• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Trunk release button

1

159alfa

Guest
Hello. Has anyone run into the issue that pressing the trunk lid release button doesn’t work? I know I can do it with the remote, but sometimes the remote is in the ignition and you have to turn the car off to get to the trunk. Thanks in advance for any information!
 
Hello. Has anyone run into the issue that pressing the trunk lid release button doesn’t work? I know I can do it with the remote, but sometimes the remote is in the ignition and you have to turn the car off to get to the trunk. Thanks in advance for any information!

I have the same... when it was cold it worked poorly and eventually stopped. You need to take the panel apart and look at what’s going on there. Look on the forum - the guys already wrote about how it is with the handles.
 
This is what I call a lightning-fast answer:) I’ll try to dig into it then. And do you know how to remove the message from the key (service)? Thanks!!
 
Mate, 159alfa there is also an option that you have this button disabled in the computer between the gauges, maybe first check there if it’s active. It happened to me after disconnecting the battery, but just changing one of the options helped. Regards
 
It didn’t always work for me either. It turned out that due to a low battery level during starting, when the current draw is highest, the electronics freaked out. It helped to disconnect the battery clamps for about 20–30 minutes. Regards. - Rafał
 
Mate, 159alfa there is also an option that you have this button disabled in the computer between the gauges; maybe check there first if it’s active. It happened to me after disconnecting the battery, but it was exactly the changing of one of the options that helped. Regards

After disconnecting the battery, it’s enough to close and open the doors with the remote, and the trunk release button becomes active (at least that's how it is with mine).
 
Sorry to bring this up again, but do you know which option between the gauges turns off this button?

If I don’t forget I’ll check you tomorrow ;) Guys, check the option to open the trunk from inside the car (with the key in the ignition) after opening the doors; when they’re closed it won’t work :P
 
At first I played with it and set it to OFF. And for a week I was pissed that my button got ruined :sarcastic:
Such OT :)
 
For me the button in the headliner doesn’t work at all. It’s illuminated, but whether I set it to on or off it still doesn’t work.
 
But does it work with the remote? Then you probably need to look for the cause with a multimeter. You have to probe the button.
 
It works with the remote, only it’s annoying that I can’t open the trunk when the car is running.
 
I had the same problem. Disconnecting the battery for a few minutes and several changes in the Indep boot off/on in the computer helped. The whole thing and it’s done.
 
Mine also doesn’t work despite clicking on/off. Well, I’ll disconnect the battery for a while, and if not, I’ll pull the panel and check with a meter whether it closes the circuit.
 
Amortyzatory
Back
Top