• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Buzzing

bogas

New
Joined
Jul 27, 2010
Messages
382
Location
Jaworzno
Car
MiTo 1,4MATB 135KM
Something in the range of 2.5-3k rpm. I replaced the flexible coupling and it’s still there. Something either loosened or unscrewed and it’s irritating. Does anyone have any idea?
 
Turbo shield, manifold, catalyst.
 
I’ve had the same lately, I’ll look when it gets warmer.

From initial inspection, I removed the engine cover and stuck a block between the thermal shield T and it seems to make less noise.
 
in this video the guy talks about boost fluctuation, and we’re talking about the buzzing plate.
 
for me it’s the top plate that buzzes, it’s designed so it has two spacer-bushings that hold the plate and it’s screwed to the turbo through them, and those spacers are already loose, causing its vibrations, you can’t tighten it much either because of their construction.
 
If you have play on that linkage, it buzzes, I had this on mine and it helped.

Recently I was chasing a strange buzz that appeared after releasing the throttle; after removing all shields around the turbo I found the culprit — a blocked lever in a position slightly open, causing the plate closing to fall into vibration. The previous owner serviced the car regularly and none of the mechanics noticed that the linkage didn’t move at all — 30 minutes of fiddling with rust remover and you can again close/open it with your fingers :)
 
Amortyzatory
Back
Top