• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

mud flaps

Lutraki

New
Joined
Feb 9, 2010
Messages
547
Location
Warszawa
Car
Mito Distinctive 1.4 MPI MultiAir 16v 105 KM
Hello,
Does anyone have mud flaps? I don’t like the ones in the photo because of their texture.
In another thread kt0sfajny sent such a photo found on the internet Mito mud flaps? I don’t like the ones in the photo because of the texture.
In another threadkt0sfajny
sent such a photo found on the internet
 
I had original (by AR) mud flaps on the AR156. While at the front they had some justification, at the back they weren’t needed for anything. Additionally, when driving onto curbs they got in the way and scraped the road, and while moving they peeled off the paint from the sills.
 
I noticed small scratches on the front fenders:(. I must have driven into some stuff that scratched the paint. I don’t recall anything like that. Is there any way to prevent such situations, e.g. by installing mud flaps ???
 
Hello,
Does anyone have mud flaps? I don’t like the ones in the photo because of their texture.
In another thread Mito kt0sfajnysent such a photo found on the internet
even though they probably perfectly fulfill their function, truly disgusting :D:D

---------- Post added at 13:52 ---------- The previous post was written at 13:50 ----------

I noticed small scratches on the front fenders:(. I must have driven into some stuff that scratched the paint. I don’t recall anything like that. Is there any way to prevent such situations, e.g. by installing mud flaps ???

on the fenders?
generally the paint is so weak that it will scratch anyway

on the fenders?
generally the paint is so weak that it will scratch anyway
 
where can you buy original mud flaps for the front for Mito

There are no original ones, mud flaps are installed by Januszes :) I don’t understand how one can mutilate their car like that. Mito?
 
There aren’t any originals, mud flaps are installed by Januses :) I don’t understand how one can ruin their car like that.
 
There are no originals, splash guards are worn by Januses :) I don’t understand how you can mutilate a car like that.

You could just as well write that only Januses buy MiTo in a Diesel :) Such the same quality of comparison...
 
Last edited:
Besides splash guards you can also fit door-window visors, a sheet over the front windshield in winter, a pedal guard bar with the steering wheel and seat covers must be in a " zebra" pattern. I bought Mito in a diesel, because 70-78 HP in petrol is too little for me, I crossed out MultiAir right away and then I had nothing to choose from :) Happy New Year!!
 
Last edited:
52363BF3-C569-4A21-AB90-B0868B5DEC80.jpg5541C07A-66A6-410C-A5BB-E6277DCBB5A7.jpgHi I installed in my mito own-made 'mini splash guards' made on a 3D printer because I was annoyed by the dirt accumulating in the gap between the fender and the door visible when you open the door. The splash guards are small, neat, not conspicuous and they do their job
 

Attachments

  • A44CEEDE-9869-4869-B376-E80E593F349A.jpeg
    A44CEEDE-9869-4869-B376-E80E593F349A.jpeg
    140.5 KB · Views: 24
Last edited:
View attachment 264725View attachment 264708Hi I installed in my mito own-made 'mini splash guards' made on a 3D printer because I was annoyed by the dirt accumulating in the gap between the fender and the door visible when you open the door. The splash guards are small, neat, not conspicuous and they do their job

Hi,

and which part did you screw them to?
Wouldn’t you like to repeat the production process and sell me a complete set? I also get frustrated when I open the doors...
 
Amortyzatory
Back
Top