service center they can charge more. The plus is that it’s always at hand. I used BT so far and there were no problems with it. I also have WiFi, but due to lack of time I haven’t yet modified it for Alfa, so I didn’t test it—probably not a big difference, maybe only in range. When buying the elm for BT it’s best to look for one that is modified for Fiat group, and for body, climate and some modules an adapter will be needed
 
To avoid going off topic - everything is described on the MES forum (but it’s easier to buy a ready-made one—the price is the same)
 
Amortyzatory
Back
Top