Error in ecuscan neutral gear sensor, does anyone know where it is located? Can I replace it myself and "check" ?
The check error appears when in reverse and once in 3rd gear
yes, I suspected so, from above you can only see the connector and the wire "probably" from this sensor. it will be hard to access it
Image found on the net
Okay I was at a mechanic, getting to the sensor is possible only from underneath myself. the exhaust is unscrewed, the heat shield removed and the whole lever down. Then we open the box under the lever where the idle sensor is located, for me two wires were torn, soldered and assembled back together, it's okay.
Zarejestruj się i korzystaj z forum bez rozpraszających banerów reklamowych.
Jako zalogowany użytkownik zyskujesz wygodniejszy dostęp do treści, możliwość komentowania, korzystania z prywatnych wiadomości i pełne wsparcie społeczności.
Nie zajmuje to długo, a różnica w komforcie przeglądania naprawdę robi wrażenie! 💡🎉
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.