• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Coding Giulietta

osy4

New
Joined
Aug 7, 2017
Messages
152
Car
Giulia Q
Do you know someone who knows and practices coding Alfa Romeo cars? I think such a person could solve a few of our nagging problems. Do you know a wizard with a computer and experience?? Or perhaps a friendly ASO soul who has access and knowledge and who would be happy to tweak a bit from factory and from the smart people in Italy?? Of course for a fee :). There are tons of people coding VAG, but what about the AR system?
 
VAG or BMW have easily accessible programs for coding/programming controllers, lots of documentation, etc. I haven’t heard of similar programs in the Fiat group.
 
But there is some software and someone has to write updates for it. So probably some specialists exist.
 
Depends on what needs to be coded, but in my opinion there should be no problem, whether Italian, German or Japanese. I’ve driven my Honda to people who hadn’t dealt with it and they did what I wanted, it’s a matter of getting coding under control. In my view, start-stop depending on the program should not be a problem, worse with other things, but that’s just my speculation. I intend to go somewhere to have start-stop disabled and the throttle opened on Dynamic mode.
 
If anything, I’m getting involved. Also I want the dynamic mode to roar louder because when switching it changes settings you can control with it. And I want that passenger-side mirror that lowers when in reverse. My holy wish as well, to perhaps increase the range of HK adjustment so we could set something and the music would flow as it should on HK :). It would be nice to also have information between gauges about instantaneous consumption rather than some strip like in old BMWs. Could also improve steering of the gearbox. In BMW, where there is the same ZF gearbox, to switch from R to D you just tap the joystick toward you once, in Giulietta a tap goes to N and only after two to D. I know you can use the right paddle on the steering wheel but out of habit I reach for the lever :). Air conditioning. So it doesn’t start up after each descent with temperature on LOW, only when we start it ourselves. It would be great if we could also switch phone contacts on the steering wheel or the recent call list with a knob on the wheel rather than only on the console near the lever. It would also be nice if when we activate the phone, when the handset on the wheel ends a call it returns to the last function before. I know that’s a lot but maybe :)............ More wishes as I remember them :) Keeping fingers crossed :)
 
Nice concert of wishes - especially with that instantaneous consumption ;) I don’t know who would handle the graphics on the display for you, and anyway, instantaneous is in N mode.

For example, I miss any information about travel time or lap, acceleration etc in track mode, and I’ve seen it in Giulietta. In general I wouldn’t pay attention to these trifles, because when I sat in a Q I was looking only ahead and at the tachometer, but I wouldn’t mind if it had such features.

Switching to D works as soon as you hold the button behind the stick. The range of audio adjustment I also think is unlikely. Climate and phone perhaps still doable, but that’s a higher level. I’ll also ask for the code when they copy it, maybe I’ll figure something out.
 
Last edited:
Depends on what needs to be coded, but in my opinion there should be no problem, whether Italian, German or Japanese.
After all, this is a key issue – firstly how the controller was written, secondly how to access the configuration parameters. For example, BMW has a lot of hidden parameters in controllers that can be modified. They are pretty well described and documented.

It’s not like some "computer nerd" sits down, clicks and there’s a ready-made solution. Controllers do not have open documentation, you don’t know what the communication protocols are, etc.
 
Therefore we need someone who has already done it in FCA products. But I’m rooting for this "computer guy" :)
 
Therefore we need someone who has already done it in FCA products. But I’m rooting for this "computer guy" :)
Mały_777 from our forum is such an ambitious guy with vast knowledge and a background. But it’s not that simple. Jahu is right. The only consolation is that for Him nothing is impossible, sometimes it’s just not worth it:)

Besides, some issues you won’t overcome without mechanical changes. I suggest reaching out to POGEA Racing because they have already knocked many doors and have a lot of experience with Giulias.
Here is, for example, the exhaust system layout for Q: http://www.pogea-racing.com/news-detail/412069/giulia-quadrifoglio-abgasanlage/0/ , which neatly fits modifications around 700 HP and the price starts at 4000 Euros...!
 
Last edited:
Amortyzatory
Back
Top