• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Replaced engine components - it doesn’t start :(

Oscarhylo

New
Joined
Apr 30, 2022
Messages
2
Car
Alfa Romeo Mito 1.3 jtdm
Hi,

I'll start with the symptoms I noticed.

It choked while driving, there was a Check Engine light.
One day it started turning over longer and longer, and after a week it wouldn’t start at all.

The pipe leading to the turbo is cracked.
Replaced – it still won’t start

Additionally replaced:
Sensors – camshaft position sensor, crankshaft position sensor, fuel pressure sensor
Fuel filter
High-pressure pump x2 !!!
Fuel pump

The computer shows one fault:

No pressure on the high-pressure pump.

The mechanics are at a loss. It still won’t start.
Return pressure is minimal.

No idea what could be wrong with it. I’m at my wit’s end.

Has anyone had similar symptoms?

Regards
 
What pressure does the pump deliver in the tank and what pressure do you have on the CR rail during starting attempts?

Did you replace the pressure regulator on the pump along with the pump?

Sent from my M2007J3SY using Tapatalka
 
Amortyzatory
Back
Top