• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Front stabilizer bushing replacement, problem.

Joined
Jun 6, 2015
Messages
23
Location
Powiat Suski
Car
Alfa Romeo Giulietta 1,6JTD Alfa Romeo Giulia 2.0 Q4
Hello, I wanted to replace the stabilizer bushings in the front Giulietta but my mechanic says that you can't replace only the inner bushings, you also have to replace those metal seats which I can't buy anywhere? Has anyone gone through this topic? Because I don’t feel like replacing the whole stabilizer.
I'm attaching a photo of the component in question.
 

Attachments

  • IMG_20200729_191039.jpg
    IMG_20200729_191039.jpg
    53 KB · Views: 105
You’re tearing out the mounting sleeves that connect the sheets, you replace the bushes and you’re done.
 
And why? I’ve replaced only the bushes and everything works. The stabilizer is about 800 PLN, and the bushes you can buy for not even a hundred.
 
I replaced it myself, but behind the bushes and you just need to loosen the clamps. And by the way, is it possible to replace the front bushes without removing the control arms? Because access to the stabilizer looks poor... Replacing the rear is easy.
 
Exactly, why? But it’s not our money, not our car[emoji56]

I’m not replacing it myself, only my mechanic claimed that you need new metal plates for the stabilizer bushes. I’ll tell him to do as you say, split the plates and replace the bushes, thanks :)
 
Amortyzatory
Back
Top