• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Ceiling lights

gegu007

New
Joined
Dec 29, 2023
Messages
22
Car
Alfa Romeo Tonale
Hi everyone,

I have a question, has anyone had a defect with the ceiling lighting, specifically that the buttons on the console do not respond to turning on/off. The issue concerns only the LEDs on the front ceiling (driver/passenger/both/door opening). The rear light as well as the lights in the doors, the glove compartment, footwells, sun visors work, so this isn’t a fuse problem, importantly the button backlighting works, so the console is probably fine too. Has anyone had a similar problem?

Regards
 
Similar for me: the panel of the front lighting buttons doesn’t work; the rear bench lighting buttons work without issues. It looks like some software bug.

Let’s report it to the A.S.O. (authorized service) and wait for a software update.
 
thanks for the reply, that’s exactly what it looks like to me, I’m curious if there is any reset procedure, have you reported this to the A.S.O.?
 
Hello, everything works correctly for me. I don’t know how it was before because I didn’t check, and in early December I had a system update installed.
 
Last edited:
I have a question, has anyone had a defect with the ceiling lighting, specifically that the buttons on the console do not respond to turning on/off. The issue concerns only the LEDs on the front ceiling (driver/passenger/both/door opening). The rear light as well as the lights in the doors, the glove compartment, footwells, sun visors work, so this isn’t a fuse problem, importantly the button backlighting works, so the console is probably fine too. Has anyone had a similar problem?

For me the buttons work, they worked before as well. I haven’t had a chance to do a system update, unless something came in OTA.
If you upload your software version we’ll compare.
 
Hello,
checked at the A.S.O., no errors logged in the computer, it’s a so-called software bug, reset on the battery (AKU) solves the problem,
US guys (Dodge Hornet) say this bug may occur if after a software update the battery wasn’t reset, the service didn’t confirm this, though based on cases in Hornet it seems logical.
Anyway, case closed
Thanks for the interest
 
Last edited:
Thanks for the info. Resetting the battery by unplugging the quick-disconnect on the negative for 10s solved the problem. It even didn’t require recalibration of the systems.
 
Hi Icecold,
I have another question about this reset via the battery quick-disconnect, do you remove it or just slide it? And are there any elements that are better to switch off before the reset, e.g. handbrake, etc?
thanks in advance for the answer,
Regards

aku tonale.JPG
 
they told me to come to the A.S.O. to disconnect-connect the battery - something the lady muttered that some errors might pop up - I don’t know if they assumed I’d be such a dunce that I could even mess something like that up, or if the car designers are such dunces that disconnecting the battery could mess up the ECU... I didn’t look into it - the service is 5 km away, and free washing by foot doesn’t happen ;)
 
Thanks for the reply, that’s why I’m asking, I’m also worried about these errors, but I won’t drive around unplugging the battery to service every time, I’m coming from a similar assumption that in Alfa they designed this quick-connects exactly to reset the computer without unscrewing the battery terminal with a key, at a free moment I’ll unplug it and we’ll see
The question only to Icecold, whether somehow the car was configured before unplugging the plug: alarm, handbrake, etc., though I’m probably overthinking because this is my first one alfa...;)

Thanks
 
Thanks for the reply, that’s why I’m asking, I’m also worried about these errors, but I won’t drive around unplugging the battery to the service every time, I’m coming from a similar assumption that in Alfa they designed this quick-connects exactly to reset the computer without unscrewing the battery terminal with a key, at a free moment I’ll unplug it and we’ll see
The question only to Icecold, whether somehow the car was configured before unplugging the plug: alarm, handbrake, etc., though I’m probably overthinking because this is my first one alfa...;)

Thanks

Hello, if you unplug it for a long time it will throw errors. (info from the service)
 
Just to confirm,
disconnected the battery for a few seconds and it’s OK, practically all settings remained, so go ahead – zero errors.

Regards,
 
Just to confirm,
disconnected the battery for a few seconds and it’s OK, practically all settings remained, so go ahead – zero errors.

Regards,

Just a small update, if someone has a problem with this backlighting,
ultimately it’s resolved by replacing the wiring harness, for me the problem kept appearing, only this replacement solved it.
 
Amortyzatory
Back
Top