Removing rear side panels

[Alfettone]

Hi friends, how do you remove these rear panels?
Do I have to disassemble the panel with speakers and backrest? If you do, some photos of the bolts to remove?

 

[motogold]

Hey. Not. only do you dismantle the panel itself.

 

[Masa625]

4x white plastic bolt
1x black bolt

Pokaż załącznik 229386
Pokaż załącznik 229385

 

[Alfettone]

Thanks for the masa625 response .... but I did not understand if I should disassemble the panel and the back of the couch !!!

Note: Why do not you see the title of the thread and my messenger and motogold ??

 

[Masa625]

You did not need to disasemble any couch or back panel.

wysłane z WC

 

[Alfettone]

All empty .....

 

[Alfettone]

I read the private message, I also read them nothing, all empty ...... I can only read from tablet android !!! It's definitely a problem with my browser, I hope to resolve it soon.
Thanks really for the explanation, now I try

 

[bussoholik]

Hi friends, how do you remove these rear panels?
Do I have to disassemble the panel with speakers and backrest? If you do, some photos of the bolts to remove?

Pokaż załącznik 229371

Hello, you don't need to disassemble any components . This panel is mounted with 4 plastic bolts/pins and you have to pull this panel toward the headrest. Try to grab it with your'e fingers sliding them into upper gap where the C pillar cover meets the headlining, then pull whole panel towards you it should let go quite easily. Plastic pins are reusable, but sometimes they like to bend on reattaching so take caution when you put this panel back on it's place.

 

[Alfettone]

Hey bussoholik thanks also to you for the good explanation ..... tomorrow I will do the job !!!

 

[Alfettone]

Perfect guys, I managed to remove the panels ... but now I do not understand how to insert the black bolt in the hole (red arrow) .... there is no space to be able to press on the bolt Maybe I'm not sure!!

 

[Alfettone]

Ok I was mounted all over (the black bolts were easy to put on ... I thought the position was more awkward). But I have two rubber inserts, very difficult to position !!!