• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Shift paddle

dover

New
Joined
Jun 20, 2019
Messages
3
Car
Alfa Romeo Giulietta 170km TCT
The problem I’m dealing with is that the "-" paddle for shifting gears at the steering wheel doesn’t always work. Shifting gears using the lever is always correct. I should note that if I hold the "+" paddle (shift up) and press the "-" then the gear will drop down, which in my opinion rules out mechanical damage. Maybe someone could help me solve my problem.
 
If you use the paddles while the transmission is in auto, the sluggish downshifting is more or less the rule of thumb for this model. I have the same with mine and it was the same in other CTVs I’ve driven:
When the gearbox is set to full automatic — in the N range to downshift I had to hold the paddle longer, in D mode shorter.
When the gearbox is in sequential mode — regardless of the mode the response is “instant” as for this gearbox. Of course it will never allow downshifting if that would cause too high engine RPM.
 
Thanks for the response, but we didn’t understand each other—the paddle doesn’t respond sometimes and doesn’t change gear at all
 
At what moment does the downshift paddle not work:
1. when the gearbox is set to automatic (the lever can be moved to P R N D)
2. when the gearbox is set to “manual” gear shifting (the lever moved towards you you can change only to + and -)
 
Regardless of the selected operating mode, i.e., auto or manual, the downshift paddle does not respond; upshifts work in all cases. Sometimes it happens to wake it up in the way I described earlier: I hold the "-" paddle and at the same time click "+" without releasing the minus, and then it downshifts, so I rule out mechanical damage—it's something with the software.
 
For example with my TCT:
1. In full automatic mode, downshifting works with resistance — it may not respond if I press the paddle with a quick "click" at the height of "-". If I press the paddle halfway along its length for about 1 second it downshifts in about 99% of cases, even if I press down twice in a row, i.e., downshift by two gears.
2. In sequential mode it sometimes doesn’t respond when I click at the height of "-", it works every time when I click at halfway along.
No errors in the gearbox controller, no software update for the gearbox — that’s what the Gdańsk ASO says. I suspect “this model has it” due to a poor-quality paddle switch and the characteristic behavior of the TCT.
 
Hi, I have a problem similar to the author but reversed. The downshift paddle "-" always works correctly (sometimes a bit slower), but the upshift paddle often, instead of shifting up, also tries to shift down, which ends with either a whine from the rev limiter or downshifting to a lower gear.
Has anyone managed to solve your problems? What could help my issue?
 
For me — replacing the paddles. In January/February the problem with the downshift paddle worsened.
I still have extended warranty, so I don’t know the prices — handled under warranty.
They did it in about 45 minutes. For information, paddles apparently do not come separately and you always have to buy a complete set.
 
Hi all, I’d like to refresh the topic a bit. I also have a problem that after pressing the "+" paddle it can drop a gear down... is there anyone who can say more about this? In the last post my colleague wrote that only replacement helps, but I’d like to ask if anyone else has encountered this problem so far? I can’t find original paddles for sale anywhere :/ only question is whether you buy just the paddles (plastics with the "-" and "+" markings) or is there also some electronic component for this? Because I understand the paddle itself is a piece of plastic that helps press some electrostatic thing on the steering wheel? Maybe it can be regenerated somehow? The computer shows no gearbox errors.
 
Hi all, I’d like to refresh the topic a bit. I also have a problem that after pressing the "+" paddle it can drop a gear down... is there anyone who can say more about this? In the last post my colleague wrote that only replacement helps, but I’d like to ask if anyone else has encountered this problem so far? I can’t find original paddles for sale anywhere :/ only question is whether you buy just the paddles (plastics with the "-" and "+" markings) or is there also some electronic component for this? Because I understand the paddle itself is a piece of plastic that helps press something electrostatic located in the steering wheel? Maybe it can be regenerated somehow? The computer shows no gearbox errors.

I have the identical problem: after pressing the ' + ' it can downshift, it doesn’t happen always but quite often. Shifting with the lever works correctly. Zero errors, what is the principle of these buttons? a simple microswitch closing the circuit or as in BMW a microswitch plus resistor and, based on different resistance, does it sense higher/lower gear?
 
I have an identical problem, after pressing the '+' it can sometimes drop the revs, it doesn't happen all the time but quite often. The stalk change works correctly. Zero errors, what is the principle behind these buttons? A regular micro switch closing the circuit or, as with BMW, a micro switch plus a resistor and based on different resistance it sees whether the gear is higher or lower?

we are one of the rare cases, it seems, because the topic has stalled :( probably there is no other way than to go to the authorized service center and have them take a look at it...
 
Practically I don’t use these stalks, so it doesn’t bother me, but in my spare time and once I sort out the wiring diagram I’ll figure it out.
 
I found the electrical diagram and from what I read in the manual, element D047 is our unfortunate paddles. I don’t know anything about electricity and I can’t read any of this... Can I pull any values of voltage or resistance that the individual components should take? If I at least knew which part of the paddle assembly might be causing the problem, I would know who to give it for repairs and what to tell them to replace. obraz_2023-05-03_130314525.jpg
 
I also found this diagram and I see the control is identical to BMW, the controller reads the command based on resistance, probably I’ll tackle it this weekend.
 
Last edited:
the problem with my stalk is solved - I took it apart, cleaned it with contact spray and it works like new! :) I didn’t expect the result, but there it is!
 
the problem with my stalk is solved - I took it apart, cleaned it with contact spray and it works like new! :) I didn’t expect the result, but there it is!

Today I also took it apart, washed everything with contact spray, and for now it works without issues, curious how long it will last.
 
Amortyzatory
Back
Top