• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Software upgrade

Maciek-156

Active
Joined
May 19, 2007
Messages
9,192
Age
59
Location
Warszawa
Car
AR Stelvio 2.0 Turbo 280KM Veloce 2021
Today during a service the software upgrade was loaded into my Julka. The first one concerned the body computer and modifications to the software that communicates with the multifunction steering wheel. The second (I think more important) concerned the fuel injection control unit and included, among other things, the software for the S&S system (unfortunately at the tester the name of only the first update is displayed – there may be dozens more after it) and probably something else, because the operation of the gear-shift indication function (arrows) changed, fuel consumption dropped, acceleration increased (but that might be subjective), perhaps something was changed in the DNA system. You have to inquire about available modifications
 
Since when is this soft? I had a service a month ago and they told me nothing. Although maybe I had it installed earlier, because I used to visit the service regularly. Is it possible to check the software version myself?

Thanks for the info!
 
They also installed new software on my QV, such information I received in ADF but what they were about I will know next week.
 
Today during a service the software upgrade was loaded into my Julka. The first one concerned the body computer and modifications to the software communicating with the multifunction steering wheel. The second (I think more important) concerned the fuel injection ECU and included, among other things, the software for the S&S system (unfortunately the tester shows only the name of the first update – after it there may be dozens) and probably something else, because the operation of the function (arrows) suggesting changing gears changed, fuel consumption dropped, dynamics increased (but this may be subjective), perhaps something changed in the DNA system. You have to inquire about the available modifications

This is interesting information. In 2-3 weeks I’m going for the first periodic inspection. Will the gentlemen install the upgrade by themselves or do I have to ask for it? Apparently in DNA it now starts on the same program the car shut off on. For me it was only like this on A. This function would also be useful with D. S&S General is well developed, but sometimes it gets confused and is slow. I recently drove a Mercedes C with Start-Stop and I must say I was impressed. Here AR has room to improve and maybe after the upgrade SS will improve a bit.

Regards
 
Apparently in DNA it now starts on the same program on which the car was turned off. For me it was only like this on A. This function would also be useful with D.
Regards

Yeah right..... I’m surprised to hear that again, but just two days ago (since I asked them several times over months) I asked personally at the BB official dealer and they have no information on this – there is no new software regarding DNA, at least as far as manual transmissions are concerned. Is what you’re writing perhaps about the version with the TCT? I’d love to know details if there is at least one Julka owner on the forum (with a manual) whose car after turning on the ignition remains in mode D :-)
 
...perhaps something was changed in the DNA system.
In gear "D" you can now shift at speeds up to 110 km/h (it used to be 100 km/h). After turning off the engine it returns to mode "N" - this hasn’t changed because it’s supposedly a safety requirement.
 
Last edited:
In D mode you can now shift at speeds up to 110 km/h (it used to be 100 km/h). After turning off the engine it returns to mode "N" - this did not change because allegedly it’s a safety requirement.

since February 2012 the instruction text has been changed (available on http://aftersales.fiat.com/elum ) which reads:

"WARNINGS
❍ Direct switching from “Dynamic” mode to “All Weather” mode and vice versa is impossible. You must first always
return to “Normal” or “Natural” mode (for versions/markets where provided), and then choose another mode.
❍ The active driving mode before engine shutdown remains in memory on the next startup.
❍ In case of system or A-rod lever failure (Fig. 1), no driving mode can be activated. A warning message will appear on the display."

However, the entry regarding the speed to which you can change modes was removed; for me it has always been 110 km/h (as my 2010 paper manual says) and after installing the latest software nothing changed in this regard. This implies that the change did occur and the car should stay in D mode and there is no speed limit when switching, but no one knows anything about it and the service center claims there are no changes in the software regarding DNA
 
Last edited:
In D mode you can now switch at speeds up to 110 km/h (it used to be 100 km/h). After turning off the engine it returns to N - this did not change because apparently it’s a safety requirement.
From what I know, it was always 110 km/h, so it could not have changed :)
There will never be software that allows staying in D mode.
 
There will never be software that allows staying in D mode.

On what basis do you think so? Any specifics? Since the amendment to the instructions clearly stated that the “Driving mode active before engine shutdown remains in memory on the next start,” this straightforward (IMO) conclusion follows that it applies to all modes and I don’t think anyone would change the instructions just because they had nothing better to do... :)
 
Last edited:
For me DNA was updated and nothing changed, after turning the ignition on it still returns to zD or N. I don’t know about turning off D above 100, but I will not hesitate to check.
 
For me DNA was updated and nothing changed, after turning the ignition on it still returns to zD or N. I don’t know about turning off D above 100, but I will not hesitate to check.

because probably they updated not DNA but S&S for you, in any case no one has physically seen a DNA update yet, though honestly I’d like to be wrong ;)
 
Last edited:
In qv there is no S&S, such a detail. At the service they told me everything is up to date (car from early this year)
 
I was at Pol-Car today and they only replaced the "body computer" software, because the rest I already had latest. So probably a placebo effect, because after the last change I didn’t notice anything special...
 
I was at Pol-Car today and they only replaced the "body computer" software, because the rest I already had latest. So probably a placebo effect, because after the last change I didn’t notice anything special...

you don’t know what the modification was about? If it’s for the body, I had recently updated only for the "change of how you control volume" nothing more. By the way recently I managed to change the DNA modes at 150 km/h, I don’t know if it’s a coincidence or the ECU software change had something to do with it
 
Yes, as Maciek wrote earlier, it was about the steering wheel buttons. Precisely about which ones I didn’t ask further. The service man claimed there’s no option for software that leaves the "D" mode after the engine is turned off. While at it I filed a complaint about worn clutch (just the pedal pad) because compared to gas and brake it looks terrible. If they accept it (highly unlikely), I’ll let you know, because others reported similar issues...
 
Amortyzatory
Back
Top