• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Check Engine Icon!! Please help

Joined
Feb 25, 2014
Messages
8
Location
Poznań
Car
Alfa Romeo MiTo, 1.4 TB
Hello,

I am a new forum user, about 2 months ago I bought a Alfa Romeo MiTo 1.4. Today, driving to work, after about 1 kilometer, while driving smoothly, the car seemed to slow down a bit on its own, then it let off and the entire tree of symbols on the dashboard lit up. The engine icon appeared, the start/stop system shut off, the stability control system shut off. I got to work, contacted a service in Poznań, went to them (the icons were still lit on the dashboard). I scheduled today for the computer at 5 PM, I didn’t leave the car with them because I don’t live far away. After starting the car again, all the icons went out, during the drive nothing else lit up.

What is going on?

Is it worth putting it on a diagnostic computer? They charge 150 PLN for that!!

Please share your opinion :)

Regards,

Andrzej
 
Last edited:
That was a temporary fault (e.g., a loss of electrical contact at a plug) - if the light went out now, in my opinion it’s not worth spending 150 PLN to satisfy curiosity - unless you’re curious... In the future, if you encounter something like this, stop, turn off the engine and restart
 
Spend that 150 PLN on Multiecuscan and buy an ELM327 interface. It will pay for itself after the first use.
 
Hi,

I today had my first check engine...
Unfortunately, after turning the engine off, it didn’t go away, so I bought an OBD2 WiFi (for iPhone) like this:
http://allegro.pl/obd-2-ii-wifi-ios-elm327-ver-1-5-elm-327-iphone-i4227632103.html

P0016 came up, I think something not good with the belt? Does anyone have experience with this fault?

attachment.php

Regards
 

Attachments

  • P0016.jpg
    P0016.jpg
    55.1 KB · Views: 404
Thanks euroscan, but after reading it these procedures are not doable by myself...
If I cleared the fault and it does not appear, should I leave it and observe whether it is serious enough to go to a workshop?
 
If the cleared fault does not recur after starting the engine, it is treated as a random fault. Faults can also be cleared by disconnecting the battery power for at least 30 minutes
 
Unfortunately, my P0016 fault appeared again (after 2 days) so I guess a visit to the service will be necessary :(
 
Amortyzatory
Back
Top