• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

[Giulietta] Chrome window trim - replacement

Joined
Oct 5, 2014
Messages
2
Car
Alfa Romeo Giulietta 2.0 JTDM-2 140 KM
Hello everyone,

I am the happy owner of a black Julka, but since I bought it used I didn’t have influence over some details, hence my question:

Is it possible to replace the window trim around the side windows with chrome ones without major problems?

And if such a thing can be done, how much might it cost?

I’d just add that after fairly long searches on Allegro I found such trims but only for one door (I'm talking about the set, not just the lower horizontal one).

If the topic has been discussed before, I apologize in advance for repeating (I used the search :) )
 
I’m chiming in on the question: on my car the lower right rear door trim was clearly damaged by some amateur and now it slightly rattles. How should I dismantle it so as not to damage the element?
 
yes you can, it’s possible but costs a lot... there’s quite a bit of fuss with it because you have to replace the entire frame... I also thought about doing it once but gave up, I think around 800 EUR three years ago, so I don’t remember exactly

Call the dealership and they’ll tell you how much it costs :) but certainly not cheap
 
@dziadzia82

do you perhaps have a photo (close-up) of how this tape looks glued to the rubber seal?

I understand, that you mounted it this way on your Punto?
 
it probably won’t look very good in the Julka case where the window surround is rubber and semi-circular; such a trim would protrude by a few millimeters, which will be visible from close range. If you’re going to wrap it, use a flat chrome tape
 
I won’t start a new thread, has anyone replaced the above-mentioned trims? I have chrome ones, a friend in his black Julka has black. I’d like to swap with him. Question: is dismantling and reassembling possible? I’m a bit worried about scrapes and sealing, fit? But they won’t insert new trims, only swap from car to car.
 
The point is where you don’t see it. Visual - if you have an entirely black car + silver alloys, then chrome trims will match. If you have a white car (black roof + dark graphite wheels), chrome doesn’t match as well... for one it doesn’t matter, for another it does. Taste question. No one asked about sense, only whether someone has done it by swapping used trims, not buying a new complete set that was never installed before.
 
The point is where you don’t see it. Visual - if you have an entirely black car + silver alloys, then chrome trims will match. If you have a white car (black roof + dark graphite wheels), chrome trims don’t fit as well...
For one it doesn’t matter, for another it does. Taste. No one asked about sense, only whether someone has done it by swapping used ones, not buying a new complete that was never installed before.

Has anyone managed to replace with trims yet? I’m curious about removal/installation options. On my Julka the chrome trim on the front-right door sticks out badly, the upper one. Unfortunately it doesn’t hold to the door frame. The seal can be pressed onto the frame, but it soon slides off.
I considered replacing the whole thing, but a sensible option seems to be only replacing with a new one; at the dealer they quoted probably 800 PLN. From what I see above, the price likely reflects that the seal is factory-integrated with the frame?
The second solution might be to use some adhesive for rubber.
 

Related threads

Amortyzatory
Back
Top