• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

TPMS - coding, disabling, annihilation :)

philip

New
Joined
Jul 13, 2017
Messages
19
Car
MITO
Hi.
Please tell me if there is a possibility to disable this contraption in MES, AlfaOBD etc. I don’t want it on my car, I monitor the pressure myself and I have no intention of buying 8 of them - in the summer all of them failed and I would need some more for the winter. However the warning light and the error message annoy me ;)
 
Yes. The question is whether this thing can be disabled somehow so that the warning light doesn’t irritate.
 
I’m afraid not, because it’s a homologation requirement. But if the sensors are functional, it’s probably similar to the Giulietta, where you press the memory button and the warning light doesn’t come on.
 
You can try unplugging the module and do a alignment/calibration.

Sent from my M2007J3SY using Tapatalka
 
Or maybe someone with MES or AlfaOBD access could check if it can be disabled in the options?
 
The TPMS control module can be disabled both by MES and by AlfaOBD. I just did that and said goodbye to the tire pressure warning. ;)
 
The TPMS control module can be disabled both by MES and by AlfaOBD.
I just did that and said goodbye to the tire pressure warning.

Nice :D Was it enough to disable it in the program or did you physically unplug the control unit? Can you share a photo of how that option looked?
 
Nice :D Was it enough to disable it in the program or did you physically unplug the control unit? Can you share a photo of how that option looked?

Just a software change ;)

System -> Others -> Tire Pressure Control (TPMS) TRW (yellow adapter needed) -> Adjustments -> Execute -> Select the status of the module -> Set to "Disabled" -> OK -> Confirm -> Done

For me, after this procedure the module status in MES remains shown as "on" but it doesn’t show errors.
 
In AlfaOBD you can disable TPMS by connecting to the Body via the yellow adapter -> Vehicle configuration change -> TPMS -> Disabled (Not enabled).
 
Awesome, do you need to do alignment? I’m asking because I’ve never fiddled with MES or AlfaOBD.
 
Amortyzatory
Back
Top