• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Problems when checking errors with MES

bartek15

Member
Joined
Jun 2, 2021
Messages
148
Car
Stelvio 2.0 280KM
Hello,

I connected the car to MES yesterday, version still from the era when I had a Doblo (3.6) but it seems to work because it connects without problems. I clicked error checking from all modules and during this process on the dashboard I started receiving messages about gradually shutting down systems (driving assistant uphill, etc.), so fearing I might cause additional problems I interrupted the process, unplugged the computer, and after starting the car thankfully everything worked normally. Is this normal behavior during error checking? Best regards
 
Yes, it is normal, MES or alfaobd when testing modules turns on the ECU test which causes such an effect; after reading the errors everything returns to normal.

Sent from my SM-G970F using Tapatalka
 
I’ll jump in with a question to the topic. Can AlfaOBD Demo be used to align a Giulietta? The previous owner of the car presumably changed the battery and my odometer is blinking. I know I would need a yellow adapter for Alfa, but the question is whether the demo version can do this alignment so the km meter stops blinking?
 
Amortyzatory
Back
Top