• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

AUX socket

fala

Member
Joined
Jun 12, 2016
Messages
174
Location
Koszalin
Car
Gulietta 1,4 tb
I wanted to ask if anyone has tried to add an AUX socket in this way?https://youtu.be/1KA_dDPnmIM
The radio from a Fiat, which is in the video, looks almost identical to mine in the 2012 Alfa.DSC_0197.jpg
After bridging these pins, DSC_0220.jpg the display showed DSC_0224.jpg. Maybe this will work, I just need to search for a jack somewhere.
 
Last edited:
I did it this way and it works. Just buy a cable with a blue 8-pin connector (Blaupunkt) and a jack socket. Bridge the pins and it works.
 
Last edited:
Yes, this cable. I mounted the jack socket in this recess near the DNA switch (small compartment - pre-facelift). The cable can be easily routed from the radio, behind the center console, and exit from the bottom to the mounted socket.
 
Mounted and it works :) DSC_0232.jpg
At the same time I added an additional charging socket in the glove box. DSC_0235.jpgreceived_687186148444790.jpg
 
And the USB power in the glove box, where did you get it from?

From the cigarette lighter power supply cable - near the legs of the front passenger, but there might be an easier place.

- - - Updated - - -

how do I access the plastic where you made the aux and the one above?
The glove box with the DNA switch can be removed by lifting the whole unit up.
If you’re thinking about mounting something in that empty plastic above the compartment, there’s basically no space.
 
From the cigarette lighter power supply cable - near the legs of the front passenger, but there may be an easier place.

- - - Updated - - -


The glove box with the DNA switch can be removed by lifting the whole unit up.
If you’re thinking about mounting something in that empty plastic above the glove box, there’s basically no space.

I thought about installing the seat heater controls there, but they also fit into the plastic and you need about 5 cm of space.
 
Amortyzatory
Back
Top