• Jeśli chcesz dodać swojej Alfie charakteru i jednocześnie zaznaczyć przynależność do naszej społeczności – to dobry moment, żeby je zamówić.

    Ramki Alfaholicy

    Szczegóły, zdjęcia oraz informacje o zamówieniu znajdziesz tutaj.

    Nie czekaj, bo jak zwykle schodzą szybko.

Automatic locking

west_23

BANNED
Joined
Sep 27, 2016
Messages
140
Location
https://t.me/pump_upp
Car
Stelvio 2.0; Giulietta 1.4 multiair
Does your car shut automatically after opening with the remote, and you don’t open the doors or trunk for a while? I’ve had this in all my previous cars, but here it isn’t and I don’t know if there’s something wrong with my unit or if Julka is like this?
 
I still have a Stilo and Bravo, there isn’t an alarm there either and the locking works. It’s a protection so the car locks itself when you accidentally press the open on the remote.
I’ve had such cases twice, that in the morning I go to the car and the car is open. I see that Alfa it didn’t do well with that in Julka.
 
The car locks only when you press the unlock button for the car and you don’t open it within 30 seconds for the doors or trunk. So there’s no possibility of leaving the keys in the car.
 
Isn’t it hard to install such an alarm yourself? For me the installer wants 1000 PLN for SEO installation.
 
Does your car automatically lock after you open it with the remote and you don’t open the doors or the trunk for a while?
I had this in all my previous cars but not here, and I don’t know if something is wrong with my unit or if Julka has this feature?

I have the same, Julka doesn’t lock by itself.
 
Last edited:
I still have Stilo and Bravo, there isn’t an alarm there either and the auto lock works. It’s a safety feature so the car locks itself when you inadvertently press the open on the remote.
I’ve had two instances where in the morning I go to the car and it’s open. I see that Alfa it didn’t deliver for Julka.

see? that’s interesting... mine locks automatically ;p

ps.: and to ask something silly, did you enable the "auto close" option in the settings? ;]

- - - Updated - - -

The car locks only when you press the car opening button and not if you leave the door or trunk open for 30 seconds. So there’s no possibility of leaving keys in the car.

of course it exists - you just need to open the trunk lid and mindlessly leave the keys on the shelf and close the lid ;)
 
ps.: and to ask something silly, did you enable the "auto close" option in the settings? ;]

"Autoclose (Automatic central locking of the car while driving)
This function, if previously activated (On), enables
automatic locking of the doors after exceeding a speed
20 km/h."


of course it exists - you just need to open the trunk lid and mindlessly leave the keys on the shelf and close the lid

Here the self-closing function has nothing to do with it.
 
"Autoclose (Automatic central locking of the car while driving)
This function, if previously activated (On), enables
automatic locking of the doors after exceeding a speed
20 km/h."

wow you’ve just hit my ambition ;] I understand you quoted the manual and you’re sure that’s all that happens when enabled and that in both menus there is only one such position? ;]


Here the self-closing function has nothing to do with it.

these must be some ghosts blocking the trunk, and I was stupid thinking it’s the self-closing feature ;p
 
Seems like you guys didn’t understand each other. The auto close function activates at 20 km/h, locks the locks until the doors are opened. The function that west_23 writes about is that if we accidentally press the remote to open the car and do not open the doors for the next 30 seconds, the car will automatically relock/lock the central lock again. Useful function but not available from the factory in our cars. Even from the manual it shows page 14 / Julka 2013 / that the alarm arms automatically but does not lock the locks after closing the doors / not with the remote. I am in the process of choosing an car alarm - only because there is no information about proper closing of the car from the remote. Analyzing the various schematics whether SEO or Proxima etc., I come to the conclusion that CAN-based alarms only have control from bus reading. So they are informed e.g. that I lock the central and the ignition isn’t on. These alarms cannot send to the CAN network a command like ..lock the central etc. So they won’t perform the function west_23 mentions .. rearming. Unless we connect them analogically through an appropriate central lock controller. I’m thinking more and more whether to install an analog alarm and gather the necessary control signals from the body. Not clutter the CAN bus with extra receivers while saving half the money.
An additional argument for is the fact that CAN alarms do not electronically block the engine CODE or send anything to the CAN network. And we need to do some cut-off anyway :) so we don’t see a car driving away with a howling siren.
 
Last edited:
president01.. I have had the pre-facelift for 6 months and I can’t find this / rearming. Maybe you can tell us how to enable it..??

autoclose.jpg
 
Last edited:
Amortyzatory
Back
Top